For HVAC in Parma, OH, P.K. Wadsworth Heating, Cooling & Plumbing is the company to trust. We’re also the local service provider to call when you need an electrician or plumber in Parma, OH. Our experts provide the inspection and maintenance services that will give you peace of mind and help lower your costs.
When you need a repair, count on us to deliver it the right way the first time around. Our team can also help you improve your home through new installations and modern, energy-efficient system replacements.
Call P.K. Wadsworth Heating, Cooling & Plumbing with any questions about your plumbing, electrical, or HVAC in Parma.
Why Homeowners in Parma Trust P.K. Wadsworth
We have built our success on a customer-centric approach and stand behind our work with a 100% customer satisfaction guarantee.
Our company also provides written warranties for our installations, repairs, and other services. Those guarantees are in addition to any protection you receive through the manufacturer.
Here are other reasons to choose us when you need a technician, plumber, or electrician in Parma, OH:
- Founded in 1936
- Trusted throughout Greater Cleveland
- Fully licensed & insured
- Licensed, certified electricians, technicians, and plumbers
- A+ BBB accreditation
- Six-time Angi Super Service Award winner
Full-Service Heating and Cooling in Parma, OH
Routine HVAC maintenance is the best way to prevent heating and AC repair in Parma, OH.
It will lower your operating costs, and most HVAC warranties require it. We also recommend proactive diagnostics for your heating and cooling in Parma, OH. A timely response is key to avoiding expensive HVAC repairs and even premature system replacements. For heating and AC repair in Parma, OH, we offer same-day appointments and 24/7 availability for emergencies.
If you have an older HVAC system, it’s an excellent time to consider an upgrade. Modern systems are much more efficient and often make you eligible for rebates and other energy incentives. We install high-SEER ducted and ductless ACs that use significantly less electricity.
If you have a fuel-burning heater, upgrading to a condensing model can lower fuel usage by 10% or more. Our team also installs heat pumps, which provide both heating and cooling. Both standalone and hybrid configurations can dramatically lower your annual HVAC costs.
Our NATE-certified technicians install and service many HVAC systems:
- Ductwork
- Heat pumps
- Ductless mini-splits
- Zone control systems
- Central air conditioners
- Whole-house air purifiers
- Hot water and steam boilers
- Fuel-burning and electric furnaces
- Programmable and smart thermostats
- Whole-house humidifiers and dehumidifiers
Plumbing Repairs and Installations
A common mistake is waiting for a problem to schedule a plumber in Parma, OH. We recommend an annual inspection that lets us identify problems early on. Our team can then perform needed plumbing services that prevent major plumbing problems.
Our team can also help you improve your home through our Parma plumbing services. Water heating accounts for 17% of the annual household’s energy usage. Timely repairs or upgrading to a high-efficiency water heater can make a big difference in your monthly bills. Our team installs and services the sump pumps that help keep many area basements dry. If you suspect a hidden leak, we offer advanced leak detection techniques, including camera inspections, thermal imaging, and acoustic detection. We also perform drain cleaning, trenchless sewer services, and whole-house repiping.
Residential Electrical Services
Don’t wait for a serious home electrical problem to schedule an electrician in Parma, OH. Homeowners should schedule a whole-house electrical inspection at least every few years. You should also schedule if you notice problems, such as high electricity usage, tripped circuit breakers, or warm outlets.
There are many older houses in the region with electrical systems that date back 50 years or more. That’s why it’s common to find panels that provide amp coverage well below what we recommend for the modern home. Even newer homes might not have the whole-house surge protection that’s now code.
An upgrade like this can protect your home against lightning strikes and internal surges, such as from ACs and heat pumps. Our team can also upgrade your electrical outlets with GFCI and AFCI protection. Adding circuits will let you upgrade lighting and outlets without overloading your current system.
Book Trusted Home Services in Parma Today
We’re a family-owned and -operated company that’s served this region for over 85 years. Our approach to customer service and care has earned us over 2,000 five-star Google reviews.
You can count on timely service and upfront pricing without hidden fees and other surprises. We offer a maintenance plan, often have specials available, and provide installation financing on approved credit.
P.K. Wadsworth Heating, Cooling & Plumbing is a local and trusted choice for plumbing, electrical, or HVAC in Parma, OH. Contact us today to schedule an appointment or with any questions about our services and products.
Recent Jobs and Reviews in Parma, OH
Job Locations and Reviews
Responded to emergency no cooling call for central air conditioning system. Upon arrival, discovered severely deteriorated electrical wiring and damaged conduit at exterior disconnect box serving the outdoor condensing unit. Wire insulation had completely disintegrated, exposing internal conductors with evidence of charring and weather damage. Junction box showed signs of corrosion and the electrical connection posed an immediate safety hazard. Documented extensive wire damage with photographs showing compromised insulation, exposed conductors, and deteriorated protective sheathing. Advised customer that the damaged electrical supply wiring required immediate replacement before air conditioning system could be safely restored to operation.
Completed comprehensive cooling system maintenance on Goodman HVAC system. Performed standard preventive maintenance procedures on both indoor furnace unit and outdoor condenser unit, including inspection of all major components, ductwork connections, condensate drainage lines, and heat exchanger coils. System operational and ready for cooling season.
Conducted evening estimate appointment for heat pump replacement on existing aging Rheem system. Evaluated current equipment including vintage Apnliance thermostat and modern Honeywell digital thermostat, as well as outdoor condenser unit. Presented heat pump replacement options and discussed available system promotions with customer.
