P.K. Wadsworth Heating & Cooling has striven to give our clients the best heating, AC, and water heater services available since 1936. Since then, we’ve earned over 32,000 five-star reviews from our residential and commercial clients. When your home systems give you trouble, we’ll be there to help so you can spend your time keeping your business running or enjoying all our beautiful city has to offer, including Liberty Park and Blue Hen Falls.
Contact P.K. Wadsworth Heating & Cooling for dependable HVAC and water heater solutions in Twinsburg, OH.
Reliable AC & Cooling Services
When the temperature rises, having AC you can count on is critical. A home without air conditioning is left open to an overload of contaminants, putting indoor air quality at risk. We offer various cooling services to keep your air conditioner running, including installation, replacement, repair, and maintenance. Our knowledgeable technicians can handle multiple systems, including:
- Ductless mini-splits: These modern options are a fantastic solution for homes that lack the ductwork a traditional AC system requires. They can also be combined with other AC types to improve energy efficiency.
- Heat pumps: You can combine heating and cooling into one with a heat pump, which offers lower-cost solutions for maintaining your home’s temperature.
Thorough Heating Repair & Replacement
Heat is crucial to the health and comfort of your home as Twinsburg temperatures drop. Our expert heating technicians are trained in various heating services, including replacement, installation, maintenance, and repair. We have decades of knowledge and are capable of handling multiple systems like:
- Furnaces: Whether you’re having issues with your pilot light or the unit isn’t hot enough, we can fix your gas, electric, or oil furnace.
- Boilers: These units offer dual capabilities of heating your home and providing hot water.
Indoor Air Quality Services in Twinsburg
The condition of your indoor air influences every area of your life. If it’s unhealthy, so are you. This is why we supply the best indoor air quality services available.
- Air purifiers: Systems like HEPA filters rid the air in your home of debris, pet dander, and other contaminants, lessening the load on your respiratory system.
- Air scrubbers: These units remove mold, pollen, odors, and germs, allowing your loved ones to breathe more easily.
- Humidifiers: Air craves moisture, and when it’s too dry, it’ll take it from any source, including you and your furniture. Using a humidifier helps balance humidity levels and protect your home and body.
- Dehumidifiers: When the air is too humid, mildew and mold grow in walls, risking damage to wooden structures. Dehumidifiers help protect your home by ridding it of excess moisture.
Top-Rated Water Heater & Plumbing Services
A working plumbing system is a cornerstone of a modern home, and hot water is key in multiple areas of life, including hygiene and cooking. We offer expert plumbing services to keep your pipes and water-based appliances running smoothly, such as:
- Water heater services: Whether you’re experiencing no hot water or some other issue, our expert plumbing technicians can fix it.
- Tankless water heater services: When sized to your needs, these units offer several benefits, including endless hot water. If you want to add a tankless water heater to your life, our knowledgeable technicians will be happy to walk you through the options.
Schedule With P.K. Wadsworth Heating & Cooling In Twinsburg Today
With over eight decades in business, P.K. Wadsworth Heating & Cooling understands the Twinsburg area. We’re family-operated and passionate about delivering reliable services on time. We keep our estimates free and our pricing upfront and instant, so there are no nasty surprises. To help take the headache out of maintaining your home systems, we offer same-day services and maintenance plans.
For professional home services in the Twinsburg area, schedule an appointment with P.K. Wadsworth Heating & Cooling today!
Recent Jobs and Reviews in Twinsburg, OH
Job Locations and Reviews
Performed routine maintenance on tanked water heater system, including comprehensive inspection of all critical components. Verified proper operation of temperature and pressure relief valve, confirmed pressure gauge readings within normal parameters (0-200 PSI range), and inspected all brass fittings and connections for signs of corrosion or leakage. Examined burner assembly and combustion chamber, confirming proper ignition system function with clean blue flame pattern indicating efficient fuel combustion. All electrical connections, wiring, and control components inspected and found in good working order.
Completed annual preventative maintenance inspection on residential gas furnace as part of scheduled service plan. Performed comprehensive system evaluation including inspection of burner assembly, heat exchanger, gas valve connections, blower motor assembly, electrical components and wiring, control boards, and PVC venting system. All components found operating within normal parameters with no immediate repairs required at this time.
Responded to no heat call on Lennox furnace system, serial number 19577807C, approximately 10-15 years old. Customer reported complete loss of heating function with no blower operation, though air conditioning system remained functional. Upon inspection, documented equipment specifications and observed condensation accumulation on main supply ductwork. Diagnosed heating system failure and documented equipment condition with photographic evidence for service records under active service plan coverage.
Provided HVAC replacement estimate for outdoor air conditioning unit with multiple access options. Existing furnace is four years old and in good condition, requiring only AC system replacement. Unit location offers easy access for installation, with existing electrical disconnect and refrigerant line routing already in place along exterior wall.
Completed comprehensive heating maintenance on Goodman furnace system. Performed thorough inspection of blower motor assembly, verified electrical connections, tested control board functionality, and examined all internal mechanical components with access panels removed. Inspected PVC condensate drainage system, ductwork insulation integrity, and confirmed proper system operation using diagnostic testing equipment.
