Solon covers a wide stretch of southeast Cuyahoga County, from SOM Center Road and Aurora Road down toward Cannon Road, Pettibone Road, and the neighborhoods surrounding Solon Community Park and Grantwood Golf Course. With more than 23,000 residents and a large number of homes built between the 1960s and early 2000s, P.K. Wadsworth Heating & Cooling provides service throughout Solon for aging furnaces, electrical upgrades, plumbing repairs, and uneven comfort issues.
Homes near Liberty Road, Bainbridge Road, and the newer developments off US-422 may have systems that have been expanded, updated, or pushed harder than they were originally designed for. If your heating, cooling, plumbing, or electrical system has started causing problems, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service in Solon.
Why Choose P.K. Wadsworth in Solon
P.K. Wadsworth has been serving Northeast Ohio homeowners for decades, and Solon is one of the communities we serve. We service homes near Solon High School, the industrial corridor off Cochran Road, and established neighborhoods where original equipment is now reaching the end of its lifespan.
Renovations to Solon homes can include kitchens, finished basements, home offices, and additions. That can mean HVAC systems, plumbing lines, and electrical panels are carrying more demand today than they were when the home was first built. Our technicians consider the layouts, construction styles, and repair issues in Solon homes.
Heating & Furnace Repair in Solon, OH
A winter heating concern in Solon can start with someone noticing that the furnace never actually shuts off once temperatures drop. In neighborhoods near Hawthorne Valley Country Club, Liberty Hills, and the older subdivisions surrounding SOM Center Road, a system may be heating additions, remodeled lower levels, and larger family rooms that were added years after the original furnace was installed.
Some homes may still have equipment dating to the 1970s, 80s, and 90s. Others have newer furnaces connected to older duct systems that were never redesigned to handle modern airflow demands. That combination can leave upstairs bedrooms colder than the rest of the house while the furnace runs longer than it should.
P.K. Wadsworth provides heating solutions throughout Solon, including:
Air Conditioning & Cooling Services in Solon, OH
Cooling problems in Solon may not affect the entire house equally. Homes near Miles Road, Richmond Road, and the neighborhoods surrounding Solon Community Park may have upstairs rooms becoming uncomfortable by mid-afternoon even though the thermostat downstairs says the house is cooling normally.
The issue can involve airflow distribution, insulation differences between levels, or older systems trying to cool square footage that has expanded over time. Larger two-story homes and properties with vaulted ceilings near US-422 can expose those problems once Northeast Ohio humidity settles in during July and August.
Cooling services available throughout Solon include:
Plumbing & Water Heater Services in Solon, OH
Plumbing issues in Solon can begin as smaller problems people try to work around for a while. Maybe the water heater takes longer to recover in the morning, a basement drain starts backing up during storms, or a sump pump suddenly sounds louder than normal after heavy rain.
Homes near Pettibone Road, Cannon Road, and areas closer to the Chagrin River watershed may depend on sump pump systems to help protect lower levels. Once groundwater starts building up during extended rain, weak sump systems become noticeable very quickly.
P.K. Wadsworth provides plumbing services throughout Solon, including:
Electrical Repair & Upgrades in Solon, OH
Electrical systems in Solon may be handling more demand today than they were originally designed for. Homes near Signature of Solon Country Club, Cannon Road, and newer developments off Aurora Road may support EV chargers, backup generators, larger kitchen appliances, home office equipment, and finished entertainment spaces at the same time.
In older sections of Solon, a panel that was adequate decades ago may now be operating near capacity because the home has gradually expanded around it. Flickering lights, overloaded breakers, and inconsistent power can start appearing after another renovation or appliance upgrade gets added to the system.
Electrical services we provide throughout Solon include:
Indoor Air Quality Solutions for Solon Homes
In some Solon homes, the house never quite feels comfortable even when the temperature setting looks correct. The air feels dry during winter, heavy during humid stretches, or dusty in certain rooms no matter how often filters get changed.
That can happen in larger homes near Liberty Road and newer construction surrounding US-422 where tighter construction keeps conditioned air inside but can also limit ventilation.
P.K. Wadsworth installs and services:
P.K. Wadsworth Service for Solon Homeowners
P.K. Wadsworth provides service in Solon, with a focus on arriving prepared, explaining problems clearly, and respecting the home while we work. Call to discuss your service needs and current appointment availability.
