Solon covers a wide stretch of southeast Cuyahoga County, from SOM Center Road and Aurora Road down toward Cannon Road, Pettibone Road, and the neighborhoods surrounding Solon Community Park and Grantwood Golf Course. With more than 23,000 residents and a large number of homes built between the 1960s and early 2000s, P.K. Wadsworth Heating & Cooling provides service throughout Solon for aging furnaces, electrical upgrades, plumbing repairs, and uneven comfort issues.
Homes near Liberty Road, Bainbridge Road, and the newer developments off US-422 may have systems that have been expanded, updated, or pushed harder than they were originally designed for. If your heating, cooling, plumbing, or electrical system has started causing problems, call (440) 588-3025 or contact P.K. Wadsworth online to schedule service in Solon.
Why Choose P.K. Wadsworth in Solon
P.K. Wadsworth has been serving Northeast Ohio homeowners for decades, and Solon is one of the communities we serve. We service homes near Solon High School, the industrial corridor off Cochran Road, and established neighborhoods where original equipment is now reaching the end of its lifespan.
Renovations to Solon homes can include kitchens, finished basements, home offices, and additions. That can mean HVAC systems, plumbing lines, and electrical panels are carrying more demand today than they were when the home was first built. Our technicians consider the layouts, construction styles, and repair issues in Solon homes.
Heating & Furnace Repair in Solon, OH
A winter heating concern in Solon can start with someone noticing that the furnace never actually shuts off once temperatures drop. In neighborhoods near Hawthorne Valley Country Club, Liberty Hills, and the older subdivisions surrounding SOM Center Road, a system may be heating additions, remodeled lower levels, and larger family rooms that were added years after the original furnace was installed.
Some homes may still have equipment dating to the 1970s, 80s, and 90s. Others have newer furnaces connected to older duct systems that were never redesigned to handle modern airflow demands. That combination can leave upstairs bedrooms colder than the rest of the house while the furnace runs longer than it should.
P.K. Wadsworth provides heating solutions throughout Solon, including:
Air Conditioning & Cooling Services in Solon, OH
Cooling problems in Solon may not affect the entire house equally. Homes near Miles Road, Richmond Road, and the neighborhoods surrounding Solon Community Park may have upstairs rooms becoming uncomfortable by mid-afternoon even though the thermostat downstairs says the house is cooling normally.
The issue can involve airflow distribution, insulation differences between levels, or older systems trying to cool square footage that has expanded over time. Larger two-story homes and properties with vaulted ceilings near US-422 can expose those problems once Northeast Ohio humidity settles in during July and August.
Cooling services available throughout Solon include:
Plumbing & Water Heater Services in Solon, OH
Plumbing issues in Solon can begin as smaller problems people try to work around for a while. Maybe the water heater takes longer to recover in the morning, a basement drain starts backing up during storms, or a sump pump suddenly sounds louder than normal after heavy rain.
Homes near Pettibone Road, Cannon Road, and areas closer to the Chagrin River watershed may depend on sump pump systems to help protect lower levels. Once groundwater starts building up during extended rain, weak sump systems become noticeable very quickly.
P.K. Wadsworth provides plumbing services throughout Solon, including:
Electrical Repair & Upgrades in Solon, OH
Electrical systems in Solon may be handling more demand today than they were originally designed for. Homes near Signature of Solon Country Club, Cannon Road, and newer developments off Aurora Road may support EV chargers, backup generators, larger kitchen appliances, home office equipment, and finished entertainment spaces at the same time.
In older sections of Solon, a panel that was adequate decades ago may now be operating near capacity because the home has gradually expanded around it. Flickering lights, overloaded breakers, and inconsistent power can start appearing after another renovation or appliance upgrade gets added to the system.
Electrical services we provide throughout Solon include:
Indoor Air Quality Solutions for Solon Homes
In some Solon homes, the house never quite feels comfortable even when the temperature setting looks correct. The air feels dry during winter, heavy during humid stretches, or dusty in certain rooms no matter how often filters get changed.
