Solon covers a wide stretch of southeast Cuyahoga County, from SOM Center Road and Aurora Road down toward Cannon Road, Pettibone Road, and the neighborhoods surrounding Solon Community Park and Grantwood Golf Course. With more than 23,000 residents and a large number of homes built between the 1960s and early 2000s, P.K. Wadsworth Heating & Cooling provides service throughout Solon for aging furnaces, electrical upgrades, plumbing repairs, and uneven comfort issues.
Homes near Liberty Road, Bainbridge Road, and the newer developments off US-422 may have systems that have been expanded, updated, or pushed harder than they were originally designed for. If your heating, cooling, plumbing, or electrical system has started causing problems, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service in Solon.
Why Choose P.K. Wadsworth in Solon
P.K. Wadsworth has been serving Northeast Ohio homeowners for decades, and Solon is one of the communities we serve. We service homes near Solon High School, the industrial corridor off Cochran Road, and established neighborhoods where original equipment is now reaching the end of its lifespan.
Renovations to Solon homes can include kitchens, finished basements, home offices, and additions. That can mean HVAC systems, plumbing lines, and electrical panels are carrying more demand today than they were when the home was first built. Our technicians consider the layouts, construction styles, and repair issues in Solon homes.
Heating & Furnace Repair in Solon, OH
A winter heating concern in Solon can start with someone noticing that the furnace never actually shuts off once temperatures drop. In neighborhoods near Hawthorne Valley Country Club, Liberty Hills, and the older subdivisions surrounding SOM Center Road, a system may be heating additions, remodeled lower levels, and larger family rooms that were added years after the original furnace was installed.
Some homes may still have equipment dating to the 1970s, 80s, and 90s. Others have newer furnaces connected to older duct systems that were never redesigned to handle modern airflow demands. That combination can leave upstairs bedrooms colder than the rest of the house while the furnace runs longer than it should.
P.K. Wadsworth provides heating solutions throughout Solon, including:
Air Conditioning & Cooling Services in Solon, OH
Cooling problems in Solon may not affect the entire house equally. Homes near Miles Road, Richmond Road, and the neighborhoods surrounding Solon Community Park may have upstairs rooms becoming uncomfortable by mid-afternoon even though the thermostat downstairs says the house is cooling normally.
The issue can involve airflow distribution, insulation differences between levels, or older systems trying to cool square footage that has expanded over time. Larger two-story homes and properties with vaulted ceilings near US-422 can expose those problems once Northeast Ohio humidity settles in during July and August.
Cooling services available throughout Solon include:
Plumbing & Water Heater Services in Solon, OH
Plumbing issues in Solon can begin as smaller problems people try to work around for a while. Maybe the water heater takes longer to recover in the morning, a basement drain starts backing up during storms, or a sump pump suddenly sounds louder than normal after heavy rain.
Homes near Pettibone Road, Cannon Road, and areas closer to the Chagrin River watershed may depend on sump pump systems to help protect lower levels. Once groundwater starts building up during extended rain, weak sump systems become noticeable very quickly.
P.K. Wadsworth provides plumbing services throughout Solon, including:
Electrical Repair & Upgrades in Solon, OH
Electrical systems in Solon may be handling more demand today than they were originally designed for. Homes near Signature of Solon Country Club, Cannon Road, and newer developments off Aurora Road may support EV chargers, backup generators, larger kitchen appliances, home office equipment, and finished entertainment spaces at the same time.
In older sections of Solon, a panel that was adequate decades ago may now be operating near capacity because the home has gradually expanded around it. Flickering lights, overloaded breakers, and inconsistent power can start appearing after another renovation or appliance upgrade gets added to the system.
Electrical services we provide throughout Solon include:
Indoor Air Quality Solutions for Solon Homes
In some Solon homes, the house never quite feels comfortable even when the temperature setting looks correct. The air feels dry during winter, heavy during humid stretches, or dusty in certain rooms no matter how often filters get changed.
That can happen in larger homes near Liberty Road and newer construction surrounding US-422 where tighter construction keeps conditioned air inside but can also limit ventilation.
P.K. Wadsworth installs and services:
P.K. Wadsworth Service for Solon Homeowners
P.K. Wadsworth provides service in Solon, with a focus on arriving prepared, explaining problems clearly, and respecting the home while we work. Call to discuss your service needs and current appointment availability.
Our service approach includes:
- Experienced HVAC, plumbing, and electrical technicians
- Scheduling based on current availability
- Clear repair recommendations without pressure
- Financing options on qualifying systems
- Respectful service and clean job sites
- Ongoing maintenance plans for long-term system care
From older homes near downtown Solon to newer developments expanding farther south toward Aurora, homeowners may want honest answers about whether something can still be repaired or whether replacement actually makes sense. Our technicians can help you weigh those options.
Schedule Service in Solon
Whether you are dealing with an aging furnace, a failing water heater, electrical upgrades, or cooling problems that keep coming back every summer, P.K. Wadsworth is ready to help. Our technicians provide service throughout Solon, taking the home’s layout and existing systems into account.
Call (440) 588-3025 or contact P.K. Wadsworth online today to schedule heating, cooling, plumbing, or electrical service in Solon, OH 44139.
