University Heights is home to John Carroll University. Whether you live near the campus or along the Cedar Road corridor, your heating, cooling, plumbing and electrical needs depend on your home’s equipment and the way you use each space.
P.K. Wadsworth provides HVAC, plumbing and electrical services in University Heights. If your home has started feeling harder to heat, cool, or maintain the way it once did, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service.
Service Planning for Your University Heights Home
A finished lower level, a remodeled kitchen, or an EV charger can change what you need from your home’s systems. If you are planning an improvement, consider the heating, cooling, plumbing and electrical work involved before choosing equipment.
For an existing problem, start with what has changed: a room that no longer feels comfortable, a drain that keeps slowing down, or a breaker that trips during normal use. Describe those symptoms when you schedule service so the visit can focus on the issue you want addressed.
Boiler, Furnace & Heating Repair in University Heights, OH
Upstairs bedrooms staying cold during winter can be frustrating even when the rest of the house feels warm. Uneven radiator circulation and airflow through long duct runs are among the issues to consider, depending on the heating system in your home.
P.K. Wadsworth provides heating services in University Heights, including:
AC Repair & Cooling Solutions in University Heights, OH
If a second floor becomes uncomfortable by late afternoon, tell us which rooms are affected and whether the problem changes during the day. That information helps distinguish a whole-home cooling concern from a comfort problem limited to one part of the house.
Cooling and air conditioning services available in University Heights include:
For a finished attic, enclosed upper room, or other space that is difficult to cool, ask about ductless air conditioning or zoned cooling. The appropriate option depends on the existing system and the space you need to serve.
Plumbing & Water Heater Repair in University Heights, OH
Slow drains, a leaking connection, or a water heater that is no longer meeting your household’s needs each call for a different plumbing service. P.K. Wadsworth offers repair and installation options for University Heights homeowners, from individual fixtures to piping and water heaters.
P.K. Wadsworth provides plumbing services in University Heights, including:
Electrical Repair & Panel Upgrades in University Heights, OH
EV chargers, larger kitchen appliances, remote work setups, and backup generators can change the demands placed on a home’s electrical system. Before adding equipment, ask an electrician to review the panel, circuits and connections needed for the work.
P.K. Wadsworth provides electrical services in University Heights, including:
Indoor Air Quality & Humidity Control in University Heights, OH
Dry winter air, stale airflow, humidity swings, and excess dust can affect how comfortable a home feels even when the thermostat appears correct. If temperature adjustments are not addressing your concern, ask about filtration and humidity-control options for your existing system.
P.K. Wadsworth installs and services:
One Contact for University Heights Home Services
P.K. Wadsworth offers heating, cooling, plumbing, electrical and indoor air quality services, giving University Heights homeowners one company to contact for a range of household needs. Whether you are arranging a repair or considering a replacement, bring your questions about the existing equipment and what you want to improve.
Schedule Service in University Heights
A service request can begin with one specific concern: uneven boiler heat, second-floor cooling, a recurring drain problem, or an electrical upgrade you are planning. Let P.K. Wadsworth know what you have noticed and which part of your home needs attention.
If your house no longer feels as comfortable or reliable as it once did, P.K. Wadsworth is ready to help. Call (440) 588-3025 or contact us online to schedule HVAC, plumbing, or electrical service in University Heights, OH.
Recent Jobs and Reviews in University Heights, OH
University Heights, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in University Heights, OH between May 2026 and June 2026.
The most recent job was on June 17, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 155 jobs in University Heights, OH in the last 12 months.
Job Locations and Reviews
Completed routine HVAC heating and cooling maintenance inspection on system equipment. Documented all equipment components including mounting hardware, refrigerant connections with brass fittings, PVC piping, and mechanical support systems, with photographic records taken for service history and future reference.
Completed installation of new air conditioning system. Performed system diagnostics and verified proper operation with temperature readings at 64.6°F, confirming adequate cooling performance and successful installation of all components.
Conducted on-site evaluation of existing residential HVAC system located in basement utility area. Assessed current furnace and air handler configuration, including associated ductwork, refrigerant lines, and PVC drainage/venting systems. Documented equipment conditions and spatial constraints through photographic records. Presented multiple replacement options including standalone AC unit replacement and complete HVAC system upgrade alternatives. Provided detailed estimates for customer consideration and follow-up discussion.
Responded to no cooling complaint on central air system unable to reach setpoint of 68°F and stuck at 76°F. Upon inspection, diagnosed clogged condensate drain line preventing proper system operation. Cleared blockage from drain line using appropriate tools, verified proper drainage flow, and tested system operation to confirm unit now cooling effectively to desired temperature.
