HVAC & Plumbing Services in Cleveland, OH

Completed scheduled preventive maintenance on residential split-system air conditioning unit. Performed comprehensive inspection of rooftop condenser unit and indoor air handler/furnace system. Checked refrigerant lines, electrical connections, and overall system operation. All components found to be functioning within normal parameters. Discussed customer inquiry regarding conversion of existing wireless thermostat to hardwired configuration for improved reliability and system integration.

# HVAC Cooling Maintenance Completed Performed comprehensive cooling system maintenance on residential HVAC unit. Conducted electrical diagnostics using digital clamp meter to verify proper amperage draw and voltage levels across system components. Measured current flow on compressor circuit, confirming readings within manufacturer specifications at 0.54 amps on control circuit. Inspected and tested low-voltage control wiring, including thermostat connections with multiple conductor bundle showing proper color coding and secure terminations. Verified electrical panel connections and control board functionality. All voltage readings confirmed within acceptable CAT IV 600V parameters. System tested and operating normally with proper electrical values throughout cooling cycle.

Completed contract cooling tune-up on residential Airtemp furnace system. During inspection, discovered severe frost accumulation on supply ductwork in attic space, with surface temperature measuring 51.6°F, indicating significant airflow restriction or refrigerant issue affecting cooling performance. Documented equipment condition and duct frost buildup for further diagnostic evaluation and necessary repairs to restore proper system operation.

Completed comprehensive cooling tune-up on Ameristar residential air conditioning system. Performed visual inspection of condenser unit, verified proper operation of all components, and inspected heat exchanger coils which were found to be in clean, well-maintained condition with no blockages or deterioration noted.

Completed comprehensive cooling system tune-up on residential HVAC unit. Performed diagnostic testing using digital multimeter to verify electrical readings and system performance, inspected compressor operation with CoreSense diagnostic tool, and checked refrigerant pressures with manifold gauges. All components operating within normal parameters, capacitor date verified, and system confirmed ready for continued service.

Completed installation of ductless mini-split HVAC system including electrical infrastructure setup. Installed sub panel and dedicated circuit to support the new system, mounted interior wall unit in conditioned space, and positioned Daikin outdoor condenser unit on exterior of residence. All electrical work, refrigerant lines, and system components were installed and commissioned on the same day for immediate operation.

Installed new Siemens sub panel and circuit breaker system with 15 amp maximum capacity rated at 11.1 minimum amps. Completed full electrical panel installation including proper circuit breaker arrangement, wire routing, and ground bar connections with appropriate color-coded wiring throughout the enclosure. All circuits were properly labeled for identification, including A/C condenser and other designated loads, and the panel was mounted on plywood backing with all connections secured to code specifications.

Completed full HVAC system installation including 96% efficiency furnace, air conditioning unit, and S-Series RTU package. Performed comprehensive electrical connections, verified all wiring configurations, tested system components with digital multimeter to ensure proper voltage and functionality, and confirmed successful operation of complete heating and cooling system.

Completed scheduled preventive maintenance on residential cooling system. Performed comprehensive inspection of HVAC equipment including ductwork temperature verification in attic space, recording supply air temperature at 70.3°F, and confirmed proper airflow through return air grille with clean filter media and unobstructed louvers. All system components operating within normal parameters with no deficiencies noted.

Completed preventive maintenance inspection on Carrier HVAC system. Performed standard cooling season checkup including system diagnostics and temperature readings within the air handler unit, which measured 155°F at the time of inspection. Verified proper operation of furnace and associated equipment, inspected PVC venting system for proper configuration, and ensured all components were functioning correctly for the upcoming cooling season.

Responded to service call for air conditioning unit leaking water. Upon inspection, discovered severely corroded evaporator coil with significant rust and oxidation throughout the heat exchanger assembly. The coil showed advanced deterioration consistent with age and prolonged moisture exposure, which was the source of the water leak. Identified compromised condensate drainage system with PVC drain line showing signs of improper pitch or blockage contributing to water backup. Documented existing conditions with photographs showing extent of corrosion on copper tubing, fins, and internal components. Advised customer that the evaporator coil has reached end of serviceable life and requires replacement to resolve the leak issue permanently. Discussed options for repair versus system replacement given the advanced age and condition of the equipment.

Conducted on-site assessment for complete HVAC system replacement in commercial building with interior stairwell access. Evaluated existing ductwork configuration in ceiling area and documented measurements of access points to determine equipment specifications and installation requirements for full system upgrade.

Completed routine cooling maintenance on two HVAC systems located in basement mechanical room. Performed standard preventive maintenance procedures including inspection of air handlers, ductwork connections, condensate drainage systems, and overall equipment operation. Both units were found in functional condition and operating within normal parameters.

Performed comprehensive cooling system maintenance on HVAC unit. Conducted electrical diagnostics using digital clamp meter, verifying voltage readings at 930.0V and amperage draw at 49.78A on primary circuit, with secondary measurements showing 5.67A draw. Inspected all electrical components within control panel including capacitor, wire connections, and terminal blocks, confirming proper operation and secure connections throughout the system.

Performed routine cooling season tune-up on residential Amana air conditioning system. Inspected outdoor condenser unit, Emerson control board, and electrical connections; verified proper operation of all system components. All systems found to be functioning within normal parameters at time of service.

Responded to service call for clogged toilet and sink in residential bathroom. Upon arrival, assessed the bathroom fixtures and determined blockages in both the toilet drain line and vanity sink. Successfully cleared the obstruction in the sink drain using appropriate plumbing tools, restoring proper water flow and drainage. Cleared the toilet blockage, ensuring complete flushing function was restored. Tested both fixtures to verify proper operation and drainage before completing the service.

Performed scheduled generator maintenance and conducted comprehensive battery system analysis using Viking diagnostic equipment. Battery testing confirmed system passed all parameters with acceptable voltage readings and charge capacity, indicating generator starting system is in good operational condition.

Conducted HVAC estimate with focus on indoor air quality assessment for whole-home dehumidification system. Evaluated existing mechanical space conditions, including utility room layout and current HVAC infrastructure, to determine optimal placement and integration requirements for dehumidifier installation. Documented equipment locations, available utility connections, and environmental conditions to prepare comprehensive quote for IAQ improvement solution.

Performed comprehensive system diagnostics on HVAC unit. Installed surge protector to safeguard electrical components from power fluctuations. Replaced failed capacitor to restore proper compressor and fan motor operation. Conducted leak test on refrigerant system, identified and sealed leak points, then evacuated and recharged system to manufacturer specifications. System tested and verified operational upon completion.

Completed comprehensive plumbing inspection of residential basement area, examining exposed water supply lines, drainage systems, and gas piping infrastructure. Documented existing conditions including PVC drainage pipes, copper supply lines, and yellow CSST gas lines for maintenance records. Provided estimate for installation of new exterior hose bib at rear of property.