Solon covers a wide stretch of southeast Cuyahoga County, from SOM Center Road and Aurora Road down toward Cannon Road, Pettibone Road, and the neighborhoods surrounding Solon Community Park and Grantwood Golf Course. With more than 23,000 residents and a large number of homes built between the 1960s and early 2000s, P.K. Wadsworth Heating & Cooling provides service throughout Solon for aging furnaces, electrical upgrades, plumbing repairs, and uneven comfort issues.
Homes near Liberty Road, Bainbridge Road, and the newer developments off US-422 may have systems that have been expanded, updated, or pushed harder than they were originally designed for. If your heating, cooling, plumbing, or electrical system has started causing problems, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service in Solon.
Why Choose P.K. Wadsworth in Solon
P.K. Wadsworth has been serving Northeast Ohio homeowners for decades, and Solon is one of the communities we serve. We service homes near Solon High School, the industrial corridor off Cochran Road, and established neighborhoods where original equipment is now reaching the end of its lifespan.
Renovations to Solon homes can include kitchens, finished basements, home offices, and additions. That can mean HVAC systems, plumbing lines, and electrical panels are carrying more demand today than they were when the home was first built. Our technicians consider the layouts, construction styles, and repair issues in Solon homes.
Heating & Furnace Repair in Solon, OH
A winter heating concern in Solon can start with someone noticing that the furnace never actually shuts off once temperatures drop. In neighborhoods near Hawthorne Valley Country Club, Liberty Hills, and the older subdivisions surrounding SOM Center Road, a system may be heating additions, remodeled lower levels, and larger family rooms that were added years after the original furnace was installed.
Some homes may still have equipment dating to the 1970s, 80s, and 90s. Others have newer furnaces connected to older duct systems that were never redesigned to handle modern airflow demands. That combination can leave upstairs bedrooms colder than the rest of the house while the furnace runs longer than it should.
P.K. Wadsworth provides heating solutions throughout Solon, including:
Air Conditioning & Cooling Services in Solon, OH
Cooling problems in Solon may not affect the entire house equally. Homes near Miles Road, Richmond Road, and the neighborhoods surrounding Solon Community Park may have upstairs rooms becoming uncomfortable by mid-afternoon even though the thermostat downstairs says the house is cooling normally.
The issue can involve airflow distribution, insulation differences between levels, or older systems trying to cool square footage that has expanded over time. Larger two-story homes and properties with vaulted ceilings near US-422 can expose those problems once Northeast Ohio humidity settles in during July and August.
Cooling services available throughout Solon include:
Plumbing & Water Heater Services in Solon, OH
Plumbing issues in Solon can begin as smaller problems people try to work around for a while. Maybe the water heater takes longer to recover in the morning, a basement drain starts backing up during storms, or a sump pump suddenly sounds louder than normal after heavy rain.
Homes near Pettibone Road, Cannon Road, and areas closer to the Chagrin River watershed may depend on sump pump systems to help protect lower levels. Once groundwater starts building up during extended rain, weak sump systems become noticeable very quickly.
P.K. Wadsworth provides plumbing services throughout Solon, including:
Electrical Repair & Upgrades in Solon, OH
Electrical systems in Solon may be handling more demand today than they were originally designed for. Homes near Signature of Solon Country Club, Cannon Road, and newer developments off Aurora Road may support EV chargers, backup generators, larger kitchen appliances, home office equipment, and finished entertainment spaces at the same time.
In older sections of Solon, a panel that was adequate decades ago may now be operating near capacity because the home has gradually expanded around it. Flickering lights, overloaded breakers, and inconsistent power can start appearing after another renovation or appliance upgrade gets added to the system.
Electrical services we provide throughout Solon include:
Indoor Air Quality Solutions for Solon Homes
In some Solon homes, the house never quite feels comfortable even when the temperature setting looks correct. The air feels dry during winter, heavy during humid stretches, or dusty in certain rooms no matter how often filters get changed.
That can happen in larger homes near Liberty Road and newer construction surrounding US-422 where tighter construction keeps conditioned air inside but can also limit ventilation.