That can happen in larger homes near Liberty Road and newer construction surrounding US-422 where tighter construction keeps conditioned air inside but can also limit ventilation.
P.K. Wadsworth installs and services:
P.K. Wadsworth Service for Solon Homeowners
P.K. Wadsworth provides service in Solon, with a focus on arriving prepared, explaining problems clearly, and respecting the home while we work. Call to discuss your service needs and current appointment availability.
Our service approach includes:
- Experienced HVAC, plumbing, and electrical technicians
- Scheduling based on current availability
- Clear repair recommendations without pressure
- Financing options on qualifying systems
- Respectful service and clean job sites
- Ongoing maintenance plans for long-term system care
From older homes near downtown Solon to newer developments expanding farther south toward Aurora, homeowners may want honest answers about whether something can still be repaired or whether replacement actually makes sense. Our technicians can help you weigh those options.
Schedule Service in Solon
Whether you are dealing with an aging furnace, a failing water heater, electrical upgrades, or cooling problems that keep coming back every summer, P.K. Wadsworth is ready to help. Our technicians provide service throughout Solon, taking the home’s layout and existing systems into account.
Call (440) 588-3025 or contact P.K. Wadsworth online today to schedule heating, cooling, plumbing, or electrical service in Solon, OH 44139.
Recent Jobs and Reviews in Solon, OH
Solon, OH at a glance
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 20 jobs in Solon, OH in November 2026.
The most recent job was on November 17, 2026.
P.K. Wadsworth Heating, Cooling, Plumbing and Electric has completed 1,129 jobs in Solon, OH in the last 12 months.
Job Locations and Reviews
Responded to a furnace short-cycling complaint (burners shutting off after approximately five minutes and failing to hold setpoint) and inspected the A/C evaporator coil cabinet connection at the furnace outlet for misalignment or airflow restriction. Measured furnace temperature rise with the heat running and verified burner, gas valve, and blower compartment conditions to evaluate the system for a high-limit trip caused by restricted airflow.
Responded to a no-heat call on an approximately 3-year-old Goodman furnace, with a fault code indicating a possible sensor issue. Inspected the furnace cabinet and internal wiring and tested the unit with a clamp meter to diagnose the safety circuit, with the pressure/drain switch assembly removed for evaluation. Inspected the exterior condensate and vent piping, and the unit is ready for follow-up service to restore heat.
Completed electrical installation and final connections for a 22kW Generac standby generator, including routing of flexible conduit and conductors from the unit through a PVC access fitting along the exterior wall. Installed and secured the gas supply line with a manual shutoff ball valve at the generator, supported by a mounting post, and verified all connections and components were properly secured with the unit housing and panel accessible for commissioning.
Cleaned out the heat exchanger chambers, removing heavy soot, carbon buildup, and debris from the fin surfaces and flue passages that were restricting airflow and heat transfer. Restoring clean passages improves combustion efficiency and venting performance, and corrosion on the burner assembly components should be monitored during future maintenance visits.
Performed seasonal heating maintenance on a 10+ year old furnace, including removal and inspection of the flame sensor, which showed oxidation and carbon residue affecting flame rectification reliability. Inspected the blower assembly and found significant dust and debris buildup on the squirrel-cage blower wheel, which can reduce airflow and system efficiency. The system was serviced to restore proper operation and ensure safe, reliable heating performance.
Responded to a noise complaint on the garage-installed gas furnace following a recent maintenance visit. Inspected the furnace, Honeywell control components, and plenum connections, and noted rust staining on the closet floor near the base of the unit. Diagnosed and addressed the source of the noise to restore normal furnace operation.
Performed a heating tune-up on the gas furnace, including inspection of the inducer motor assembly, gas valve and piping connections, venting, PVC condensate and intake lines, and control board wiring. Measured electrical readings with a clamp meter to verify proper component operation, and found no visible corrosion, rust, or damage. Furnace operating within normal parameters at completion.
