Solon covers a wide stretch of southeast Cuyahoga County, from SOM Center Road and Aurora Road down toward Cannon Road, Pettibone Road, and the neighborhoods surrounding Solon Community Park and Grantwood Golf Course. With more than 23,000 residents and a large number of homes built between the 1960s and early 2000s, P.K. Wadsworth Heating & Cooling provides service throughout Solon for aging furnaces, electrical upgrades, plumbing repairs, and uneven comfort issues.
Homes near Liberty Road, Bainbridge Road, and the newer developments off US-422 may have systems that have been expanded, updated, or pushed harder than they were originally designed for. If your heating, cooling, plumbing, or electrical system has started causing problems, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service in Solon.
Why Choose P.K. Wadsworth in Solon
P.K. Wadsworth has been serving Northeast Ohio homeowners for decades, and Solon is one of the communities we serve. We service homes near Solon High School, the industrial corridor off Cochran Road, and established neighborhoods where original equipment is now reaching the end of its lifespan.
Renovations to Solon homes can include kitchens, finished basements, home offices, and additions. That can mean HVAC systems, plumbing lines, and electrical panels are carrying more demand today than they were when the home was first built. Our technicians consider the layouts, construction styles, and repair issues in Solon homes.
Heating & Furnace Repair in Solon, OH
A winter heating concern in Solon can start with someone noticing that the furnace never actually shuts off once temperatures drop. In neighborhoods near Hawthorne Valley Country Club, Liberty Hills, and the older subdivisions surrounding SOM Center Road, a system may be heating additions, remodeled lower levels, and larger family rooms that were added years after the original furnace was installed.
Some homes may still have equipment dating to the 1970s, 80s, and 90s. Others have newer furnaces connected to older duct systems that were never redesigned to handle modern airflow demands. That combination can leave upstairs bedrooms colder than the rest of the house while the furnace runs longer than it should.
P.K. Wadsworth provides heating solutions throughout Solon, including:
Air Conditioning & Cooling Services in Solon, OH
Cooling problems in Solon may not affect the entire house equally. Homes near Miles Road, Richmond Road, and the neighborhoods surrounding Solon Community Park may have upstairs rooms becoming uncomfortable by mid-afternoon even though the thermostat downstairs says the house is cooling normally.
The issue can involve airflow distribution, insulation differences between levels, or older systems trying to cool square footage that has expanded over time. Larger two-story homes and properties with vaulted ceilings near US-422 can expose those problems once Northeast Ohio humidity settles in during July and August.
Cooling services available throughout Solon include:
Plumbing & Water Heater Services in Solon, OH
Plumbing issues in Solon can begin as smaller problems people try to work around for a while. Maybe the water heater takes longer to recover in the morning, a basement drain starts backing up during storms, or a sump pump suddenly sounds louder than normal after heavy rain.
Homes near Pettibone Road, Cannon Road, and areas closer to the Chagrin River watershed may depend on sump pump systems to help protect lower levels. Once groundwater starts building up during extended rain, weak sump systems become noticeable very quickly.
P.K. Wadsworth provides plumbing services throughout Solon, including:
Electrical Repair & Upgrades in Solon, OH
Electrical systems in Solon may be handling more demand today than they were originally designed for. Homes near Signature of Solon Country Club, Cannon Road, and newer developments off Aurora Road may support EV chargers, backup generators, larger kitchen appliances, home office equipment, and finished entertainment spaces at the same time.
In older sections of Solon, a panel that was adequate decades ago may now be operating near capacity because the home has gradually expanded around it. Flickering lights, overloaded breakers, and inconsistent power can start appearing after another renovation or appliance upgrade gets added to the system.
Electrical services we provide throughout Solon include:
Indoor Air Quality Solutions for Solon Homes
In some Solon homes, the house never quite feels comfortable even when the temperature setting looks correct. The air feels dry during winter, heavy during humid stretches, or dusty in certain rooms no matter how often filters get changed.
That can happen in larger homes near Liberty Road and newer construction surrounding US-422 where tighter construction keeps conditioned air inside but can also limit ventilation.
P.K. Wadsworth installs and services:
P.K. Wadsworth Service for Solon Homeowners
P.K. Wadsworth provides service in Solon, with a focus on arriving prepared, explaining problems clearly, and respecting the home while we work. Call to discuss your service needs and current appointment availability.