Responded to no cooling call and performed system evaluation. Upon inspection, observed existing HVAC system with basement installation showing signs of age and potential efficiency concerns. Evaluated thermostat operation and overall system condition, noting wall discoloration near control unit that may indicate previous moisture issues or equipment cycling problems. Assessed ductwork configuration and equipment placement in basement utility area. Presented customer with replacement options for complete air conditioning system upgrade to restore cooling functionality and improve energy efficiency.
Responded to warranty callback for recently installed central air conditioning system with no cooling condition. Unit was blowing air but failing to achieve setpoint, with indoor temperature reading 6 degrees above thermostat setting. Performed diagnostic evaluation on furnace and air handler assembly to identify root cause of persistent cooling failure following previous service attempt.
# HVAC Cooling Maintenance Summary Completed routine preventive maintenance on a Carrier CNPVP4821ALA4A4A air conditioning unit manufactured in February 2020. System utilizes R-410A refrigerant and operates at 450 PSIG design pressure. Performed comprehensive inspection of outdoor condenser unit, verified all warning and safety labels were intact and legible. Conducted temperature differential measurements across the evaporator coil, recording supply air temperature of 42°F, indicating proper cooling performance. Inspected ductwork installation in mechanical space, confirmed secure mounting and proper insulation. All system components operating within normal parameters with no deficiencies noted.
Completed scheduled cooling system maintenance visit on residential air conditioning unit. Performed comprehensive electrical diagnostics using digital clamp meter, measuring system amperage at 170.0A and capacitance reading of 52.1 μF to verify proper compressor and condenser operation. Customer declined optional electrical inspection services. All equipment operating within normal parameters at time of service.
Completed scheduled preventive maintenance on residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, including evaluation of electrical components, refrigerant levels, and overall system operation. Provided customer education materials regarding blower wheel maintenance, highlighting the importance of regular filter replacement and system upkeep to prevent efficiency loss and potential component failures.
Completed comprehensive cooling system maintenance on residential outdoor condensing unit. Performed electrical diagnostics using digital multimeter to verify proper voltage and amperage readings at capacitor and electrical components. Inspected condenser coil fins, verified proper operation of outdoor unit, and ensured all electrical connections were secure and functioning within manufacturer specifications.
Completed scheduled preventive maintenance on residential split-system air conditioning unit. Performed comprehensive inspection of outdoor condensing unit including electrical connections, contactor operation, and capacitor testing. All components found operating within manufacturer specifications, system cooling properly with no deficiencies noted.
Completed comprehensive cooling system maintenance on residential air conditioning unit. Performed inspection of outdoor condenser unit, including examination of cabinet condition, fan assembly, and electrical components. Verified proper operation of control boards and wiring connections within system housing, confirming all circuit boards functioning correctly and electrical connections secure.
Performed scheduled HVAC cooling system maintenance on residential unit. Inspected electrical connections at control board, verified proper wire terminations and secure mounting of terminal block. Examined blower wheel assembly, noting dust accumulation on fins and end plate but confirming proper mechanical operation and secure mounting hardware.
Performed routine HVAC cooling maintenance on residential system. Conducted electrical diagnostics using digital clamp meter to verify proper amperage draw and voltage levels at the condenser unit. Confirmed thermostat operation and programming settings, ensuring proper communication between control system and cooling equipment.
Completed scheduled preventive maintenance on residential cooling system. Performed comprehensive inspection of outdoor condensing unit, including visual assessment of cabinet condition, coil cleanliness, and overall system operation. Noted weathering and biological growth on exterior surfaces of unit and concrete pad. Verified thermostat operation and temperature settings inside residence, confirming proper communication between control system and cooling equipment. Addressed customer concern regarding non-functional outdoor water hose connection. All routine maintenance protocols executed per manufacturer specifications to ensure optimal system performance and reliability for continued operation.
Completed routine cooling system maintenance and performance verification. Measured supply air temperatures at ductwork and evaporator coil, recording readings of 57.5°F at the main supply duct and 52.8°F at the coil outlet, confirming proper system operation and adequate temperature differential. Inspected internal components including evaporator coil, blower assembly, and refrigerant lines for proper condition and operation.
Completed routine cooling system maintenance on outdoor HVAC unit. Inspected electrical disconnect box, contactor assembly, and all associated wiring connections for proper operation. Noted accumulated debris and corrosion in disconnect enclosure; cleaned accessible components and verified all electrical connections were secure and functioning within specifications.
Responded to service call for thermostat requiring battery replacement. Replaced two AA batteries in Honeywell thermostat unit and verified proper operation upon completion.
Completed scheduled cooling system maintenance visit. Inspected and serviced blower wheel assembly, which showed light dust accumulation but remained in functional condition. Performed standard preventive maintenance procedures on HVAC equipment to ensure optimal system performance for the cooling season.
Responded to service call for furnace inspection preparation. Installed 30-amp Littelfuse in exterior fuse holder assembly to ensure proper electrical protection and code compliance for upcoming inspection.
