Solon covers a wide stretch of southeast Cuyahoga County, from SOM Center Road and Aurora Road down toward Cannon Road, Pettibone Road, and the neighborhoods surrounding Solon Community Park and Grantwood Golf Course. With more than 23,000 residents and a large number of homes built between the 1960s and early 2000s, P.K. Wadsworth Heating & Cooling provides service throughout Solon for aging furnaces, electrical upgrades, plumbing repairs, and uneven comfort issues.
Homes near Liberty Road, Bainbridge Road, and the newer developments off US-422 may have systems that have been expanded, updated, or pushed harder than they were originally designed for. If your heating, cooling, plumbing, or electrical system has started causing problems, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service in Solon.
Why Choose P.K. Wadsworth in Solon
P.K. Wadsworth has been serving Northeast Ohio homeowners for decades, and Solon is one of the communities we serve. We service homes near Solon High School, the industrial corridor off Cochran Road, and established neighborhoods where original equipment is now reaching the end of its lifespan.
Renovations to Solon homes can include kitchens, finished basements, home offices, and additions. That can mean HVAC systems, plumbing lines, and electrical panels are carrying more demand today than they were when the home was first built. Our technicians consider the layouts, construction styles, and repair issues in Solon homes.
Heating & Furnace Repair in Solon, OH
A winter heating concern in Solon can start with someone noticing that the furnace never actually shuts off once temperatures drop. In neighborhoods near Hawthorne Valley Country Club, Liberty Hills, and the older subdivisions surrounding SOM Center Road, a system may be heating additions, remodeled lower levels, and larger family rooms that were added years after the original furnace was installed.
Some homes may still have equipment dating to the 1970s, 80s, and 90s. Others have newer furnaces connected to older duct systems that were never redesigned to handle modern airflow demands. That combination can leave upstairs bedrooms colder than the rest of the house while the furnace runs longer than it should.
P.K. Wadsworth provides heating solutions throughout Solon, including:
Air Conditioning & Cooling Services in Solon, OH
Cooling problems in Solon may not affect the entire house equally. Homes near Miles Road, Richmond Road, and the neighborhoods surrounding Solon Community Park may have upstairs rooms becoming uncomfortable by mid-afternoon even though the thermostat downstairs says the house is cooling normally.
The issue can involve airflow distribution, insulation differences between levels, or older systems trying to cool square footage that has expanded over time. Larger two-story homes and properties with vaulted ceilings near US-422 can expose those problems once Northeast Ohio humidity settles in during July and August.
Cooling services available throughout Solon include:
Plumbing & Water Heater Services in Solon, OH
Plumbing issues in Solon can begin as smaller problems people try to work around for a while. Maybe the water heater takes longer to recover in the morning, a basement drain starts backing up during storms, or a sump pump suddenly sounds louder than normal after heavy rain.
Homes near Pettibone Road, Cannon Road, and areas closer to the Chagrin River watershed may depend on sump pump systems to help protect lower levels. Once groundwater starts building up during extended rain, weak sump systems become noticeable very quickly.
P.K. Wadsworth provides plumbing services throughout Solon, including:
Electrical Repair & Upgrades in Solon, OH
Electrical systems in Solon may be handling more demand today than they were originally designed for. Homes near Signature of Solon Country Club, Cannon Road, and newer developments off Aurora Road may support EV chargers, backup generators, larger kitchen appliances, home office equipment, and finished entertainment spaces at the same time.
In older sections of Solon, a panel that was adequate decades ago may now be operating near capacity because the home has gradually expanded around it. Flickering lights, overloaded breakers, and inconsistent power can start appearing after another renovation or appliance upgrade gets added to the system.
Electrical services we provide throughout Solon include:
Indoor Air Quality Solutions for Solon Homes
In some Solon homes, the house never quite feels comfortable even when the temperature setting looks correct. The air feels dry during winter, heavy during humid stretches, or dusty in certain rooms no matter how often filters get changed.
That can happen in larger homes near Liberty Road and newer construction surrounding US-422 where tighter construction keeps conditioned air inside but can also limit ventilation.
