Heating, Cooling & Plumbing Services in Aurora, OH

Completed scheduled preventive maintenance visit for residential cooling system. Inspected and serviced HVAC equipment including furnace unit and air handling components. Removed and examined existing pleated air filter, which showed dust accumulation consistent with normal operation. Evaluated circular pleated filter element in air handler, confirming proper installation and clean condition. Verified all system components for proper operation and airflow efficiency to ensure optimal cooling performance for the upcoming season.

# HVAC Cooling Maintenance Summary Completed routine preventive maintenance on residential air conditioning system. Inspected air handler unit, noting 20x25 air filter with moderate dust accumulation requiring replacement. Examined outdoor condensing unit electrical connections at disconnect box, verifying proper terminal connections and copper bus bar integrity. All components operating within normal parameters upon completion of maintenance visit. --- ## Detailed Service Report Performed comprehensive cooling season maintenance on residential HVAC system as part of ongoing preventive maintenance program. **Indoor Unit Service:** Accessed air handler unit and inspected 20x25 pleated air filter mounted in return air plenum. Filter exhibited moderate dust loading consistent with normal usage patterns. Examined ductwork connections and foam insulation seals at panel joints for proper fit and condition. Verified PVC condensate drain line routing and secure mounting. Inspected metal

Completed scheduled cooling system maintenance on Bryant HVAC unit. Performed comprehensive inspection of furnace, ductwork, and associated mechanical components. Verified proper operation of thermostat controls, checked condensate drainage system with PVC piping and valves, and inspected all ductwork connections and insulation for proper sealing. All equipment operating within normal parameters with no issues identified.

Replaced defective circuit breakers in residential electrical panel. Inspected load center, verified proper breaker sizing and compatibility with existing panel configuration, installed new breakers, tested all circuits for proper operation, and confirmed secure connections throughout the panel.

Completed scheduled cooling maintenance on residential HVAC system. Performed comprehensive inspection of outdoor condensing unit, verified refrigerant pressures and superheat/subcooling temperatures using digital manifold gauge, and documented equipment nameplate information including model CAPF1436B6DB. All system parameters measured within normal operating range, and unit is functioning properly for continued cooling season operation.

Completed routine cooling maintenance on residential HVAC system. Inspected outdoor condensing unit electrical components including capacitor and associated wiring connections, verified proper terminal connections and component condition. Performed indoor air handler inspection, checked ductwork connections, and verified system operational status for continued reliable cooling performance.

Responded to no cooling call where system was blowing warm air. Upon arrival, performed diagnostic assessment of outdoor heat pump unit and confirmed system was operational but not cooling properly. Completed troubleshooting procedures and restored cooling function to the system.

# HVAC Cooling Maintenance Summary Completed scheduled preventive maintenance on residential cooling system as part of ongoing service plan. Performed comprehensive inspection of HVAC equipment located in utility room, including evaluation of air handler, ductwork connections, and associated mechanical components. Documented current system conditions through photographic records showing utility room layout with water heater, ductwork configuration, and mechanical equipment positioning. # Detailed Service Description Conducted routine cooling system maintenance visit in residential utility space. Upon arrival, performed visual inspection of the mechanical room to assess overall equipment condition and accessibility. The service area contained standard residential utilities including water heating equipment, plumbing systems, and HVAC ductwork. Inspected metallic ductwork extending from air handler unit, noting galvanized construction with curved elbow joints and proper connection po

Responded to customer report of electrical box failure in kitchen wall. Upon inspection, documented existing electrical panel installation mounted on concrete block wall with visible water damage staining on wooden backing below panel. Panel contains multiple circuit breakers in older-style metal enclosure with gray finish. Photographed additional electrical components including black junction box and yellow connector box mounted on wooden backing, along with associated wiring. Also documented adjacent mechanical systems including water heater and plumbing infrastructure for comprehensive site assessment.