Our service approach includes:
- Experienced HVAC, plumbing, and electrical technicians
- Scheduling based on current availability
- Clear repair recommendations without pressure
- Financing options on qualifying systems
- Respectful service and clean job sites
- Ongoing maintenance plans for long-term system care
From older homes near downtown Solon to newer developments expanding farther south toward Aurora, homeowners may want honest answers about whether something can still be repaired or whether replacement actually makes sense. Our technicians can help you weigh those options.
Schedule Service in Solon
Whether you are dealing with an aging furnace, a failing water heater, electrical upgrades, or cooling problems that keep coming back every summer, P.K. Wadsworth is ready to help. Our technicians provide service throughout Solon, taking the home’s layout and existing systems into account.
Call (440) 588-3025 or contact P.K. Wadsworth online today to schedule heating, cooling, plumbing, or electrical service in Solon, OH 44139.
Recent Jobs and Reviews in Solon, OH
Solon, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in Solon, OH between March 2026 and April 2026.
The most recent job was on April 4, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 1,046 jobs in Solon, OH in the last 12 months.
Job Locations and Reviews
Completed routine cooling season maintenance on residential HVAC system. Performed comprehensive inspection of indoor air handler unit located in crawlspace, including examination of evaporator coil, blower assembly, condensate drain lines, and electrical connections. Verified proper operation of all safety controls and measured system amperage. Inspected outdoor condenser unit, confirmed adequate airflow through coil fins, checked refrigerant lines and electrical disconnect, and verified unit is level on concrete pad with proper clearances maintained. System operating within normal parameters with no deficiencies noted.
Performed comprehensive assessment of existing HVAC system for full replacement estimate. Documented current equipment configuration including 3-ton Goodman condensing unit (Model 4AC13L30P-7A) charged with R-410A refrigerant, gas furnace with air handler, and integrated water heater installation in utility closet. Photographed manufacturer data plates showing electrical specifications of 208/230V single-phase operation and equipment serial numbers for replacement planning. Evaluated cramped mechanical room layout with vertically stacked components to determine optimal replacement equipment sizing and installation approach for complete system upgrade.
Completed heating maintenance tune-up on HVAC system. Inspected and tested electrical components, verified proper voltage readings at 16.1V on system controls, and examined gas valve assembly including choke size specifications. All components found to be in normal operational condition with proper connections and no visible wear or deterioration.
Completed routine heating maintenance inspection on HVAC system. Performed electrical diagnostics using clamp meter, recording amperage draw of 0.37A and verifying proper voltage readings at control board. Inspected circuit board connections, wiring harnesses, and all electrical components for proper operation and secure connections.
Performed routine maintenance flush on residential tanked water heater to remove sediment buildup and ensure optimal performance. Drained unit completely through bottom drain valve into utility sink, cleared accumulated mineral deposits, refilled system, and verified proper operation of all components including temperature/pressure relief valve and heating elements.
Completed scheduled heating maintenance on residential HVAC system. Performed comprehensive system diagnostics using manifold gauges to verify refrigerant pressures and system performance. Inspected all internal electrical components, wiring connections, and capacitor for proper operation and safety compliance. All components found to be in good working condition with secure wire connections and proper routing throughout the unit. System operating within normal parameters.
# HVAC Heating System Maintenance Performed comprehensive heating system maintenance on residential furnace unit. Conducted thorough inspection of all electrical components, control board, and blower motor assembly. Verified proper wire connections at terminal blocks and control module, ensuring all electrical connections were secure and properly terminated. Inspected transformer, circuit board components, and relay controls for proper operation. Checked blower motor assembly and associated wiring for signs of wear or damage. Tested system controls including ON/OFF functionality and verified all safety interlocks were operating correctly. All components found to be in serviceable condition with normal operational wear. System tested and confirmed to be functioning within manufacturer specifications.
Completed comprehensive electrical inspection of residential property. Documented existing electrical panel configuration showing properly organized circuit breakers and wiring, verified kitchen GFCI outlet installation and functionality, and photographed panel-mounted environmental controls for client records.
Conducted plumbing estimate for basement piping replacement. Assessed existing black PVC drainage system with 90-degree elbow configuration mounted against concrete block wall. Documented current pipe condition, including visible sealant application at connection points and overall system layout. Photographed installation to provide comprehensive evaluation for required piping replacement work in utility area.
