HVAC & Air Quality Services in Shaker Heights, OH

Performed routine maintenance on customer's heating boiler system. Inspected all electrical connections and wiring to ensure proper function, and examined the air handler components including filter and copper piping/valves. System was found to be in operational condition with no issues requiring further attention.

Completed scheduled heating maintenance service on furnace system. Observed water heater with accumulated dust on top and identified deteriorated rubber gasket with visible cracking that requires replacement. System was inspected and serviced according to manufacturer specifications.

Conducted scheduled boiler maintenance service and inspected system components including copper piping and pressure gauge. Customer declined additional plumbing and electrical services that were recommended based on observed system condition.

Performed scheduled heating maintenance on two furnaces. Conducted combustion analysis using Testo 310 analyzer with readings showing proper operation (CO2 10.18%, temperature 74°F). Inspected ductwork and insulated piping for proper installation and condition, noting normal dust accumulation but no significant issues requiring remediation.

Conducted comprehensive inspection of aging boiler system with visible corrosion and rust staining on surrounding wall surfaces. Evaluated Honeywell VAPORSTAT control unit, noting condition of differential and main pressure gauges, wiring connections, and associated piping network. Provided customer with multiple replacement boiler options suitable for the existing configuration.

Performed scheduled boiler maintenance service including inspection of pressure gauge (reading approximately 2-3 PSI) and examination of internal components. Checked all connections, valves, and wiring within the unit, ensuring proper operation of the system. All parameters verified within normal operating range; no issues detected.

Conducted comprehensive inspection of radiator system throughout residence, focusing on aged copper plumbing components and valve assemblies showing signs of oxidation and potential leakage. Identified brass valve with black ribbed hand wheel requiring attention due to visible corrosion at connection points, with particular concern noted at the threaded junctions where white tape/sealant was previously applied.

Replaced aging Whirlpool water heater (originally installed 2-11-19) due to diminished heating performance and brown water discharge. Installed new tanked water heater with proper connections to existing copper supply lines and vent pipe. System now functioning with clear water output and optimal heating capability.

Successfully completed installation of a Goodman 96% efficiency furnace and air conditioning system in basement utility area. Installed proper PVC ventilation system with appropriate connections and secured all electrical components to ceiling joists. System was fully tested and is operating at optimal efficiency.

Conducted inspection of American Standard condenser unit that sustained impact damage from detached gutter. Photos documented exterior condition and manufacturer specifications. Assessment completed to determine repairability for insurance claim purposes.

Conducted site assessment for electrical reconnection after customer reported downed wiring between residence and utility pole. Inspected outdoor electrical meter box mounted on brick exterior wall showing deteriorated sealant at conduit connection point, and documented condition of adjacent HVAC equipment with compromised clearance. Provided comprehensive estimate for rewiring and service restoration.

Successfully replaced approximately 5 feet of 2-inch steam piping and union above the boiler in the mechanical utility area. Pressure testing confirmed proper system operation with gauge reading at 7-8 PSI, within normal operating parameters.

Conducted comprehensive assessment of existing heat pump system and surrounding infrastructure. Inspected exterior electrical connections and junction box mounted on vinyl siding. Evaluated interior plumbing components, noting aging copper pipes with visible oxidation at joints and functional red valve handle. Presented replacement heat pump options to customer based on findings.

Performed scheduled return visit to replace feed tube and solenoid in HVAC system. Completed comprehensive cleaning service including air filter replacement and fan maintenance. System now functioning properly with all components successfully restored to optimal operating condition.

Completed installation of a new electrical line through the garage. Work included mounting and connecting a circuit breaker panel with multiple circuit breakers (15A and 20A), properly terminating all wiring (green, red, white, and black conductors), and ensuring all connections were secure. Verified proper function of all circuits upon completion.

Performed scheduled heating maintenance service on furnace system. Conducted temperature and humidity measurements with readings of 109.4°F and 64% humidity respectively. Inspected gas valve assembly, electrical connections, and heat exchanger components - all found to be in proper working order with no issues detected.

Completed second service call to address HVAC system malfunction. Successfully removed failed blower motor assembly from air handler and installed new replacement motor with proper wiring connections. Additionally replaced control board to restore full system functionality and ensure proper communication between components.

Conducted site inspection for pipe replacement estimate in basement area with extensive water infiltration. Documented significant standing water on concrete floor and observed potential damage to existing pipe infrastructure, including insulated ducts and metal piping with various valves and joints. Noted environmental conditions will require water remediation before proceeding with proposed replacement work.

Conducted assessment of electrical panel requiring rewiring, noting significant wire congestion and suboptimal organization within the main breaker box. Exterior service panel inspection revealed potential weathering concerns at connection points and evaluated the current load capacity to determine appropriate rewiring specifications for improved safety and functionality.

Performed routine heating maintenance on 10+ year old system. Inspected and cleaned blower wheel assembly to ensure proper airflow. Examined igniter assembly and verified connections of electrical wiring to ensure safe and reliable operation.