P.K. Wadsworth installs and services:
P.K. Wadsworth Service for Solon Homeowners
P.K. Wadsworth provides service in Solon, with a focus on arriving prepared, explaining problems clearly, and respecting the home while we work. Call to discuss your service needs and current appointment availability.
Our service approach includes:
- Experienced HVAC, plumbing, and electrical technicians
- Scheduling based on current availability
- Clear repair recommendations without pressure
- Financing options on qualifying systems
- Respectful service and clean job sites
- Ongoing maintenance plans for long-term system care
From older homes near downtown Solon to newer developments expanding farther south toward Aurora, homeowners may want honest answers about whether something can still be repaired or whether replacement actually makes sense. Our technicians can help you weigh those options.
Schedule Service in Solon
Whether you are dealing with an aging furnace, a failing water heater, electrical upgrades, or cooling problems that keep coming back every summer, P.K. Wadsworth is ready to help. Our technicians provide service throughout Solon, taking the home’s layout and existing systems into account.
Call (440) 588-3025 or contact P.K. Wadsworth online today to schedule heating, cooling, plumbing, or electrical service in Solon, OH 44139.
Recent Jobs and Reviews in Solon, OH
Solon, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in Solon, OH in September 2026.
The most recent job was on September 25, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 1,040 jobs in Solon, OH in the last 12 months.
Job Locations and Reviews
Completed scheduled heating maintenance visit on residential furnace system. Performed comprehensive system inspection including electrical measurements using digital clamp meter, recording operating amperage of 39.1A and verifying proper voltage readings to confirm system performance within manufacturer specifications. Replaced HVAC air filters with new pleated media filters to maintain optimal airflow and indoor air quality for the heating season.
Completed scheduled preventive maintenance on residential furnace system as part of ongoing heating service plan. Performed comprehensive inspection of heating equipment, verified operational parameters using digital temperature measurement tools, and documented system conditions with photographic evidence. All components found to be functioning within normal specifications with no immediate repairs required.
Completed diagnostic evaluation of existing heating system and presented furnace replacement options to customer. Assessed current equipment condition, discussed available furnace models and efficiency ratings, and provided comprehensive estimate for system replacement. Customer credited diagnostic fee toward future installation.
Responded to no heat call and performed diagnostic testing on furnace system. Upon inspection, utilized digital manometer to measure pressure readings within the HVAC unit, which indicated abnormal values. Further investigation revealed issues with the control board, where visual inspection showed a displaced blue electrolytic capacitor and potential component failure on the PCB. Diagnosed control board malfunction as the root cause of heating system failure and documented findings with diagnostic measurements and circuit board condition for repair recommendations.
Completed on-site electrical estimate for residential standby generator installation. Assessed exterior mounting location on white vinyl siding near existing gas meter and utility infrastructure at foundation level, evaluating accessibility for generator placement, fuel line connection, and proper clearances from building structure and landscaping. Inspected basement utility room and documented existing electrical service panel location, main water service entry point, and available routing paths for electrical conduit and transfer switch installation. Photographed site conditions including exterior utility connections, foundation area, and interior basement infrastructure to support equipment sizing recommendations and installation planning.
Completed comprehensive heating and cooling maintenance on two HVAC systems, including an indoor Carrier air handler unit and outdoor condenser unit. Performed routine inspections, system checks, and preventive maintenance procedures to ensure optimal performance and efficiency for both heating and cooling operations heading into the seasonal transition.
Completed scheduled heating maintenance on furnace system as part of ongoing preventative maintenance program. Performed comprehensive inspection of furnace components including blower motor assembly, electrical connections, and supply ductwork. Verified proper motor operation and inspected wiring harnesses and connector blocks for secure connections and signs of wear. Measured supply air temperature at ductwork, recording 116.4°F, confirming adequate heat output and proper furnace operation. All system components found to be functioning within normal parameters with no issues identified requiring immediate attention.
Completed scheduled heating maintenance on furnace system as part of ongoing preventive maintenance program. Performed thorough inspection of blower assembly, verifying proper operation of squirrel cage fan and centrifugal blower wheel components. Conducted electrical diagnostics using digital multimeter to verify system voltage, capacitance, and overall electrical performance. All components inspected and found operating within normal parameters, ensuring system readiness for heating season.
