Air Conditioning, Heating, and Plumbing Services in Hudson, OH

Completed routine HVAC cooling system maintenance inspection. Accessed internal components through equipment panels to assess condition of ductwork, drainage piping, and mechanical assemblies. All components examined and found to be operational with normal wear patterns observed.

Completed full HVAC system installation including 80% efficiency furnace, air conditioning unit, and humidifier from the S Series product line. Installed Amana condenser unit on exterior concrete pad with proper refrigerant line connections and electrical disconnect. Verified system operation with temperature readings showing 58.2°F at evaporator coil, confirming proper cooling performance and adequate condensation formation. All equipment mounted securely with drainage lines properly routed through exterior wall.

Completed comprehensive heating and cooling maintenance on two HVAC systems, performing standard diagnostic testing and measurements to verify proper system operation. Temperature differential readings were recorded using digital instrumentation to confirm adequate cooling and heating performance across both units, with all systems operating within manufacturer specifications.

Performed comprehensive preventive maintenance on residential split-system HVAC cooling equipment. Inspected indoor furnace unit and outdoor condensing unit, verifying proper operation of all electrical components including capacitor, contactor, and control wiring connections. Confirmed gas furnace burner assembly condition, checked condensate drainage system, and documented equipment status through detailed photographic records. All systems tested and found operating within normal parameters with no deficiencies noted at time of service.

Performed routine maintenance on tanked water heater system, including complete flush procedure to remove sediment buildup and ensure optimal performance. Inspected all connections, valves, and associated components including expansion tank, copper supply lines, and brass fittings, confirming proper operation and no visible leaks or deterioration throughout the system.

Completed comprehensive cooling maintenance on 8 MVP system. Inspected refrigerant line connections, verified proper installation of condensate drain lines, and documented coil cleaning procedures per manufacturer specifications. Confirmed all supply registers operating correctly with proper airflow direction.

Completed plumbing inspection of basement utility area to assess gas line installation requirements. Documented existing mechanical systems, including furnace, water heater, water treatment equipment, and current pipe routing through ceiling joists to determine optimal path and materials needed for new gas line installation.

Completed preventive maintenance service on two HVAC cooling systems. Performed comprehensive system inspections including electrical testing with digital multimeter to verify proper voltage and amperage readings at outdoor condenser units. Checked indoor air handler components, wiring connections, and mechanical operations. All systems operating within manufacturer specifications with no deficiencies noted.

# HVAC Cooling Maintenance Completed Performed comprehensive preventive maintenance on residential air conditioning system as part of scheduled cooling season service. Conducted thorough inspection of outdoor condensing unit, noting accumulation of landscaping mulch and organic debris around refrigerant line connections and base of equipment. Cleared debris from around piping and valve assemblies to ensure proper airflow and prevent potential corrosion or pest intrusion. Accessed electrical control panel and inspected internal components including capacitor, contactor, and associated wiring connections. Verified all electrical connections were secure with proper wire terminations. Capacitor tested within acceptable parameters. Contactor examined for signs of pitting or wear on contact points. Refrigerant lines inspected for signs of leakage or deterioration, with copper tubing showing normal surface oxidation consistent with age. All mechanical and electrical components found to be i

Completed scheduled preventive maintenance on residential cooling system. Performed comprehensive inspection of indoor blower motor assembly, verifying proper operation and electrical connections, and outdoor condensing unit. Cleaned condenser coils, checked refrigerant levels, tested system performance, and confirmed all components operating within manufacturer specifications. System running efficiently with no issues identified.

Completed scheduled cooling system maintenance on residential outdoor condensing unit. Performed comprehensive inspection of condenser components, checked electrical connections and capacitor operation, verified proper airflow through louvered panels, and ensured unit was operating within manufacturer specifications. System tested and confirmed ready for cooling season operation.

Completed comprehensive cooling maintenance on dual HVAC systems. Inspected and tested dual capacitor (40/5µF, 440VAC) which showed signs of oil leakage and discoloration on lower casing, indicating potential failure risk. Verified proper electrical connections at exterior disconnect box, confirmed all safety labeling intact, and documented system components with photographic records for maintenance history. Both systems operational upon completion with capacitor flagged for monitoring or replacement consideration.

Installed new electrical line to lamp post in landscaped area adjacent to building foundation. Coordinated trenching work with property supply contractor and utility locate services prior to installation. Completed lamp post electrical connection and verified proper operation of fixture.

Conducted comprehensive evaluation of 22-year-old residential HVAC system experiencing operational issues. Inspected existing furnace, air handler, and associated electrical connections in basement mechanical room. Documented current equipment condition, including blue air handler unit with visible dust accumulation and existing ductwork configuration. Reviewed electrical panel showing dedicated furnace circuit and Square D Load Center specifications. Provided homeowner with multiple replacement options for aging system to address reliability concerns and improve heating performance.

Completed comprehensive estimate for full HVAC system replacement on aging 1990s-era equipment. Evaluated existing basement-mounted air handler with galvanized sheet metal ductwork distribution system and exterior cylindrical condenser unit installed at foundation level. Documented current system configuration including main plenum, flexible duct connections, and mechanical equipment placement. Presented multiple replacement options for complete heating and cooling system upgrade to modern, energy-efficient equipment.

Conducted HVAC system replacement estimate at residential property. Evaluated existing Trane unit model TOH2B0080A91A/NP4 and assessed installation site conditions including structural framing, electrical wiring configuration, and accessibility requirements for new equipment installation. Documented current system specifications and photographed unit identification information along with workspace layout to develop comprehensive replacement options for homeowner consideration.

Completed comprehensive cooling maintenance on HVAC system. Upon inspection, discovered deteriorated fiberglass insulation in equipment housing with significant age-related degradation and discoloration. Assessed electrical connections and wiring condition, noting accumulated dust and debris throughout accessible components. Performed standard cooling system tune-up procedures including electrical testing with clamp meter to verify proper amperage draw and system performance. Documented existing conditions showing older installation with environmental contamination present in mechanical compartment and electrical panel areas requiring attention during future service intervals.

Provided comprehensive quote for water heater upgrade, replacing existing 40-gallon unit in basement with new 75-gallon capacity water heater to meet increased hot water demand. Scope includes installation of upgraded 4-inch flue exhaust system to replace current 3-inch flue for proper venting of larger unit, removal of hot side valve, and completion of all necessary plumbing connections to integrate new water heater into existing system. Additionally identified leaking shut-off valve at exterior hose bib requiring repair or replacement.

Replaced faulty ball valve and shutoff valve on water heater supply line. Installed new brass fittings and tested system for proper operation and leak-free connections.

Conducted comprehensive assessment of existing flat roof HVAC system showing significant deterioration and corrosion at refrigerant line penetration points. Documented current equipment configuration and measured installation space requirements for complete system replacement, including furnace clearances and ductwork layout specifications.