Recent Jobs and Reviews in Solon, OH
Solon, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in Solon, OH in March 2026.
The most recent job was on March 21, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 1,046 jobs in Solon, OH in the last 12 months.
Job Locations and Reviews
Conducted site assessment for potential furnace replacement, documenting the existing electrical service infrastructure including meter location and available power connections. Photographed exterior electrical setup to evaluate capacity for supporting new HVAC equipment installation requirements.
Performed scheduled preventative maintenance on furnace system. Inspected internal electrical components including motor assemblies, wiring connections, and control board functionality. Examined PVC venting system and condensate drainage components for proper installation and operation.
Performed routine maintenance on residential heating system, including inspection of furnace blower motor, electrical connections, and associated ductwork. Examined water heater installation and verified proper operation of control panel/thermostat. All components functioning within normal parameters; no issues requiring remediation were identified.
Performed scheduled heating maintenance on two systems. Inspected blower motor assembly and electrical connections, confirming proper installation with all wiring intact. Conducted combustion analysis using Testo 310 meter, which indicated 12.1% oxygen level and 35 ppm carbon monoxide, both within acceptable parameters for safe operation.
Successfully installed a complete 96% efficiency furnace system with AC, humidifier, and tankless water heater. The outdoor condenser unit was properly mounted on a concrete pad with all necessary electrical and refrigerant line connections. Interior installation included copper piping configuration with PVC venting for the high-efficiency appliances, with all systems tested and confirmed operational.
Conducted evaluation of existing geothermal system that has been malfunctioning throughout winter season. Performed diagnostic testing with multimeter showing readings of 12.0V/2.7A and documented electrical panel configuration. Customer is considering conversion to heat pump system or forced air with heat pump backup.
Completed installation of a 22kW Generac generator system with extended warranty. Mounted the Generac transfer switch on cinder block wall with proper conduit connections and prepared the ground area for generator placement. All electrical connections were completed according to manufacturer specifications.
Performed scheduled heating maintenance service on residential furnace system. Conducted differential pressure testing with manometer, obtaining readings of 3.08 indicating proper operation within manufacturer specifications. Inspected complete system including furnace, ductwork, electrical connections, and humidifier, confirming all components are functioning correctly with no issues detected.
Responded to service call regarding thermostat error message. Removed thermostat wall plate to inspect wiring connections, then reinstalled and tested Honeywell Home ProSeries digital thermostat. Confirmed proper operation with heat set to 79°F and humidity reading at 44%.
Conducted inspection of damaged AC unit affected by gutter issues. Evaluated HVAC system including ductwork in basement area and verified operation of existing Honeywell thermostat which was reading 69° with heat function operational. Presented replacement options for the damaged air conditioning system.
Responded to service call for communication issue between thermostat and newly installed furnace. Diagnosed and resolved connectivity problem with Honeywell Home ProSeries thermostat. Verified proper operation of the complete HVAC system including the Aprilaire whole-home humidifier.
Successfully installed new furnace unit with proper ductwork connection in basement location. Completed PVC venting system installation according to manufacturer specifications. Carbon monoxide detector was installed and tested to ensure proper safety compliance.
Conducted scheduled heating maintenance on furnace system. Performed combustion analysis with Klein Tools ET180 Differential Manometer, confirming gas pressure at 3.13" WC, within manufacturer specifications. Inspected water heater and surrounding mechanical area for proper clearances and ventilation in the confined utility space.
Performed scheduled preventative maintenance on residential furnace system. Inspected complete system including main heating unit, Space-Gard air cleaner, PVC ventilation components, gas connections, and condensate drainage. All components functioning properly with no issues identified during this routine maintenance visit.
Performed scheduled heating maintenance on furnace system. Conducted comprehensive diagnostic testing using Testo 310 analyzer to verify proper combustion efficiency (9.2%) and temperature readings (33.8°F). Inspected internal components with access panel removed, ensuring proper operation of all mechanical and electrical elements.
Conducted site assessment for potential generator installation, photographed the proposed location, and marked out installation area with blue paint. Evaluated proximity to building foundation, existing utility connections, and identified suitable placement adjacent to the structure's exterior wall where proper ventilation and code requirements can be met.
Performed scheduled maintenance on residential gas furnace system. Inspected burner assembly, gas valve components, and wiring connections for proper operation. Examined humidifier attachment and PVC ventilation system, confirming all components functioning within specifications.
Diagnosed no-heat issue on furnace system featuring an AirBoss by Arzel zoning control installed in 2003. Inspection revealed significant dust accumulation in ductwork and poor airflow distribution. Cleaned control board connections, restored proper system operation, and verified heating function across all zones.
Conducted full system evaluation for furnace and AC replacement options. Inspected existing GeoSpring water heater system with digital controls and associated plumbing infrastructure. Examined PVC drainage configuration and evaluated current insulation conditions in utility area to determine optimal installation approach for new HVAC components.
Performed scheduled heating maintenance service on furnace system. Inspected and documented condition of blower motor assembly, including motor housing, wiring connections, and mounting brackets. Visual inspection revealed normal wear with some minor oxidation on metal components, but all electrical connections were secure with proper wire routing.