Our service approach includes:
- Experienced HVAC, plumbing, and electrical technicians
- Scheduling based on current availability
- Clear repair recommendations without pressure
- Financing options on qualifying systems
- Respectful service and clean job sites
- Ongoing maintenance plans for long-term system care
From older homes near downtown Solon to newer developments expanding farther south toward Aurora, homeowners may want honest answers about whether something can still be repaired or whether replacement actually makes sense. Our technicians can help you weigh those options.
Schedule Service in Solon
Whether you are dealing with an aging furnace, a failing water heater, electrical upgrades, or cooling problems that keep coming back every summer, P.K. Wadsworth is ready to help. Our technicians provide service throughout Solon, taking the home’s layout and existing systems into account.
Call (440) 588-3025 or contact P.K. Wadsworth online today to schedule heating, cooling, plumbing, or electrical service in Solon, OH 44139.
Recent Jobs and Reviews in Solon, OH
Solon, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in Solon, OH in June 2026.
The most recent job was on June 13, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 1,046 jobs in Solon, OH in the last 12 months.
Job Locations and Reviews
Responded to no cooling call and performed system evaluation. Upon inspection, found outdoor HVAC unit located in debris-filled equipment alcove with significant leaf accumulation affecting airflow and system performance. Assessed existing equipment condition, indoor Honeywell digital thermostat functionality, and overall system operation. Provided customer with replacement options and estimates for new HVAC system installation to resolve cooling issue and restore comfort.
Provided HVAC system replacement estimate and options to customer requesting immediate installation. Documented existing Carrier thermostat showing current temperature reading of 82 degrees and photographed electrical panel with circuit directory identifying HVAC and furnace circuits for installation planning. Scheduled installation appointment for Monday afternoon pending customer acceptance of estimate.
Completed scheduled cooling maintenance on two HVAC systems. Performed comprehensive inspection of both units, including electrical testing with multimeter to verify proper voltage and amperage readings. Measured and documented temperature differentials across evaporator coils, confirming adequate cooling performance with readings in acceptable range. Inspected outdoor condenser units, noting advanced corrosion on metal panels requiring monitoring for potential future replacement. Verified proper refrigerant levels, checked electrical connections, and ensured both systems operating within manufacturer specifications. All components functioning correctly at time of service completion.
Responded to A/C service call for cooling system not maintaining set temperature. Thermostat was set to 70°F but indoor temperature reading was 74°F, indicating a 4-degree differential. Inspected attic ductwork installation and verified proper insulation wrapping on supply ducts. System evaluated and necessary adjustments made to restore proper cooling performance.
Responded to no-cooling complaint on residential air conditioning system. Upon arrival, confirmed system was running but not producing cold air. Performed diagnostic evaluation of outdoor condensing unit and electrical components. Measured incoming line voltage at disconnect box, which registered 172 volts—significantly below the required 208-240V range for proper compressor operation. Inspected disconnect panel and found aged fuses with visible corrosion on electrical connections and wiring terminals. Low voltage condition identified as primary cause of cooling failure, preventing compressor from operating at design specifications. Documented electrical readings and component condition with photos for customer records. Advised homeowner that utility company should be contacted to address inadequate voltage supply to the unit, as this falls outside HVAC system repair scope and represents an electrical service issue requiring utility provider intervention.
Completed comprehensive electrical inspection of residential service panel and exterior HVAC electrical components. Interior panel inspection revealed properly organized circuit breaker configuration with appropriate wire management, yellow wire connectors at service entry point, and all breakers securely mounted in dual rows. Exterior inspection documented HVAC disconnect and associated refrigerant line insulation with electrical conduit connections to outdoor unit, confirming proper installation and weatherproofing of exterior electrical components.
Completed scheduled HVAC cooling system maintenance including inspection of exterior electrical connections and conduit at the outdoor unit, as well as interior air handler components. Verified air filter condition and checked system accessibility, with all components found to be in proper working order.
Conducted mid-morning electrical inspection of residential service panel and utility systems. Documented existing electrical panel configuration showing dual-column breaker arrangement with approximately 20-24 circuit breakers, verified proper wire management and connections to bus bars, and confirmed organized installation of branch circuits. Also photographed adjacent plumbing assembly with water meter/pressure regulator and shutoff valve for reference during inspection.
Completed routine HVAC cooling system maintenance and hot water tank inspection. Performed temperature diagnostics in attic space measuring supply air at 48.9°F, confirming proper cooling system operation. Conducted electrical testing with digital multimeter, though complete electrical readings were not available at time of service. Inspected ductwork and insulation conditions in attic area, verifying proper installation and system integrity.
