Heating, AC & Plumbing Services In Pepper Pike

Responded to no cooling call on 1-year-old HVAC unit. Upon arrival, performed diagnostic evaluation to identify cause of system failure. Conducted thorough inspection of thermostat operation, electrical components, and refrigerant circuit. Identified and resolved issue preventing cooling operation. System restored to proper cooling function and verified all equipment operations before departure.

# HVAC Service Call - No Cooling Condition Responded to service call for central air conditioning system with no cooling capability. Upon arrival, customer reported complete loss of cooling function with system age unknown. ## Diagnostic Procedures Performed comprehensive system evaluation of residential split-system air conditioning unit located in interior mechanical closet. Conducted visual inspection of air handler cabinet and associated components. Examined electrical connections at junction box and verified whip connector integrity to unit. Inspected condensate drain lines and refrigerant line connections at base of air handler. Evaluated ductwork connections and flexible duct routing from air handler. Checked system labels and manufacturer specifications on equipment panels. Assessed overall condition of installation including clearances and accessibility in confined mechanical space. ## Findings System inspection revealed air handler unit in mechanical closet with standar

Completed removal of Moen faucet unit from residential plumbing system as requested. All connections were properly disconnected and the unit was safely extracted from the installation without damage to surrounding copper piping or water system components.

Responded to no cooling call on aging HVAC system. Upon arrival, confirmed unit was running but not producing cool air. Opened air handler access panel to inspect internal components, checked electrical connections, blower motor assembly, and wiring. Examined refrigerant lines, condensate drain system with PVC T-junction and copper drain extension, and verified proper drainage function. Documented system condition with photos showing air handler configuration, ductwork connections, and drainage components for service records.

Conducted comprehensive HVAC estimate for replacement of two aging residential systems of similar vintage. Both units are easily accessible, with existing Rheem furnace equipment located in basement utility area. Documented current system conditions through photographic assessment to provide customer with replacement options for dual complete HVAC systems.

# HVAC Cooling Maintenance - Two Systems Completed comprehensive preventive maintenance on two outdoor air conditioning units. Performed thorough inspection of electrical components including contactors, capacitors, and control modules on both systems. Verified proper wire connections and routing, checked for signs of wear or deterioration on all electrical contacts and terminals. Inspected CoreSense diagnostic module functionality on one unit. Assessed overall condition of both units' electrical compartments, noting normal weathering consistent with outdoor exposure. All components found operational and systems returned to service in good working condition.

Responded to no cooling complaint for upstairs air conditioning unit. Upon inspection, found extensive condensation on refrigerant line indicating proper cooling cycle operation. Temperature readings confirmed system was achieving target temperatures of 55°F at evaporator coil. Determined airflow issue preventing conditioned air from reaching living space, likely due to closed damper or blocked ductwork in distribution system.

Completed installation of new Amana air conditioning condenser unit on exterior of residence. Unit was professionally mounted on plastic pad with decorative river rock base, electrical disconnect box installed with proper conduit connections, and system tested with return air temperature verified at 68.5°F.

Completed installation of Unico high-velocity air handler system in attic space. Installed new Amana outdoor condensing unit on pad with proper refrigerant line connections and verified system pressures and temperatures using calibrated testing equipment, confirming optimal operational parameters across all measurements.

Completed installation of new air conditioning system including outdoor condensing unit and indoor evaporator coil integrated with existing furnace. Installed Honeywell Home ProSeries digital thermostat for system control and programming. Verified proper refrigerant charge, tested all electrical connections, confirmed adequate airflow through ductwork, and ensured proper condensate drainage through existing PVC piping system.

Completed comprehensive maintenance service on two residential cooling systems. Performed diagnostic testing on both units including temperature differential measurements at supply plenum and thorough inspection of electrical components. Accessed condensing unit electrical compartment, verified proper operation of dual capacitors and contactor assembly, and confirmed all wire connections secure with no signs of overheating or deterioration.

Responded to service call for recurring condensate drain line leak originating from second floor crawl space affecting two floors below. Inspected condensate drainage system and identified compromised connection points in the drain line assembly. Secured PVC pipe fitting to flexible drainage hose using stainless steel hose clamp to eliminate leak at primary connection point. Verified proper drainage flow from air handler drain pan through clear tubing connected to brass drain valve. Tested system operation to confirm leak was resolved and condensate properly evacuating without further water intrusion to lower levels.

# HVAC Cooling Maintenance Summary Performed comprehensive cooling system maintenance on residential Heil furnace unit located in basement mechanical room. Inspected all accessible components including ductwork connections, electrical panel operations, and refrigerant line connections with valves and copper piping. # Detailed Work Performed Conducted thorough visual inspection of the gray Heil furnace cabinet and associated cooling system components. Verified proper installation and clearances of all galvanized metal ductwork extending from unit, including elbow joints and horizontal runs. Examined insulated ductwork for any signs of deterioration or separation at connection points. Inspected electrical panel and associated wiring connections for proper voltage and amperage readings. Verified all safety switches and controls were functioning within manufacturer specifications. Checked cream-colored auxiliary component box for proper operation and secure mounting. Evaluated copper

Completed preventive maintenance on three residential HVAC cooling systems. Performed comprehensive inspections including filter checks, electrical connections, refrigerant levels, condensate drain lines, and thermostat calibration on all units to ensure optimal performance for the cooling season.

Responded to residential water heater leak. Upon arrival, inspected tanked water heater unit and identified active leak at base with visible water accumulation on concrete floor and corrosion staining around lower fittings. Assessed brass drain valve and bottom connections showing signs of deterioration and moisture intrusion. Drip pan exhibited rust discoloration indicating prolonged exposure to leaking water. Documented condition with photographs showing extent of water damage and compromised seals at tank base. Recommended replacement of unit due to tank integrity failure and advised customer of leak source and necessary corrective action.

Completed preventive maintenance on two HVAC cooling systems. Inspected evaporator coils on both units, noting moderate dust and debris accumulation between aluminum fins. Examined ventilation grilles and return air vents, observing dust buildup on louvers and slats. Both systems were found to be structurally intact and operational. Documented existing conditions through photographic records for maintenance history files.

Completed comprehensive cooling maintenance on two residential HVAC condenser units. Performed full system inspection including electrical components, capacitors, contactors, and refrigerant lines on both units; verified proper operation of all mechanical and electrical systems. All components found in satisfactory working condition with no deficiencies noted.

Completed HVAC system replacement estimate for attic installation with customer-provided ladder access. Documented existing electrical panel configuration with exposed circuit breakers and junction box connections, along with current outdoor unit placement featuring dual air conditioning units on concrete pads with PVC drainage system and refrigerant line routing. Photographed complete system layout including electrical infrastructure and exterior equipment positioning to provide comprehensive replacement specifications.

Completed maintenance visit on two HVAC cooling units as part of MVP service agreement. Performed standard cooling system inspections on both units, including filter checks, visual equipment assessment, and system operational verification. Observed significant copper pipe corrosion with green patina on refrigerant lines requiring monitoring. Air handling unit with pleated filter system inspected in mechanical space with adequate insulation present. Left voicemail to schedule electrical service follow-up for additional work needed beyond routine maintenance scope.

Completed scheduled preventative maintenance service on two residential air conditioning systems. Performed comprehensive inspection of both outdoor condenser units, including visual examination of internal electrical components, capacitor condition and connections, and wiring integrity. Verified proper electrical readings using clamp meter to ensure optimal system performance and confirmed all components were functioning within manufacturer specifications.