Air Conditioning, Heating, and Plumbing Services in Hudson, OH

Completed comprehensive cooling system tune-up and inspection. Performed visual inspection of electrical components including Inteli-ignition control board and capacitor (CAP050300440CS), verified all wire connections secure and properly terminated. All system components found operating within normal parameters.

Conducted comprehensive HVAC system replacement estimate consultation for large residential property exceeding 3000 square feet with basement-mounted equipment utilizing natural gas energy source. Presented three-tier system replacement options featuring complete heating and cooling solutions, including Good tier system with up to 13.4 SEER air conditioning unit paired with 80% AFUE gas furnace, Better tier system offering up to 14 SEER cooling with 96% AFUE high-efficiency furnace, and Best tier premium system providing up to 16 SEER air conditioning with 96% AFUE gas furnace for optimal energy performance. Documented existing mechanical infrastructure including electrical service panel with labeled circuits for HVAC equipment, kitchen appliances, lighting, dryer, disposal, sump pump, and range, noting current system connections and power supply configuration. Inspected and photographed existing ductwork penetration through concrete block foundation wall, observing galvanized metal su

Performed comprehensive preventive maintenance on aging residential cooling system. Conducted electrical diagnostics on outdoor condensing unit using digital clamp meter, measuring amperage draw and verifying proper compressor operation. Inspected indoor Goodman furnace and air handler components, checking all electrical connections, drainage systems, and ductwork integrity to ensure optimal system performance for continued reliable operation.

Responded to service call for non-functioning Saniflo Saniaccess 3 macerator pump system in basement bathroom. Upon arrival, confirmed motor was humming but macerator blade and pump were not engaging, resulting in wastewater backup into shower tray. Inspected 5-year-old unit and accessed internal components through cabinet beneath sink. Diagnosed likely mechanical failure or severe internal obstruction preventing impeller rotation. Photographed evidence of wastewater backup on shower floor tiles and documented under-sink plumbing configuration and Saniflo unit location. Advised customer that specialized Saniflo service or unit replacement would be required to resolve issue, as internal repair requires manufacturer-specific expertise and potential parts replacement.

Completed routine preventative cooling maintenance as part of recurring service plan. Performed system inspection and diagnostics, with temperature readings confirming proper airflow and cooling performance at supply duct measuring 50.0°F to 50.8°F, indicating adequate heat transfer and system efficiency within normal operating parameters.

Completed comprehensive cooling system maintenance on eight HVAC units. Performed thorough inspection of evaporator coils, ductwork connections, and refrigerant lines. All systems were cleaned, tested for proper operation, and verified to be functioning within manufacturer specifications.

Completed scheduled cooling system maintenance on residential outdoor condensing unit. Upon inspection, discovered significant wildlife intrusion with bird nesting material accumulated inside electrical compartment around capacitor and contactor assembly, creating potential fire hazard and compromising system safety. Removed all nesting debris from cabinet, cleaned electrical components, and verified proper operation of capacitor and contactor. Inspected condenser coil for blockages, checked refrigerant levels, and tested system performance. Secured cabinet and confirmed unit operating within normal parameters.

Responded to gas leak concern where customer reported corroded gas line. Upon inspection, located deteriorated gas piping in crawl space with visible corrosion on exterior coating and compromised fittings. Performed pressure test to verify system integrity and identify leak source at corroded section of horizontal gas line run beneath structural beams.

Completed comprehensive cooling system tune-up on residential air conditioning unit. Inspected and serviced outdoor condenser unit, noting significant vegetation overgrowth requiring clearance recommendation for optimal airflow and efficiency. Examined electrical components including capacitor, wiring connections, and control circuits; all connections found secure despite visible dust accumulation within cabinet, which was addressed during maintenance procedures.

Completed comprehensive cooling maintenance visit on residential HVAC system. Performed thorough inspection of indoor air handler unit located in basement mechanical room and outdoor condensing unit. Verified proper electrical connections, measured system amperage and voltage readings using digital multimeter to confirm equipment operating within manufacturer specifications. Inspected condenser coil condition and airflow, noting minor debris accumulation on outdoor unit fins. All components found to be functioning properly with no immediate repairs required. System operational and performing as designed upon completion of maintenance protocol.

