Solon covers a wide stretch of southeast Cuyahoga County, from SOM Center Road and Aurora Road down toward Cannon Road, Pettibone Road, and the neighborhoods surrounding Solon Community Park and Grantwood Golf Course. With more than 23,000 residents and a large number of homes built between the 1960s and early 2000s, P.K. Wadsworth Heating & Cooling provides service throughout Solon for aging furnaces, electrical upgrades, plumbing repairs, and uneven comfort issues.
Homes near Liberty Road, Bainbridge Road, and the newer developments off US-422 may have systems that have been expanded, updated, or pushed harder than they were originally designed for. If your heating, cooling, plumbing, or electrical system has started causing problems, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service in Solon.
Why Choose P.K. Wadsworth in Solon
P.K. Wadsworth has been serving Northeast Ohio homeowners for decades, and Solon is one of the communities we serve. We service homes near Solon High School, the industrial corridor off Cochran Road, and established neighborhoods where original equipment is now reaching the end of its lifespan.
Renovations to Solon homes can include kitchens, finished basements, home offices, and additions. That can mean HVAC systems, plumbing lines, and electrical panels are carrying more demand today than they were when the home was first built. Our technicians consider the layouts, construction styles, and repair issues in Solon homes.
Heating & Furnace Repair in Solon, OH
A winter heating concern in Solon can start with someone noticing that the furnace never actually shuts off once temperatures drop. In neighborhoods near Hawthorne Valley Country Club, Liberty Hills, and the older subdivisions surrounding SOM Center Road, a system may be heating additions, remodeled lower levels, and larger family rooms that were added years after the original furnace was installed.
Some homes may still have equipment dating to the 1970s, 80s, and 90s. Others have newer furnaces connected to older duct systems that were never redesigned to handle modern airflow demands. That combination can leave upstairs bedrooms colder than the rest of the house while the furnace runs longer than it should.
P.K. Wadsworth provides heating solutions throughout Solon, including:
Air Conditioning & Cooling Services in Solon, OH
Cooling problems in Solon may not affect the entire house equally. Homes near Miles Road, Richmond Road, and the neighborhoods surrounding Solon Community Park may have upstairs rooms becoming uncomfortable by mid-afternoon even though the thermostat downstairs says the house is cooling normally.
The issue can involve airflow distribution, insulation differences between levels, or older systems trying to cool square footage that has expanded over time. Larger two-story homes and properties with vaulted ceilings near US-422 can expose those problems once Northeast Ohio humidity settles in during July and August.
Cooling services available throughout Solon include:
Plumbing & Water Heater Services in Solon, OH
Plumbing issues in Solon can begin as smaller problems people try to work around for a while. Maybe the water heater takes longer to recover in the morning, a basement drain starts backing up during storms, or a sump pump suddenly sounds louder than normal after heavy rain.
Homes near Pettibone Road, Cannon Road, and areas closer to the Chagrin River watershed may depend on sump pump systems to help protect lower levels. Once groundwater starts building up during extended rain, weak sump systems become noticeable very quickly.
P.K. Wadsworth provides plumbing services throughout Solon, including:
Electrical Repair & Upgrades in Solon, OH
Electrical systems in Solon may be handling more demand today than they were originally designed for. Homes near Signature of Solon Country Club, Cannon Road, and newer developments off Aurora Road may support EV chargers, backup generators, larger kitchen appliances, home office equipment, and finished entertainment spaces at the same time.
In older sections of Solon, a panel that was adequate decades ago may now be operating near capacity because the home has gradually expanded around it. Flickering lights, overloaded breakers, and inconsistent power can start appearing after another renovation or appliance upgrade gets added to the system.
Electrical services we provide throughout Solon include:
Indoor Air Quality Solutions for Solon Homes
In some Solon homes, the house never quite feels comfortable even when the temperature setting looks correct. The air feels dry during winter, heavy during humid stretches, or dusty in certain rooms no matter how often filters get changed.
That can happen in larger homes near Liberty Road and newer construction surrounding US-422 where tighter construction keeps conditioned air inside but can also limit ventilation.
P.K. Wadsworth installs and services:
P.K. Wadsworth Service for Solon Homeowners
P.K. Wadsworth provides service in Solon, with a focus on arriving prepared, explaining problems clearly, and respecting the home while we work. Call to discuss your service needs and current appointment availability.