Completed annual preventive maintenance inspection on residential gas furnace system as part of scheduled maintenance program. Performed comprehensive system evaluation including visual inspection of all internal components, blower motor assembly, gas valve operation, burner assembly, electrical connections, and control board functionality. Verified proper wiring connections throughout unit, checked all safety labels and manufacturer specifications were intact and legible. Accessed interior compartments to inspect compressor connections, circuit board condition, and electrical wiring integrity. All components found operating within normal parameters with no deficiencies noted. System returned to full operational status following completion of routine maintenance procedures.
Completed first-year heating system maintenance inspection and performance verification. Conducted comprehensive combustion analysis using Testo 310 analyzer and measured static pressure differentials with UEI EM152 digital manometer to ensure system operating within manufacturer specifications. All readings documented and system found to be functioning properly with no deficiencies noted.
Completed comprehensive cooling system maintenance and inspection. Performed diagnostic testing of ductwork system using digital measurement tools to verify proper airflow and temperature readings throughout the system. Inspected and documented condition of air filter, which showed moderate dust and debris accumulation with visible pet hair and particulate matter trapped in the filtration media, indicating the filter was performing its intended function of removing airborne contaminants from the system.
Conducted full system replacement estimate for aging HVAC system originally installed in 2009. Documented existing electrical service equipment including Siemens outdoor panel, digital electric meter, and associated conduit routing, as well as current thermostat configuration with programmable digital controls and HVAC wiring connections. Provided comprehensive replacement options for complete system upgrade.
Completed routine heating maintenance on HVAC system, including capacitor inspection and removal for testing or replacement. Performed diagnostic measurements using electronic testing equipment to verify system performance and ensure proper operation of all heating components.
Responded to service call for 1982 Mansfield toilet with deteriorated flush lever gasket that could not be removed by homeowner. Upon inspection, found original toilet tank components showing significant age-related wear, mineral deposits, and water staining throughout interior surfaces. Assessed existing standard-height toilet and discussed replacement options with comfort-height models from Kohler and comparable manufacturers. Documented existing floor conditions showing tile staining around toilet base and evaluated water supply line connection. Provided recommendations for complete toilet replacement to address both the immediate gasket failure and prevent future issues related to aging components.
Performed comprehensive heating system maintenance inspection on residential furnace unit. Accessed internal components to examine control board wiring connections, verifying all wire terminations were secure and properly seated. Conducted combustion analysis testing using calibrated Testo 310 analyzer, recording temperature and CO readings to ensure safe and efficient burner operation within manufacturer specifications.
Responded to customer complaint of unusual noise from furnace. Performed thorough inspection of internal components including heat exchanger, blower assembly, and ductwork. Conducted combustion analysis using Testo 310 analyzer, which measured carbon monoxide levels at 11 ppm and flue temperature at 70°F. All readings within normal operating parameters. Inspected blower motor, mounting brackets, and condensate pan for loose components or debris that could cause noise. System operating safely with proper combustion efficiency.
Completed installation of Water Furnace geothermal heat pump system model WSAV072BD1A12C1L2B in basement mechanical room. Unit was installed with integrated humidifier, connected to ground loop system, and all electrical connections completed per manufacturer specifications at 208-230V service. System is operational and awaiting line bleeding by drilling company to finalize ground loop commissioning.
Completed installation of new black air handler unit in attic space with proper mounting and positioning. Installed and verified 250-amp rated FLNR fuses in disconnect assembly, connected flexible ductwork, and completed all electrical wiring connections including proper wire management and terminations. System inspected and confirmed operational with all manufacturer specifications met and balance collected upon completion.
Completed installation of 26kW standby generator system with extended warranty coverage. Installed generator unit on prepared concrete pad adjacent to brick structure, positioned appropriately for code compliance and optimal ventilation. Ran electrical conduit and wiring from main service panel to generator transfer switch, ensuring proper gauge conductors for rated capacity. Connected natural gas supply line using approved copper tubing and fittings. Installed and wired automatic transfer switch with all necessary control circuits. Verified all electrical connections, performed system startup procedures, and tested automatic transfer functionality under simulated power loss conditions. System operating within manufacturer specifications and ready for automatic operation during utility power interruptions.
