HVAC & Air Quality Services in Shaker Heights, OH

Conducted estimate for air conditioning system replacement after unit sustained severe damage from ice accumulation during winter months. Existing Carrier furnace and indoor components were inspected and documented, with outdoor condensing unit requiring complete replacement due to structural damage. Provided customer with equipment options and replacement recommendations for new outdoor AC unit compatible with current indoor system.

Responded to no cooling complaint and performed system evaluation. Assessed outdoor condensing unit location and indoor ductwork system with flexible supply trunk showing moisture accumulation. Provided customer with replacement options for complete HVAC system upgrade.

Completed HVAC system replacement estimate for residential property. Provided multiple repair options to customer with detailed pricing and timeline information, noting that repair turnaround would exceed two weeks. Documented existing system conditions including attic-mounted ductwork, electrical panel configurations, and accessibility considerations for future replacement work.

Replaced aging 10-year-old thermostat with new unit to restore proper HVAC system control and functionality. Inspected outdoor condenser units and indoor components during service call, noting condensation on ductwork consistent with normal system operation. All equipment tested and confirmed operational upon completion.

Completed comprehensive first-year cooling maintenance on residential HVAC system as part of maintenance plan. Performed thorough inspection of indoor air handler unit and associated ductwork in basement installation, verifying proper operation of all mechanical components and drainage systems. Conducted electrical diagnostics at outdoor condensing unit using digital clamp meter to measure amperage draw and verify system performance within manufacturer specifications. All equipment operating properly with no issues identified during routine maintenance visit.

Completed scheduled preventative maintenance on residential cooling system. Upon inspection, condenser unit fins showed significant accumulation of dirt, dust, and debris restricting airflow. Thoroughly cleaned condenser coils and fins to restore optimal heat transfer efficiency and system performance.

Conducted on-site evaluation of existing HVAC system for equipment replacement options. Inspected thermostat control system, documenting internal wiring configuration and terminal connections on the conventional/heat pump compatible circuit board. Assessed outdoor condensing unit located on rear patio, noting current equipment condition and photographed installation site for replacement planning purposes.

Completed final electrical inspection following third review of installation. Documented electrical panel configuration showing properly labeled circuit breakers for all household circuits including upstairs bedrooms, downstairs storage, kitchen appliances, master bathroom, and laundry room. Verified mechanical room installations with insulated ductwork and associated electrical connections. All systems photographed for record and approved for operation.

Responded to service call for air conditioning unit damaged by falling ice. Upon arrival, inspected outdoor condenser unit and documented visible denting to exterior housing and abnormal operational noise during system runtime. Collected diagnostic fee and photographed equipment condition showing impact damage to metal casing and potential fan assembly issues requiring further assessment or replacement of damaged components.

Responded to service call for non-functioning mini split units with suspected electrical issue. Customer reported that turning off breaker for mini splits also deactivated kitchen lights, indicating improper circuit wiring. Performed voltage testing at electrical panel and circuit locations using digital multimeter to verify power distribution and identify cross-wired circuits. Measurements confirmed abnormal voltage readings and circuit configuration issues requiring correction to isolate mini split system from kitchen lighting circuit.

Responded to no cooling call where system would not power on. Upon arrival, inspected electrical components and contactor assembly. Found contactor with multiple wire connections showing signs of age, dust accumulation, and debris throughout the control panel area. Diagnosed electrical issue preventing system operation and collected service fee for diagnostic visit.

Replaced outdoor unit and carefully removed existing Daikin unit for return per manufacturer requirements. Verified system pressures and performed vacuum test using manifold gauges, confirming proper evacuation levels before completing installation.

Responded to no cooling complaint on Ameristar condensing unit model 67M303GA100DAA. Upon arrival, performed electrical diagnostics using digital multimeter to assess system operation and measured voltage and amperage readings at the outdoor unit. Verified unit specifications and conducted troubleshooting procedures to identify the cause of the cooling failure.

Responded to no-cooling call on 2-month-old Amana air conditioning system. Upon arrival, confirmed thermostat was set to cool mode with fan on auto, indoor temperature at 80°F with setpoint at 70°F, but system was not initiating. Inspected outdoor condensing unit and found equipment in good physical condition with proper electrical connections at disconnect box. Diagnosed and resolved thermostat communication issue preventing system call for cooling. Verified proper system startup, confirmed compressor and condenser fan operation, and tested full cooling cycle. System now operating normally and maintaining setpoint temperature.

Returned to complete replacement of six cast iron pipe fittings in the mechanical room plumbing system. Successfully removed deteriorated cast iron elbow and connecting fittings showing significant age and corrosion, then installed new fittings to restore proper function and prevent future leaks. All connections tested and verified secure upon completion.

Completed full system replacement estimate for residential HVAC system. Assessed existing air handler installation showing signs of age with rust staining and discoloration, evaluated ductwork configuration including flexible and rigid galvanized metal ducts with Y-junction connections, and inspected basement mechanical room setup with existing thermostat control. Provided three-tier equipment options ranging from 13.4-16 SEER air conditioning units paired with 80-96% AFUE gas furnaces, all Goodman brand systems designed to replace aging equipment and improve energy efficiency.

Responded to UH error code on Daikin mini split system. Diagnosed and resolved the issue, verified proper operation with temperature readings showing 59.2°F at discharge vents. Inspected outdoor unit and condensate drainage lines to ensure system functionality and proper installation integrity.

Responded to service call for non-functioning Ring video doorbell following previous installation of two units. Performed diagnostic testing and troubleshooting on the affected doorbell, verified proper mounting and wiring connections, and restored unit to full operational status with illuminated indicator ring functioning correctly.

Performed routine cooling system maintenance on HVAC unit. Upon inspection, discovered excessive frost buildup on evaporator coils indicating potential airflow restriction or refrigerant issue. Inspected electrical components including capacitor and contactor, verified proper connections and operation of all wiring and terminals.

Responded to service call for Generac backup generator that failed to activate during neighborhood power outage. Upon arrival, performed visual inspection of unit and control panel, noting accumulation of debris and environmental contamination on exterior surfaces and electrical compartment. Inspected Eaton Cutler-Hammer Power Defense circuit breaker panel (125A rating) and internal generator control interface with maintenance schedule display. Documented current condition of unit showing weathering, dirt buildup, and operational status indicators. Unable to locate illuminated status light as reported by customer, suggesting potential control panel malfunction or power supply issue to monitoring system.