P.K. Wadsworth installs and services:
P.K. Wadsworth Service for Solon Homeowners
P.K. Wadsworth provides service in Solon, with a focus on arriving prepared, explaining problems clearly, and respecting the home while we work. Call to discuss your service needs and current appointment availability.
Our service approach includes:
- Experienced HVAC, plumbing, and electrical technicians
- Scheduling based on current availability
- Clear repair recommendations without pressure
- Financing options on qualifying systems
- Respectful service and clean job sites
- Ongoing maintenance plans for long-term system care
From older homes near downtown Solon to newer developments expanding farther south toward Aurora, homeowners may want honest answers about whether something can still be repaired or whether replacement actually makes sense. Our technicians can help you weigh those options.
Schedule Service in Solon
Whether you are dealing with an aging furnace, a failing water heater, electrical upgrades, or cooling problems that keep coming back every summer, P.K. Wadsworth is ready to help. Our technicians provide service throughout Solon, taking the home’s layout and existing systems into account.
Call (440) 588-3025 or contact P.K. Wadsworth online today to schedule heating, cooling, plumbing, or electrical service in Solon, OH 44139.
Recent Jobs and Reviews in Solon, OH
Solon, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in Solon, OH in July 2026.
The most recent job was on July 20, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 1,046 jobs in Solon, OH in the last 12 months.
Job Locations and Reviews
Completed cooling tune-up on residential HVAC system. Performed electrical diagnostics using digital multimeter to verify proper voltage and amperage readings at the capacitor and associated wiring connections. All measurements confirmed system operating within manufacturer specifications, and unit tested successfully under normal cooling operation.
Responded to no cooling complaint on residential air conditioning system. Upon inspection, diagnosed failed dual-run capacitor preventing compressor and condenser fan motor from operating properly. Replaced defective 45/5 MFD 440VAC capacitor with new unit, restoring system to proper cooling operation.
Replaced defective wiring harness on HVAC control system due to damaged wire connections affecting unit operation. Disconnected old harness from control board, installed new harness with proper wire routing and secure connections to all terminals, and verified system functionality upon completion.
Replaced failed compressor on residential air conditioning system. Evacuated system to proper vacuum levels (497 microns verified), recharged with R-410A refrigerant to manufacturer specifications, and confirmed proper operation of all components.
Performed comprehensive AC tune-up on cooling system of unknown age, confirming unit is operating within normal parameters. Measured supply air temperature at 55.4°F at duct register, indicating proper cooling output and refrigerant charge. Replaced dirty air filter with new pleated filter to restore optimal airflow and system efficiency. Verified best contact number for future maintenance scheduling, with next recommended service due in 2026.
Completed comprehensive cooling system tune-up on outdoor condensing unit. Performed electrical diagnostics using digital multimeter, recording voltage readings of 254.8V and verifying proper amperage draw of 52.7A on compressor circuit. Inspected condenser coil condition, checked refrigerant pressures, and verified all electrical connections were secure and within manufacturer specifications. Unit operating efficiently with all parameters within normal range.
Installed hard start kit on HVAC unit to improve compressor performance and reduce startup strain. Accessed electrical compartment, connected diagnostic equipment to verify compressor operation, and properly wired the hard start capacitor into the system. Unit tested and confirmed operational with improved startup characteristics.
Responded to no-cooling call on one-year-old Daikin outdoor unit. Found red fault indicator illuminated at exterior disconnect box indicating blown fuse. Diagnosed failed fuse preventing power to condensing unit. Replaced defective fuses in outdoor disconnect, verified proper amperage rating per manufacturer specifications, restored power to system, and confirmed unit operation with normal cooling restored.
Responded to no cooling complaint on residential air conditioning system. Upon arrival, inspected outdoor condensing unit and found electrical components accessible for diagnostic testing. Examined capacitor, contactor, and associated wiring connections for proper operation and signs of failure. Proceeded to indoor air handler unit to measure temperature differentials across evaporator coil using digital thermometer to verify system performance. Identified issue, performed necessary repairs to restore cooling operation, and confirmed system returned to normal function with adequate airflow and temperature split.
Completed routine HVAC cooling maintenance on residential system, performing standard inspection of furnace unit and associated components. Verified proper operation of condensate drain system with U-trap configuration, checked refrigerant lines and connections, and confirmed all safety labels and equipment specifications were clearly visible and intact.