Completed routine plumbing maintenance visit focusing on tankless water heater system inspection. Inspected Rinnai tankless water heater unit, verified proper operation of all connections including PEX supply lines, brass fittings, valves, and gas line connections. Examined and cleaned filter trap component, removing accumulated lint and debris to maintain optimal system performance and water flow efficiency.
Completed scheduled heating maintenance on furnace system as part of recurring service plan. Performed comprehensive system inspection and testing using digital multimeter to verify electrical components and connections. During inspection, identified significant rust and corrosion on interior metal mounting surfaces and panels, indicating prolonged moisture exposure. Documented condition of blower motor assembly, wiring connections, and control panel components. All electrical measurements recorded within acceptable parameters. System operational at time of service completion.
Responded to no heat call on residential furnace. Upon arrival, performed diagnostic testing using pressure measurement and electrical testing equipment to troubleshoot system failure. Identified issue, completed necessary repairs, and restored heating operation to unit.
Completed installation of a 22kW standby generator system at residential property. Excavated trench from main electrical panel to generator pad location and ran approximately 20 feet of 4/0 THHN conductors for power supply connection. Set generator unit on prepared concrete pad adjacent to building exterior, established proper clearances per manufacturer specifications, and made all electrical connections to transfer switch. Tested automatic transfer switch operation, verified proper voltage output under load, and confirmed seamless transition between utility and generator power. System commissioned successfully with standard 5-year engine warranty, 3-year parts warranty, and 2-year labor warranty coverage in effect.
Responded to service call for reported furnace leak. Upon inspection, identified condensate drainage issue affecting the heating system. Installed new condensate drain assembly with PVC piping configuration and proper trap to prevent future water accumulation. System tested and verified operational with no active leaks present at time of departure.
Responded to service call for reported water heater leak. Upon arrival, conducted visual inspection of tanked water heater unit located in basement utility area. Documented equipment condition and surrounding plumbing connections with photographs for service records.
Responded to no cooling call where outdoor condenser unit was not operating. Upon inspection, found blown fuses in the outdoor unit's electrical panel. Replaced defective fuses and verified proper capacitor operation and all electrical connections. System tested successfully with condenser fan motor and compressor operating normally, restoring full cooling function to the unit.
Performed comprehensive heating system tune-up on residential furnace and inspected associated HVAC components. Conducted visual inspection of ductwork interior, noting dust accumulation and minor surface corrosion typical of normal system operation. Completed standard maintenance procedures on gas furnace unit, verified proper operation of water heater with diagnostic testing equipment, and confirmed all mechanical connections and piping systems were secure and functioning correctly.
Completed electrical estimate for basement panel installation experiencing broken breaker and loss of power to wall circuits. Inspected dual-panel electrical system with organized conduit routing, documented existing infrastructure including main and sub-panels mounted on OSB and concrete block walls, and assessed circuit distribution to identify source of electrical failure requiring repair.
Conducted comprehensive site evaluation for standby generator installation at residential property. Assessed existing natural gas infrastructure, including aged exterior gas meter with multiple dials and corroded brass connections, and interior gas line configuration featuring copper piping, black flow control device, and red-handled shut-off valve mounted on basement utility wall. Documented current electrical panel location and utility connections to determine optimal generator placement, fuel source accessibility, and transfer switch integration requirements. Photographed all relevant infrastructure components to support equipment sizing recommendations and installation planning.
Responded to no-heat call where thermostat was unresponsive and failing to activate heating system despite 14-degree temperature differential. Diagnosed faulty thermostat, replaced unit, and verified proper system operation with heating cycle initiation and accurate temperature reading.
Completed scheduled heating maintenance on residential furnace system. Performed comprehensive inspection of all major components including heat exchanger, blower assembly, and condensate drainage system. Inspected and tested furnace condensate trap and drain line assembly, verifying proper drainage and trap seal integrity. Examined all electrical connections, control wiring, and safety switches for secure mounting and proper operation. Utilized digital multimeter to verify electrical readings and system performance parameters. Checked gas supply piping, connections, and shut-off valve for leaks and proper installation. All components found to be operating within normal specifications with no immediate concerns identified. System ready for heating season operation.
