HVAC & Plumbing Services in Cleveland, OH

Installed new electrical junction box in attic space to address wiring concerns. Replaced dual toggle switch and cover plate, ensuring proper operation and secure mounting to wall surface.

Completed full system replacement estimate for aging HVAC system from the 1980's. Assessed existing equipment including furnace, evaporator coil, ductwork, and filtration system in confined attic space, documenting current conditions and presenting multiple replacement options to customer.

Conducted on-site assessment of aging boiler system exceeding 30 years of service in older residential property. Evaluated existing hydronic heating infrastructure including cast iron radiators with vertical fin design and associated supply/return piping connections. Documented current system condition through photographic records showing original radiator installations with floor-mounted valve assemblies and visible deterioration indicators. Provided homeowner with replacement boiler options and recommendations for system upgrade to improve heating efficiency and reliability given the advanced age of existing equipment.

Completed comprehensive cooling system maintenance inspection on HVAC unit. Performed electrical diagnostics using digital multimeter to verify proper voltage and amperage readings at control board and throughout the system. Inspected all electrical connections, capacitors, relays, and color-coded wiring harnesses within the unit compartment, confirming secure connections and proper component function for safe and efficient operation.

Responded to HVAC service call for air conditioning system with damaged wiring caused by rodent activity. Upon inspection, confirmed groundhog had chewed through electrical wiring to the outdoor condensing unit. Customer declined same-day repair of the damaged wiring.

Completed routine cooling season maintenance on residential HVAC system. Performed comprehensive inspection of all mechanical and electrical components, including furnace cabinet interior, control board, blower motor assembly, condensate drainage system, and ductwork connections. Verified proper operation of all system controls, checked electrical connections for security and signs of wear, and confirmed condensate trap and drainage lines are clear and functioning correctly. All components found operating within normal parameters with no immediate service needs identified.

Conducted on-site evaluation for mini split installation options. Assessed existing electrical infrastructure including main panel and Sub Panel 'A', documenting current circuit breaker configuration and available capacity to determine feasibility and requirements for mini split system integration. Photographed electrical panels to support equipment sizing recommendations and installation planning.

Completed scheduled cooling system maintenance on residential air conditioning unit. Performed comprehensive inspection of outdoor condensing unit, verified electrical parameters using digital multimeter, and measured system temperatures with calibrated digital thermometer recording 69.8°F. All components operating within normal specifications and unit functioning properly for continued cooling season operation.

Completed scheduled cooling system maintenance on outdoor HVAC unit. Inspected condenser fan assembly, motor housing, and protective grille which showed normal weathering and corrosion consistent with outdoor exposure. Examined electrical disconnect and Cutler-Hammer components, verified proper labeling and safety warnings visible. Unit operational with all components functioning within normal parameters at time of inspection.

Completed installation of Unico air handler system with coil for heat pump application. Wired control terminal block with proper 24V connections and verified all electrical terminations at the unit. Installed exterior condenser units on concrete pad with proper refrigerant line connections and confirmed system operational with service financing approval.

Completed electrical inspection of residential service entrance and main distribution panel. Documented exterior meter installation, service conduit routing, and associated utility connections mounted on brick exterior wall. Verified proper installation of flexible conduit connecting to ground-level equipment. Inspected interior main electrical panel containing split-bus configuration with dual main breaker assemblies and approximately 20-24 branch circuit breakers. Confirmed proper wire routing, conductor organization, and grounding connections throughout panel. All circuit breakers, wire terminations, and electrical connections photographed for record.

Completed preventive maintenance on two rooftop air conditioning units. Performed comprehensive inspection of both systems, including examination of condenser coils, fan motors, electrical connections, and refrigerant levels. Both units were found to be in operational condition with no immediate repairs required at time of service.

Completed routine cooling maintenance on residential heat pump system. Inspected outdoor condensing unit, electrical disconnect, and all accessible components. Verified proper operation of unit mounted on vibration-dampening pad with adequate clearance from building structure. Confirmed electrical connections at disconnect box secure, refrigerant lines intact, and unit operating within normal parameters for seasonal cooling performance.

Performed HVAC service call on air conditioning system. Inspected air handler unit and condensate drainage system. Found standing water in drain pan with visible staining and discoloration indicating drainage issues. Examined PVC condensate line configuration with trap assembly. Noted significant rust-colored mineral deposits and water staining on drain pan surface. Documented moisture accumulation and high humidity conditions within cabinet. Tested and evaluated drainage components including trap assembly and discharge piping. System components assessed for proper operation and water removal functionality.

# HVAC Cooling Maintenance Completed Performed comprehensive cooling season maintenance on residential HVAC system consisting of Lennox furnace unit with integrated air handler. Conducted thorough inspection of all accessible mechanical and electrical components within both units. Verified proper operation of blower motor assembly, examined gas valve components, and inspected all electrical connections including capacitors and pressure switches for signs of wear or deterioration. Evaluated condition of pleated air filters in air handler compartment and confirmed adequate airflow through system. Inspected flexible metal ductwork connections for proper sealing and structural integrity. All safety labels and manufacturer specifications were reviewed to ensure compliance with operational standards. System components showed normal wear consistent with age of installation, with no immediate service concerns identified. Unit remains in functional operating condition for continued cooling s

Completed cooling system tune-up on residential HVAC unit. Performed temperature diagnostics at supply duct measuring 58.4°F and electrical measurements at outdoor condensing unit showing 69.9V and 11.1A readings, confirming proper system operation and airflow performance.

Replaced failed thermostatic expansion valve (TXV) on HVAC system under limited warranty coverage. Connected manifold gauges to verify proper refrigerant charge and system operation following component replacement, with temperature readings confirming system restored to normal operating parameters.

Responded to service call for air conditioning system not maintaining desired temperature at thermostat setpoint. Upon arrival, found 20-year-old outdoor condensing unit with aged electrical components showing significant wear and weathering. Performed diagnostic evaluation of system operation and inspected electrical connections including contactor and run capacitor. Documented condition of electrical components with photographs showing deteriorated wiring insulation, dust accumulation, and aged capacitor with faded labeling. Confirmed best contact number for follow-up communication regarding system performance and repair recommendations for aging equipment.

Completed first-year preventive maintenance on residential cooling system under MVP agreement. Performed comprehensive system inspection including electrical measurements, compressor diagnostics using CoreSense equipment for Copeland scroll compressor, and capacitor testing. All components operating within normal parameters; no deficiencies found requiring immediate attention.

Provided comprehensive estimate for complete HVAC system replacement including furnace and air conditioning unit for residential property with balcony access and elevator availability. Evaluated existing split system configuration with indoor furnace located in utility closet and outdoor condensing unit positioned on concrete pad in landscaped side yard area. Presented two replacement options: standard full system replacement and premium Unico high-velocity heat pump system to address customer's heating and cooling needs.