Completed routine heating maintenance inspection on HVAC system. Accessed interior components through main service panel, inspected electrical connections and wiring harnesses for proper termination and signs of wear, verified compressor unit condition, and examined refrigerant line insulation and valve assemblies. Cleaned accumulated dust and debris from interior compartment and surrounding surfaces to ensure optimal airflow and system efficiency.
Installed two 1/2-inch ball valves in the access panel to provide individual shut-off capability for the second-floor shower fixture. Accessed the plumbing lines through the existing utility room access point where the water supply lines were located behind the painted concrete block wall. The new ball valves were installed on the hot and cold water supply lines serving the chrome shower valve assembly, allowing for future maintenance and repairs to be completed without shutting off water to the entire home.
Responded to no cooling call on 6-month-old Amana central air conditioning system with gas furnace located in basement. Upon arrival, confirmed system was not operating in either heating or cooling mode. Performed diagnostic evaluation of the complete HVAC system including electrical connections, thermostat communication, and refrigerant circuit. Inspected furnace control board, blower motor operation, and condensate drainage system. Verified all safety switches, pressure switches, and limit controls for proper function. Checked air handler and evaporator coil for airflow restrictions. System covered under manufacturer warranty. Documented equipment model numbers and captured photographic evidence of installation and current system condition for warranty claim processing.
Completed cooling maintenance on residential air conditioning system. Verified thermostat reading of 72 degrees, confirmed proper airflow with fan operating in auto mode, and performed standard diagnostic testing using refrigerant gauges and meters to ensure system functionality and optimal performance.
Completed first-year heating maintenance on system. Performed combustion analysis using Testo 310 analyzer, recording temperature differentials and verifying proper burner operation. Checked electrical components with digital multimeter to ensure system operating within manufacturer specifications.
Completed annual preventative maintenance inspection on gas furnace system. Performed comprehensive system evaluation including visual inspection of internal components, ductwork connections, electrical wiring, control boards, blower assembly, and gas valve operation. Verified proper thermostat wiring connections at control board, checked all electrical terminations for secure contact, and confirmed furnace cabinet integrity and access panel condition. All components found operating within normal parameters with no immediate service needs identified.
Completed first-year heating maintenance on residential HVAC system. Performed comprehensive inspection of furnace components including blower motor assembly, heat exchanger, electrical connections, and refrigerant lines. All wiring connections were verified secure, blower motor operation confirmed normal, and heat exchanger inspected for proper condition with no visible concerns noted.
Completed first-year maintenance inspection on tankless water heater system. Performed visual assessment of all plumbing connections, copper supply lines, shut-off valves, and associated piping infrastructure. Inspected water meter assembly, valve operations, and verified proper clearances around equipment. Documented existing copper pipe oxidation and overall system condition with photographic records for maintenance history.
Completed scheduled preventive maintenance on residential furnace system. Performed comprehensive inspection of heat exchanger, evaporator coil, and refrigerant lines, verifying all components were operating within manufacturer specifications. Conducted combustion analysis using calibrated testing equipment, confirming CO levels at 34 ppm and optimal combustion efficiency at safe operating parameters.
Installed a five-arm brass chandelier with candle-style bulbs and clear glass hurricane shades in dining area at ceiling height of 15-18 feet. Verified proper electrical connections, tested dimmer switch functionality, and confirmed all bulbs illuminated correctly upon completion.
Performed comprehensive first-year heating maintenance on residential furnace system. Conducted complete system diagnostics using Testo 310 combustion analyzer to verify proper burner operation, flue gas composition, and venting efficiency. Accessed internal components through front service panel to inspect control board, wiring connections, and electrical systems. All colored wire connections to circuit board examined and confirmed secure. Evaluated condensate drainage system and PVC venting pipes for proper installation and function. Utilized digital diagnostic meters to test system performance parameters and verify all safety controls operating within manufacturer specifications. Inspected ductwork connections and confirmed proper airflow distribution. System found operating efficiently with all components functioning as designed.
Responded to report of gas leak originating from beneath kitchen area in basement. Upon inspection, accessed crawl space and examined exposed gas piping system running through ceiling joists. Located copper gas line with brass fittings and connections running horizontally through the space. Conducted visual inspection of all accessible gas line sections, joints, and fittings for signs of leakage or damage. Documented existing piping configuration including routing near PVC plumbing lines and HVAC ductwork. Further pressure testing recommended to confirm leak location and ensure system integrity before proceeding with repairs.
Completed scheduled heating maintenance on residential forced-air furnace system. Performed comprehensive inspection of gas furnace unit, including visual examination of heat exchanger, burner assembly, and electrical control board with all wire connections verified secure. Inspected Aprilaire 600 humidifier installation and confirmed proper operation. Verified 16x20x1 air filter condition and documented maintenance date on filter frame for tracking purposes. All system components found in good working order with no deficiencies noted.
Completed plumbing inspection addressing slow faucet leak in upstairs bathroom and evaluated shower access panel plumbing configuration. Assessed current system requiring full home water shutdown for shower service and provided recommendations for installing isolation valves to allow localized shutoff capability. Documented existing plumbing infrastructure including tankless water heater installation, main water meter assembly with shutoff valves, and copper supply line routing for quote preparation.
Performed scheduled heating maintenance on Amana furnace system. Conducted differential pressure testing with manometer showing 35.1, verifying proper combustion and ventilation. Inspected all components including ductwork, PVC intake/exhaust venting, and associated equipment; system functioning within normal parameters.