Our service approach includes:
- Experienced HVAC, plumbing, and electrical technicians
- Scheduling based on current availability
- Clear repair recommendations without pressure
- Financing options on qualifying systems
- Respectful service and clean job sites
- Ongoing maintenance plans for long-term system care
From older homes near downtown Solon to newer developments expanding farther south toward Aurora, homeowners may want honest answers about whether something can still be repaired or whether replacement actually makes sense. Our technicians can help you weigh those options.
Schedule Service in Solon
Whether you are dealing with an aging furnace, a failing water heater, electrical upgrades, or cooling problems that keep coming back every summer, P.K. Wadsworth is ready to help. Our technicians provide service throughout Solon, taking the home’s layout and existing systems into account.
Call (440) 588-3025 or contact P.K. Wadsworth online today to schedule heating, cooling, plumbing, or electrical service in Solon, OH 44139.
Recent Jobs and Reviews in Solon, OH
Solon, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in Solon, OH in May 2026.
The most recent job was on May 9, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 1,046 jobs in Solon, OH in the last 12 months.
Job Locations and Reviews
Completed comprehensive first-year preventive maintenance on residential hydronic boiler system. Performed thorough inspection of all major components including boiler control board displaying normal operational status code, expansion tank, circulator pumps, and associated piping network. Verified proper operation of all safety controls, checked system pressures, inspected copper and black iron piping for leaks or corrosion, confirmed ball valve functionality throughout the heating loop, and documented system condition with photographic records. All components found operating within manufacturer specifications with no deficiencies noted.
Completed comprehensive cooling system maintenance on 5/8-ton unit, including inspection of ventilation components and airflow verification. Performed concurrent hot water heater maintenance, noting copper pipe corrosion at tank connection point and documenting existing condition of unit with accumulated dust on tank surface.
Completed full HVAC system installation including Lennox 80% efficiency furnace, air conditioning unit, chimney liner, and humidifier in basement mechanical room. All equipment professionally mounted, connected to new metallic ductwork with proper transitions and plenums, and tested for optimal performance. System commissioned and operational with all components functioning to manufacturer specifications.
# HVAC Cooling System Maintenance Completed scheduled preventive maintenance on residential cooling system as part of ongoing service plan. Performed comprehensive inspection of air handler unit and associated components in basement mechanical room. Accessed and inspected electronic control board assembly, verifying proper operation of all control functions including LEARN, TEST, and RECALL switches. Examined PCB for signs of component degradation, loose connections, or heat damage. All electronic components including capacitors, integrated circuits, resistors, and LED display were found in normal working condition with no visible defects. Verified integrity of wiring connections at terminal blocks with red, pink, white, green, and yellow conductors properly secured. Inspected air handler cabinet for dust accumulation and overall condition. Evaluated horizontal supply ductwork and elbow connections for proper sealing. Examined humidifier unit mounted to ductwork, confirming secure
Separated a standard electrical outlet from GFCI protection and installed a new independent receptacle. Installed outlet above countertop in kitchen area with proper wall plate, and added a second outlet in adjacent room with blue-gray textured wall covering near baseboard trim. Both receptacles were properly wired, tested for correct polarity and grounding, and verified to be functioning safely per NEC standards.
Completed routine cooling maintenance on HVAC system. Inspected and documented air filter condition, showing normal dust accumulation on pleated media within housing. Performed electrical diagnostics on outdoor unit using digital multimeter, recording voltage readings of 522V and 172V at disconnect panel to verify proper power supply and system operation.
Completed comprehensive HVAC tune-up on residential furnace system. Performed standard maintenance procedures including system inspection, filter evaluation, and temperature diagnostics. Supply air temperature measured at 52.1°F with humidity reading of 39.4%, indicating proper system operation during cooling mode assessment.
Conducted site assessment of existing water heating system in unfinished basement utility area. Documented current tank-style water heater installation, including all supply lines, venting configuration, and available space for potential equipment upgrade. Photographed existing plumbing connections, gas lines, and surrounding mechanical systems to provide accurate quote for replacement options including traditional tank water heater and tankless water heater alternatives.
Completed full HVAC system replacement due to cracked heat exchanger in existing furnace. Installed new American Standard furnace with proper PVC venting and condensate drainage, along with Space-Gard air cleaner system. Presented multiple system options to address failed equipment and ensure safe, efficient heating operation.