Completed preventive maintenance tune-ups on two HVAC systems. Performed comprehensive inspections of outdoor condenser units and indoor blower assemblies, checking refrigerant lines, electrical connections, and airflow components. Both systems found to be operating within normal parameters with no immediate service needs identified.

Conducted comprehensive evaluation of existing zoned HVAC system to provide furnace replacement options. Documented current system configuration including zone control board with multiple wire connections and main heating unit with associated ductwork and damper components to determine compatibility requirements for new equipment installation.

Completed comprehensive whole home electrical inspection of residential property. Inspection included examination of basement utility areas, electrical panels, water heater connections, exposed wiring, and overall system safety compliance. Documented findings with photographs showing electrical boxes, wire routing in utility spaces, and connections to major appliances including water heating equipment. All accessible circuits, outlets, switches, and electrical infrastructure were visually assessed for code compliance and potential safety hazards.

Completed preventative maintenance on residential forced-air HVAC system. Inspected furnace unit, replaced air filter, verified proper operation of condensate drain lines and venting system, and confirmed all components functioning within normal parameters.

Responded to customer complaint of dragging noise coming from water heater. Conducted on-site inspection of residential gas-fired tank water heater and documented unit condition with photographs. Assessed plumbing connections, gas control valve assembly, and overall system operation to identify source of unusual sound and determine appropriate corrective action.

Completed annual preventative maintenance on residential gas furnace as part of scheduled service plan visit. Upon inspection, verified all burners igniting properly with characteristic blue flame pattern, confirmed proper operation of ignition system and flame sensor, and tested safety controls including pressure switches and limit switches. Examined electrical connections throughout the unit, ensuring all wire terminations were secure and showed no signs of overheating or deterioration. Inspected heat exchanger for cracks or signs of failure, checked blower motor operation and capacitor condition, and verified gas valve functionality. All mechanical and electrical components found to be operating within normal parameters with no immediate service needs identified. Documentation photos captured for service records showing active burner operation and overall system condition.

Completed comprehensive whole-home electrical inspection, evaluating all visible wiring, panels, circuits, and electrical components throughout the property. Inspected unfinished basement area with exposed ceiling joists, documenting multiple cable runs including black flexible conduits and various gauge wiring secured to structural members. Examined exterior electrical service entrance, meter installation, and associated conduit routing on home's exterior wall. Investigated reported doorbell wiring issue allegedly damaged during previous year's installation, tracing circuits and connections to identify any severed or compromised conductors. Documented findings with photographs of electrical infrastructure, including basement utility area framing and exterior service equipment for record-keeping and future reference.

# HVAC Cooling Maintenance Summary Completed scheduled preventive maintenance on residential Trane cooling system. Performed comprehensive inspection of indoor furnace unit and outdoor condensing unit, verifying proper operation of all components. Examined electrical connections at outdoor unit, noting oxidation present on copper terminals which is consistent with normal outdoor exposure. Checked refrigerant lines, condensate drainage, and all mechanical connections. System operating within manufacturer specifications with no immediate service needs identified.

Completed routine preventative maintenance on dual outdoor HVAC cooling units located on exterior gravel pad. Performed comprehensive system inspection including visual assessment of both units, verified proper operation of condenser fans, checked refrigerant line connections and drainage system functionality, and confirmed both systems were operating within normal parameters with no immediate service needs identified.

Completed comprehensive MVP cooling maintenance on three HVAC systems, including two outdoor condensing units and one indoor air handler with associated components. Performed standard maintenance procedures including filter inspection, coil cleaning, refrigerant level verification, electrical connection testing, and condensate drain line evaluation on all three units. Additionally completed MVP maintenance on tanked water heater, inspecting burner assembly, testing temperature and pressure relief valve, checking anode rod condition, and verifying proper combustion and venting.

Completed heating maintenance on a 6-year-old Carrier furnace system. Performed standard maintenance procedures and identified the need for an Aprilaire 2410 media air cleaner to be installed on the system to improve indoor air quality and filtration efficiency.