# HVAC Cooling Maintenance Completed Performed comprehensive seasonal cooling maintenance on residential HVAC system. Conducted thorough inspection of furnace and air handler components with front access panel removed for complete system evaluation. Verified proper operation of gas valve assembly, checked all electrical connections at terminal blocks, and inspected control board wiring integrity. Examined blower motor assembly, capacitor, and associated electrical components for wear and proper function. All wire connections at brass terminals were inspected and found secure with no signs of overheating or degradation. System components photographed and documented showing normal operating condition with no immediate service needs identified.

Responded to callback for AC unit that would not shut off after recent installation. Inspected thermostat settings and verified Honeywell Home ProSeries programmable thermostat was displaying 59°F with system in auto fan mode. Examined control board wiring and connections within equipment housing, confirming all wire terminations were secure and properly landed. Identified thermostat communication issue preventing proper cycle control. Corrected thermostat configuration settings and verified proper system operation with normal on/off cycling restored.

Completed installation of residential HVAC furnace system in basement mechanical room. Installed gray metal tower-style air handler unit against concrete block wall, connected silver flexible ductwork to top of unit with proper metal strapping, and ran electrical conduit along right side of furnace secured with appropriate fasteners. Configured PVC condensate drainage piping and verified all connections for proper operation of the heating and cooling system.

Conducted on-site assessment of mobile home for central air conditioning replacement options. Evaluated existing exterior-mounted HVAC components and indoor air filtration system to determine equipment specifications and installation requirements for new AC system.

Conducted comprehensive assessment of existing 35-year-old HVAC system for complete replacement estimate. Evaluated current furnace and air conditioning equipment in basement utility area, documenting existing installation configuration including ductwork, condensate drainage system, gas connections, and thermostat controls. Photographed equipment specifications, existing PVC drainage piping, flexible ductwork connections, and programmable thermostat to determine appropriate replacement system sizing and compatibility requirements for full system upgrade proposal.

# HVAC Cooling Maintenance Summary Completed routine preventive maintenance on residential cooling system under ongoing service plan agreement. Inspected evaporator coil assembly and honeycomb filter pad, confirming proper airflow and structural integrity of mounting frame. Examined electrical control panel components including capacitor, CoreSense compressor protection module, and associated relay systems, verifying all wire connections were secure and components operating within specifications. # Detailed Work Performed Conducted comprehensive cooling system maintenance inspection beginning with the air handling unit. Examined the evaporative cooling pad assembly, noting the honeycomb-structured filter media remained in serviceable condition with adequate cellular structure intact for proper air distribution. Verified mounting frame integrity and confirmed flexible condensate line was properly secured with appropriate hardware to prevent displacement during operation. Proceeded t

Replaced failed evaporator coil drain pan on air handler unit. Removed old corroded pan showing signs of rust and deterioration, installed new drain pan assembly, and verified proper drainage operation. System tested and confirmed operational with no leaks detected.

Completed cooling system tune-up on window HVAC unit during scheduled afternoon appointment. Performed electrical diagnostics using clamp meter to verify proper amperage draw and system operation, inspected and tested all electrical connections at terminal block for secure contact and proper voltage distribution across multiple circuits. All components found operating within normal parameters with connections cleaned and verified for safe, efficient cooling performance.

Responded to ongoing water leak issue with Goodman central air conditioning unit, model CAPF4961C6DB. Inspected condensate drainage system and interior furnace components, including PVC drain lines, evaporator coil assembly, and condensate pan for blockages or improper pitch. Verified drain line routing and cleared any obstructions to restore proper water discharge from the system.

Completed scheduled cooling system maintenance on residential HVAC unit. Inspected and tested electrical components including dual Edison ECNR 30 amp fuses, which showed minor discoloration and burn marks at connection points but remained within operational parameters. Examined evaporator coil fins and heat exchanger assembly, noting oxidation and age-related discoloration on copper/aluminum fins while confirming adequate airflow through densely packed fin arrangement. All critical components operational and system returned to service.