Performed an on-site evaluation for a full forced-air system replacement and prepared two complete replacement options. Documented existing equipment, including a General 1042-L power humidifier mounted on the supply duct and a battery-powered Robertshaw non-programmable thermostat, to ensure compatibility and proper sizing for the new system.
Performed a blower wheel wash on the gas furnace, removing accumulated dust and debris from the blower wheel to restore proper airflow and system efficiency. Verified normal furnace operation after reassembly, confirming stable burner flame, proper inducer function, and control board status.
Performed an on-site evaluation for installing a service disconnect between the main breaker box and the sub panel, inspecting the existing load center, its breaker configuration, and the surrounding cable routing and clearances. Documented panel conditions, including the aged labeling, a generator-designated breaker, and nearby plumbing and metering components, to determine proper placement and code-compliant working space for the new disconnect.
Performed seasonal heating system maintenance, including a combustion analysis with a Testo 310 analyzer that recorded 15.3% O₂ and 17 ppm CO in the flue gases. Verified electrical operation by measuring component amperage and voltage with a True RMS clamp meter at the equipment cabinet, and the system was found operating within normal parameters.
Performed a heating-season tune-up on the furnace/air handler, including combustion analysis with a Testo 310 analyzer to verify burner operation and flue gas performance. Inspected the blower motor and cabinet interior, which were clean and intact with no signs of rust, corrosion, or damage, and checked the pleated air filter and surrounding plenum area. Unit was found operating properly at completion of service.
Responded to a no-heat call on an 11-year-old furnace that failed to respond to a heat demand, with no blower operation or ignition sequence. Performed diagnostic inspection with a borescope, which revealed heavy frost and ice accumulation on the interior surfaces and around the opening, along with rust-colored corrosion and buildup at the drain/condensate area, indicating a condensate drainage and moisture-related fault affecting furnace operation. Findings were documented with inspection-camera photos, and the system condition was evaluated for corrective action.
Performed an on-site estimate for replacement of the furnace and air conditioning system. Inspected the existing outdoor condenser, noting weathered casing with algae/mildew staining, heavy leaf debris around the base, an algae-stained insulated refrigerant line, and a rusted exterior electrical disconnect. Verified the 200A main electrical panel, which shows dedicated 40-amp double-pole breakers for the AC with a labeled circuit directory and no visible damage or corrosion, confirming adequate electrical capacity for the new equipment.
Performed scheduled heating maintenance on the furnace, inspecting the blower motor, transformer, control board, wiring connections, and internal cabinet components. Observed minor surface rust on an interior cabinet panel, with no significant corrosion, frost, or component damage noted; system operation was verified and the unit left in working condition.
Performed a heating tune-up on two gas furnaces, including inspection of the cabinet interiors, wiring, pressure switches, inducer motor assembly, and gas valve. Used a digital clamp meter to measure amp draw on the electrical components and verify proper operation. No damage, rust, or frost was observed; only light dust and general wear were noted, and both systems were left operating normally.
Replaced the failed inducer motor assembly and dual pressure switch on the gas furnace, installing a new gasket and reconnecting the wiring and pressure sensing tubing. Verified proper draft and pressure switch operation with a digital manometer before reassembling the unit.
Installed and routed PVC condensate/drain piping from the water heater to the basement floor drain, cutting and fitting pipe sections with a ratcheting cutter and terminating with an elbow fitting above the drain for proper discharge. Secured the run along the wall and completed connections at the drain, leaving the unit's piping and connections ready for operation.
Performed scheduled preventive maintenance on a standby generator, including engine oil and oil filter replacement, spark plug replacement, and air filter replacement. Inspected the service compartment, hoses, clamps, and wiring harness, finding no visible leaks, corrosion, or damage, and confirmed the unit was left in clean, serviceable condition.
Inspected the Kohler two-piece toilet for a reported flushing malfunction and found the tank flush valve and flapper assembly in need of service, with rust and mineral staining present on the tank floor. Serviced the flushing mechanism, including the flapper, fill valve, and flush lever connection, and restored proper flush operation.


