In Euclid, where summer heat waves and winter chills keep you on your toes, P.K. Wadsworth Heating & Cooling is your reliable partner in maintaining home comfort. A leader in the industry for over 85 years, our team has provided reliable HVAC and water heater services throughout the greater Cleveland area. Whether you need a new heater, an AC tune-up, or water heater repairs, our comprehensive range of services, our experts are here to help.
Bring comfort back into your Euclid home — schedule an HVAC or water heater service with us today.
Superior Cooling Services
Unlike winter, where you can bundle up any time you get cold, escaping the summer heat is a different story if your air conditioner fails. With our cooling services, that’s not something you ever have to worry about again. From professional installation and repairs to routine maintenance, our service a variety of cooling services, including:
- Air conditioning installation, replacement, repair, and maintenance
- Ductless AC replacement, installation, repair, and maintenance
- Heat pump repair, installation, replacement, and maintenance
- Zoned air conditioning
Exceptional Heating Services
When temperatures start hitting below 30 degrees, you’ll want to be sure you have access to reliable heating. If your heating unit is making loud noises, not putting out hot air, or noticing excessive dust around the house, your heater may need professional attention. We’ll get yours back up and running with heating services, including:
Gas, Electric & Oil Furnaces
No matter your preferred fuel source, we also offer furnace services for all types. If you’re looking for a more economical choice, gas furnaces are where it’s at. For more energy efficiency, investigate electric furnaces. If longevity is more your speed, then an oil furnace may be the right choice. Whichever you choose, we have you covered with services, including repair, installation, replacement, and maintenance.
Boilers
Another heating option to consider is a boiler. Boilers are tried-and-true heating systems that come with a variety of unique benefits. One main benefit is that because boilers don’t use forced air to circulate heat, they keep your air free of system-related dust and debris. They also operate quietly compared to other units and can be a highly energy-efficient option. Our boiler services include installation, replacement, repair, and maintenance.
Indoor Air Quality Services in Euclid
Indoor air can be surprisingly polluted, often up to 5 times more than outdoor air. This is due to a buildup of airborne contaminants such as dust, pet dander, cleaning products, allergens, and more. This can lead to respiratory issues, skin irritations, and other health concerns, making it essential to keep indoor air as fresh and clean as possible. We offer a wide range of indoor air quality solutions to do just that.
Plumbing Services in Euclid
Don’t let plumbing problems disrupt your life – PK Wadsworth’s skilled plumbers handle everything from leaky faucets to complete bathroom remodels with honest work and fair prices. As a third-generation family business, we bring decades of local expertise to every job, ensuring your plumbing issues are resolved quickly and correctly. Give us a call at (440) 248-2110 during business hours for clear pricing and reliable service.
- Our Services:
- Drain cleaning
- Pipe repairs
- Water heater repairs and replacements
- Kitchen and bathroom remodeling
- Sump pump installation
- Fixture repairs and updates
- Gas line services
Top-Rated Water Heater Services
Just as you need correctly functioning HVAC systems to keep your home comfortable, water heaters are just as crucial. Without a working water heater, you’d wake up to an ice-cold surprise in the shower. We provide comprehensive water heater services, including tankless water heaters, to ensure you always have access to hot water, no matter how many people might’ve used the shower before you.
Schedule With P.K. Wadsworth Heating & Cooling in Euclid
Dealing with HVAC or water heater problems can be stressful, but you’re in excellent hands with P.K. Wadsworth Heating & Cooling. No more dealing with broken-down water heaters, dust-blowing heating systems, or busted air conditioners. Enjoy the convenience of same-day services, the trustworthiness of trained and certified technicians, and the economic savings of our varied promotions and Preferred Service maintenance plan.
Got a heater, AC, or water heater on the fritz? Schedule a service with the P.K. Wadsworth Heating & Cooling in Euclid today.
Recent Jobs and Reviews in Euclid, OH
Job Locations and Reviews
Completed routine cooling system maintenance inspection. Examined HVAC ductwork, verified proper connections and sealing of all components, and inspected air filtration system with 16x25 filters showing adequate condition for continued operation.
Performed comprehensive HVAC tune-up service on residential split system. Replaced failed dual-run capacitor on outdoor condensing unit and completed full system inspection of gas furnace and air handler, verifying all electrical connections, blower motor operation, and control board functionality to restore proper cooling operation.
Completed annual cooling maintenance on residential HVAC system as part of scheduled preventative maintenance program. Performed standard inspection of outdoor condensing unit, verified proper operation of all components, and ensured system readiness for upcoming cooling season.
Conducted site assessment of existing outdoor AC condenser unit for relocation and reinstallation. Customer requires unit to be temporarily removed and relocated to accommodate concrete pad replacement and re-pouring work. Documented current installation configuration including electrical connections, conduit routing, and positioning against exterior brick wall. Unit is currently mounted on weathered concrete pad with electrical disconnect boxes and conduit properly installed on wall. Provided quote for disconnection, removal, temporary protection during concrete work, and reinstallation of condenser unit once new pad is cured and ready for equipment placement.