Completed comprehensive maintenance and tune-up service on two HVAC systems, both over 10 years old, located at the same property. Performed full system inspection on American Standard unit (Model 4A7A3036G1000NIB, Serial 16154LLRAF) and secondary system including basement-mounted furnace with integrated Aprilaire humidifier. Conducted coil cleaning on both air conditioning units, removing accumulated dirt and debris from evaporator and condenser coils to restore optimal heat transfer efficiency. Inspected all electrical connections, tested capacitors, and verified proper amperage draw on compressor and fan motors. Checked refrigerant levels and system pressures on both units. Cleaned condensate drain lines and verified proper drainage. Inspected ductwork connections and sealed where necessary. Tested thermostat operation and system cycling. Replaced air filters and cleaned blower assemblies. All systems operational and running within manufacturer specifications upon completion.
Completed installation of new Amana HVAC furnace system in residential utility room. Unit was properly positioned, secured, and connected with all necessary ductwork, including silver metallic supply ducting and proper venting configurations. Installed white PVC condensate drainage piping with appropriate fittings and elbows to ensure proper system drainage. All electrical connections were completed to manufacturer specifications, and safety labels were affixed to equipment per code requirements. System was tested and verified operational upon completion.
Completed comprehensive evaluation of existing residential HVAC system for full replacement estimate. Assessed outdoor condensing unit positioned on concrete pad adjacent to structure, noting current equipment configuration and installation parameters. Inspected indoor air handler components including existing PVC condensate drainage system and ventilation piping. Documented current system layout, equipment specifications, and spatial constraints to provide accurate replacement options for complete heating and cooling system upgrade.
Completed full HVAC system installation including 96% efficiency furnace, air conditioning unit, and humidifier. Replaced blown 25A Littelfuse FLNR Class RK5 fuses during startup and commissioning. System tested and verified operational with all components functioning properly, thermostat programmed and displaying correctly.
Completed scheduled preventive maintenance on residential split-system air conditioning unit. Performed comprehensive inspection of outdoor condenser unit including coil cleaning, electrical connection verification, and refrigerant level assessment. Inspected indoor blower motor assembly, verified proper operation of all electrical connections, and confirmed airflow performance. All components found operating within manufacturer specifications with no deficiencies noted.
Completed comprehensive HVAC system replacement estimate for residential property, presenting full system options including furnace units with 70% AFUE efficiency ratings and air conditioning systems with 90% SEER ratings. Applied diagnostic fee credit toward replacement equipment purchase, documented existing electrical panel configuration and basement installation area conditions through photographic documentation to support equipment specifications and installation planning.
Conducted comprehensive evaluation of existing 22-year-old residential HVAC system for full replacement estimate. Assessed current equipment condition, ductwork infrastructure including exposed copper refrigerant lines with brass fittings, and overall system layout in basement installation. Documented existing mechanical components, ventilation equipment, and infrastructure to provide accurate specifications for complete system replacement proposal. Photographed equipment access points, refrigerant line configuration, and installation environment to determine proper sizing and equipment requirements for new system installation.
Completed full HVAC system installation including 96% efficiency furnace, air conditioning unit, and humidifier. Installed Daikin outdoor condensing unit on concrete pad with proper gravel surround for drainage and vibration dampening. Mounted unit against exterior wall with appropriate clearances, installed electrical disconnect box and conduit per code requirements. Connected refrigerant lines with brass service valves and proper insulation. Verified all electrical connections, refrigerant charge levels, and system operations. System commissioned and tested for proper airflow, temperature differential, and humidity control functionality.
Conducted comprehensive assessment of existing HVAC system in basement utility area and presented full system replacement options. Evaluated current Airtemp furnace unit, associated ductwork infrastructure, and auxiliary components including PVC condensate drainage lines and venting systems. Documented existing equipment configuration with detailed photographic records showing furnace positioning, galvanized supply ductwork, plumbing connections, and overall mechanical system layout for replacement proposal development.
Completed installation of 50-gallon Bradford White residential water heater in basement utility area. Removed existing unit and installed new water heater with proper copper supply line connections, expansion tank, pressure relief valve assembly, and all required safety components per manufacturer specifications and local plumbing codes. Verified all connections for proper operation and tested system for leaks.
Performed diagnostic evaluation on 1994 residential air conditioning condenser unit following reported hail damage to condenser fins. Inspected outdoor condensing unit, assessed condition of protective grille, condenser coils, and fan assembly. Unit exhibited significant age-related wear and weathering consistent with 30+ year operational lifespan. Documented current equipment condition through photographic documentation showing intact cabinet structure, operational fan grille assembly, and accessible condenser coils behind protective metal grille. Evaluated feasibility of condenser fin repair versus full system replacement based on equipment age, overall condition, and extent of damage. Provided assessment findings for insurance claim documentation and replacement estimate preparation.