Completed routine cooling maintenance on HVAC system, including inspection and cleaning of air filter assembly and verification of capacitor connections and electrical components. All components were found in good working condition with secure wiring connections, and the system is operating within normal parameters.
Conducted comprehensive electrical estimate for residential standby generator installation. Assessed exterior mounting location adjacent to existing HVAC equipment and evaluated utility room infrastructure including electrical panel access, water heater clearances, and available space for transfer switch installation. Documented site conditions, existing utility connections, and structural considerations necessary for generator pad placement, fuel line routing, and electrical integration with main service panel.
Conducted comprehensive on-site evaluation for electrical panel replacement in residential basement utility area. Assessed existing electrical service configuration, documented current panel condition, and identified necessary upgrades to meet current electrical code requirements. Evaluated available working space around existing panel location, confirmed adequate clearance for new panel installation, and verified compatibility with existing service entrance conductors. Photographed utility room layout to document proximity of water heater, pressure tank, and plumbing infrastructure for coordination during panel replacement work. Determined scope of work including new circuit breaker panel, grounding requirements, and any necessary service entrance modifications to ensure safe and compliant electrical system upgrade.
# HVAC Cooling Maintenance Completed Performed comprehensive cooling system maintenance on residential air conditioning unit as part of recurring preventive maintenance program. Conducted thorough inspection of outdoor condenser unit, including electrical components, capacitor, contactor assembly, and associated wiring connections. Verified proper operation of disconnect fuses and electrical service components at ground level. All electrical connections were inspected for secure mounting and proper function. System components showed normal wear consistent with regular operation. Unit was found to be operating within manufacturer specifications upon completion of maintenance procedures.
Completed preventive maintenance on residential cooling system. Performed comprehensive system inspection including temperature diagnostics at supply duct, recording 41.98°F discharge air temperature indicating proper cooling performance. Tested capacitor functionality using digital multimeter to verify electrical integrity and proper microfarad readings. Inspected refrigerant lines, ductwork, and all accessible components. System operating within normal parameters with no deficiencies noted.
Completed heating maintenance tune-up on residential furnace system. Identified condensate drain line with active water leakage due to inadequate sealing; sealed white PVC condensate pipe to eliminate moisture discharge. Performed comprehensive system diagnostics using digital multimeter to verify electrical components, tested voltage readings, and confirmed proper amperage draw at outdoor disconnect panel. All heating components operating within manufacturer specifications following repairs.
Responded to emergency no-cooling call for 6-year-old air conditioning system with 6°F temperature differential between thermostat setpoint (73°F) and actual indoor temperature (79°F). Performed diagnostic temperature measurements at multiple points including supply air temperature at ductwork (58.5°F) and thermostat location (73°F) to assess system performance and airflow distribution. Documented equipment conditions and temperature readings throughout the system to identify cooling capacity issues affecting comfort during critical time period.
Responded to no cooling complaint and performed system inspection. Accessed attic-mounted HVAC equipment and inspected ductwork installation, insulation coverage, and air distribution components. Verified proper duct connections and documented existing system configuration with flexible ductwork running through insulated attic space.
# HVAC Cooling Maintenance - Two Systems Performed comprehensive preventive maintenance on two air conditioning systems as part of recurring service agreement. Conducted electrical diagnostics on outdoor condensing unit using Fieldpiece SC620 clamp meter, measuring amp draw and verifying proper electrical function. Inspected and tested dual run capacitor, confirming proper microfarad ratings and electrical connections with red, yellow, green, and white wire terminations secure and within specifications. Evaluated refrigerant line insulation integrity on copper linesets, noting foam insulation properly secured with cable ties. Measured system performance parameters using calibrated digital instruments to verify operational efficiency and proper refrigerant charge. Documented equipment condition with photographic records showing standard outdoor wear consistent with normal operation. All electrical components, including capacitor and wiring connections within electrical compartment, fo
Performed comprehensive cooling season tune-up on residential air conditioning system. Inspected outdoor condenser unit, verified proper electrical connections and capacitor operation, and evaluated indoor evaporator coil condition through supply register. All components found operating within normal parameters with no immediate service needs identified.