Responded to service call for tanked water heater producing lukewarm water. Performed diagnostic inspection of residential water heater unit located in basement mechanical room. Assessed unit specifications, examined inlet and outlet connections, and verified proper venting configuration through metallic exhaust pipe. Inspected surrounding plumbing infrastructure including copper supply lines and associated HVAC systems in utility area. Documented equipment condition and installation setup with photographic records showing water heater placement, wall-mounted utilities, and basement infrastructure. Provided assessment findings and recommendations to household representatives present during service visit.
Responded to no cooling complaint for residential air conditioning system. Upon arrival, inspected outdoor unit and discovered severely corroded copper refrigerant line penetrating through foundation wall. Line showed extensive oxidation with green patina and orange-brown deterioration, indicating prolonged exposure to moisture and potential refrigerant leak. Documented condition of corroded piping and valve connections showing weathering and mineral deposits. System unable to maintain proper cooling due to compromised refrigerant lines requiring replacement and proper sealing at foundation penetration point.
Responded to service call for air conditioning system not cooling properly. Upon arrival, confirmed condenser fan motor was operational but system failed to achieve adequate temperature reduction. Performed comprehensive diagnostic evaluation of 10-year-old cooling system. Inspected refrigerant levels, compressor operation, and electrical components. Identified issue preventing proper cooling cycle. Completed necessary repairs to restore full system functionality and verified proper temperature differential across evaporator coil. System now operating within manufacturer specifications and providing adequate cooling throughout the home.
Completed scheduled preventive maintenance on residential Goodman air conditioning system. Performed comprehensive inspection of outdoor condenser unit, noting normal weathering and minor dust accumulation on exterior grille and cabinet surfaces. Verified condenser unit mounted securely on concrete pad with all fasteners intact. Inspected indoor air handler blower assembly, observing typical dust buildup on squirrel cage fan blades and motor components. Documented equipment condition through photographic records. System operational and functioning as designed.
Responded to no cooling complaint at basement HVAC installation. Upon inspection, found aging air handler system with significant water damage and staining on lower cabinet panels, indicating possible condensate drainage issues or previous leakage. Evaluated existing equipment condition, noting deteriorated exterior surfaces and accumulated debris around unit base. Provided customer with replacement options for complete air conditioning and air handler system upgrade to restore cooling functionality and address underlying moisture-related concerns affecting equipment integrity.
Completed comprehensive estimate for full HVAC system replacement in 4600 square foot residential property with two original systems from 2007. Both systems experiencing complete cooling failure with depleted refrigerant levels and failing furnaces. Assessed second floor 3-ton system as appropriately sized and basement 4-ton system with recommendation for upgrade to 5-ton capacity. Provided estimate specifications for high-efficiency 97%+ AFUE furnaces with PVC venting to replace existing equipment, including evaluation of existing humidifier integration and ductwork compatibility for both zones.
Conducted comprehensive electrical inspection of residential property during renovation phase. Documented electrical panel installation featuring dual-column circuit breaker configuration with main service lugs and proper wire routing through metal enclosure. Inspected exposed ceiling infrastructure including metallic conduit runs and mounting systems in construction area with visible structural elements. Captured photographic documentation of all electrical components and installations for compliance records.
Completed comprehensive cooling maintenance on two HVAC systems, including full inspection of indoor air handler components and outdoor condensing unit. Verified proper operation of electrical components including capacitor, contactor, and control board connections. Inspected refrigerant lines, ductwork insulation, and all mechanical connections for proper installation and wear. All systems tested and operating within normal parameters.
Completed scheduled preventive maintenance on multiple cooling systems as part of ongoing recurring service agreement. Performed comprehensive inspections of outdoor condensing units and indoor air handler components, including examination of blower motor assemblies, electrical connections, and exterior condenser grilles. Documented equipment condition through photographic records showing normal operational wear and environmental debris accumulation on outdoor unit louvers, with all internal blower motor components and wiring connections found to be in proper working order.
Responded to no cooling complaint on residential split system. Upon arrival, performed system diagnostic and visual inspection of furnace/air handler and connected AC components in basement mechanical room. Equipment showed signs of age with visible dirt accumulation and staining on lower panels. Assessed ductwork connections, refrigerant lines, and electrical components. System evaluated for proper operation and airflow issues identified during troubleshooting process.
Completed routine cooling system maintenance on residential split-system air conditioner. Performed exterior condenser unit cleaning, removing debris from coil fins and verifying proper airflow through the unit. Inspected evaporator coil assembly and condensate drain lines for proper operation, noting typical dust accumulation on indoor coil fins. Verified refrigerant line connections, checked system components for wear, and confirmed all electrical connections were secure. System operational and ready for continued service.