Completed full HVAC system installation including 96% high-efficiency furnace, air conditioning unit, and ductwork with insulated liner. System commissioning verified proper airflow with supply air temperature of 43.6°F and return air temperature of 71.2°F, confirming adequate cooling capacity and temperature differential. All components tested and operational, with condensation on evaporator coil indicating normal system function.
Completed furnace replacement estimate for unit with failed heat exchanger that was disabled at thermostat for safety. Documented existing basement utility installation including water heater, electrical panel configuration, and available workspace for equipment replacement. Provided homeowner with furnace replacement options and specifications.
Responded to service call for furnace making loud noises and not operating properly. Upon inspection, found blower wheel heavily contaminated with dust and debris accumulation, causing imbalance and excessive noise during operation. Cleaned blower wheel assembly, removed all dirt and deposits from blades, and verified proper rotation and clearance within housing to restore quiet, efficient operation.
Responded to service call for furnace producing abnormal noise during operation. Upon inspection, found significant dust and debris accumulation throughout the unit and ductwork, consistent with years of deferred maintenance. Performed comprehensive cleaning of furnace cabinet, blower assembly, and accessible ductwork sections. Removed deteriorated insulation material from vent opening and cleared accumulated particulate matter from all mechanical components. Verified proper airflow and system operation following cleaning. Unit operating normally with noise issue resolved. Recommended establishing regular maintenance schedule to prevent future buildup and ensure optimal system performance.
Completed installation of new Goodman 80% efficiency furnace in residential basement mechanical room. Unit installed on concrete pad with proper clearances, connected to existing ductwork system via galvanized metal plenum and distribution network, and tested for proper operation and airflow.
Responded to no-heat call on residential furnace that failed to operate following previous day's service. Upon arrival, performed diagnostic inspection of heating system. Accessed furnace cabinet and examined internal components, wiring connections, and control board assembly. Verified all electrical connections were secure, including wire nut splices and low-voltage wiring to control board. Inspected manufacturer data plate and system specifications. Checked outdoor condensing unit connections and control boards for any issues related to system communication. Identified and resolved issue preventing system operation. Restored power and verified furnace ignition sequence, blower operation, and proper heating cycle. System tested and confirmed operational before departure.
Completed scheduled heating maintenance on Carrier HVAC system, model CNPVP3017ACAABAA, utilizing R-410A refrigerant. Performed comprehensive inspection of air handler unit, including blower motor assembly, heat exchanger components, and evaporator coil. Verified all electrical connections, checked manufacturer specifications against operational parameters, and documented system condition through photographic records. Unit found to be operating within normal parameters with no immediate service requirements identified.
Completed routine heating maintenance on residential Amana furnace system. Performed comprehensive inspection of unit, ductwork, and ventilation components, verifying proper operation of all mechanical and electrical systems. Replaced heavily soiled air filter with new filter, removing significant dirt and debris accumulation that was restricting airflow. Confirmed all duct connections are secure with proper insulation and sealing, condensate drainage system functioning correctly, and exhaust/intake piping properly installed. System tested and operating within manufacturer specifications.
Responded to no heat call on forced air system. Evaluated existing furnace and determined unit required replacement. Provided customer with three gas furnace replacement options ranging from 80% to 96% nominal AFUE efficiency ratings. Documented existing ductwork configuration in basement utility area, including metal supply ductwork with white painted lower enclosure and flexible connector components. Photographed installation area showing exposed brick walls, concrete flooring, and current HVAC infrastructure to support replacement estimate and planning.
Completed scheduled heating maintenance on residential gas furnace system. Performed comprehensive inspection of all major components including blower motor assembly, heat exchanger, gas valve manifold, burner assembly, and control board. Verified proper operation of all electrical connections, tested safety controls, and confirmed system functionality. All components found to be in good working condition with no issues identified.
Performed scheduled heating maintenance on furnace system. Inspected internal wiring connections and sensor installation, noting proper placement of control wires (yellow, red). Examined blower assembly and motor components, verifying all electrical connections were secure and functioning correctly.
Performed scheduled heating maintenance inspection that revealed moisture damage on interior wall surface. Diagnostic testing with moisture meter showed elevated readings of 1.75 in the affected area. System components were examined with special attention to potential condensation or leak sources near the damaged wall section.
Conducted assessment of 17-year-old R22 HVAC system located in basement utility area. System shows significant age-related wear requiring replacement. Provided customer with two quotes: AC options and a full system replacement quote as requested. Equipment inspection revealed outdated furnace with connected ductwork and exhaust components still functional but approaching end of serviceable life.
Performed routine heating system maintenance including filter replacement and combustion analysis. Removed and replaced air filter (16x25) and conducted combustion efficiency testing with Testo analyzer, which showed 12.9% CO2 and 5ppm CO levels, indicating proper system operation.
Responded to no heat complaint on system over 10 years old. Diagnostic testing revealed low gas pressure reading of +7.49" WC on the UEi EM201B meter. Inspected furnace interior components including blower motor, control board, and associated wiring harness, then made necessary pressure adjustments to restore proper heating function.
Responded to no heat complaint where furnace was blowing cold air. Diagnostic inspection revealed severely clogged air filter restricting proper airflow, which was causing system failure. Replaced dirty filter with new one, restoring normal heat operation and improving system efficiency.