Performed routine cooling maintenance on residential air conditioning system. Completed standard inspection of outdoor condenser unit, checked electrical components and connections, and verified proper system operation using digital multimeter. Customer requested Aprilaire 413 filter for service.
Completed routine cooling maintenance on residential HVAC system, including inspection of furnace components, blower motor, gas burners, and control mechanisms. Inspected condensate drainage system with red funnel collection point and verified proper operation of PVC discharge piping. Customer requested quote for replacement of existing smart thermostat with standard non-programmable thermostat.
# HVAC Cooling System Maintenance
Completed comprehensive preventive maintenance service on residential split-system air conditioning unit. Performed thorough inspection of outdoor condensing unit, verifying proper operation of compressor and condenser fan motor. Examined indoor air handler components and confirmed airflow through pleated air filter. Inspected electrical connections, refrigerant lines, and condensate drainage system. All equipment operating within normal parameters with no deficiencies noted at time of service.
Completed full HVAC system installation including new outdoor condensing unit and indoor evaporator coil. Installed gray A2L-rated air conditioning condenser on existing concrete pad in residential backyard with proper clearances from structure and property line. Ran electrical conduit along exterior wall to power unit per code requirements. Connected refrigerant lines using brass service valves and properly insulated copper line set to prevent condensation. System charged with R32 refrigerant per manufacturer specifications. Verified all electrical connections secure, tested system operation, and confirmed proper airflow and cooling performance. Installation includes updated A2L safety-compliant equipment with appropriate labeling and documentation.
Completed comprehensive cooling season maintenance on residential HVAC system, including standard inspection of all mechanical components, electrical connections, and refrigerant levels. Performed blower wheel cleaning as previously quoted, removing accumulated dust and debris to restore optimal airflow and system efficiency.
Completed warranty coil replacement on HVAC system. Removed and replaced defective evaporator coil, reconnected refrigerant lines through cabinet penetrations, and sealed all openings with appropriate insulation material. System tested and confirmed operational upon completion.
Conducted comprehensive estimate for complete HVAC system replacement in residential basement mechanical room. Evaluated existing Goodman furnace installation, associated condensate drainage system with PVC piping, electrical service connections, and overall equipment layout to provide customer with full system replacement options including furnace, air conditioning unit, and necessary accessories.
Completed first-year preventative maintenance inspection on residential furnace system as part of annual service plan. Performed comprehensive system evaluation including inspection of gas valve assembly, control board, and low-voltage wiring connections; verified all electrical connections were secure and properly terminated with wire nuts; confirmed gas valve operation and safety switch functionality. All components found in good working order with no issues identified; system operating within normal parameters.
Completed annual preventative maintenance on residential HVAC system including Goodman furnace, air conditioning unit, and tanked water heater as part of scheduled service plan visit. Performed comprehensive multi-point inspection of heating system, verified proper combustion temperatures reaching 332°F, tested all electrical connections and controls, inspected blower motor assembly and ductwork, and confirmed system operation within manufacturer specifications. All equipment found operating safely with no immediate repairs required at time of service.
Completed follow-up system start-up and refrigerant charge verification on newly installed Amana ALXS36DN2410AA air conditioning condenser unit with R-32 refrigerant. Performed operational checks, confirmed electrical specifications at 208/230V single phase with proper circuit protection, and verified system performance as warmer ambient temperatures allowed for accurate refrigerant level assessment as previously scheduled with customer during initial installation.
Conducted estimate for complete HVAC system replacement after outdoor condensing unit sustained physical damage from external impact, resulting in refrigerant loss and compressor failure. Original system was approximately three years old but required full replacement due to extent of damage to outdoor unit and compromised compressor components.
Completed comprehensive heating maintenance on residential HVAC system. Performed diagnostic measurements using clamp meter to verify proper electrical readings and system performance, inspected blower motor assembly and fan operation, and examined air filter condition within the air handler unit. All components found to be operating within normal parameters with no immediate service needs identified.
Performed on-site electrical assessment for standby generator installation. Evaluated existing gas meter location and service entrance configuration to determine optimal generator placement and fuel source connection point. Completed comprehensive load calculation per 2023 NEC Article 220 requirements, analyzing general lighting loads, small appliance circuits, laundry loads, electric cooking equipment, HVAC systems, and motor loads to establish total calculated demand load of 13,878 VA. Determined appropriate generator sizing based on electrical load analysis and documented existing utility infrastructure conditions with photographic records for proposal preparation.
Responded to no hot water call for Whirlpool tanked water heater. Inspected unit and found pilot light was out; successfully relit pilot and confirmed proper flame pattern through viewing window. Tested hot water function and verified system is now operating normally.
Responded to no-heat call for residential system. Diagnosed issue with thermostat wiring, specifically incorrect terminal connections at the UWP16 mounting plate. Rewired thermostat terminals properly, ensuring correct placement of Y, G, C, W, and R connections. Verified system operation after repair, confirming proper heat cycle and communication between thermostat and furnace.
Successfully completed installation of a new Amana furnace and AC system with humidifier and chimney liner. Verified proper electrical connections with appropriate 30A Littelfuse fuses in the fuse block. System was installed with proper ductwork, exhaust venting, and drainage components according to manufacturer specifications.
Performed scheduled heating maintenance service on residential furnace. Inspected blower motor assembly, electrical connections, and gas supply components, confirming all systems are operational with no visible damage or abnormal wear. Verified proper function of circuit board and wiring connections throughout the unit.
