HVAC & Plumbing Services in Cleveland, OH

Completed non-member heating tune-up service on residential HVAC system. Performed standard seasonal maintenance inspection of heating equipment, including examination of electrical control panel components, wiring connections, and safety controls. Replaced heavily soiled air filter that showed significant accumulation of dust and debris throughout pleated media, which was restricting proper airflow to the system.

Responded to failed inspection for HVAC installation. Documented abandoned inlet openings and PVC vent pipe terminations extending through exterior siding that require correction to meet code requirements. Photographed exterior vent configuration and interior attic space showing connector and insulation conditions for compliance verification and correction planning.

# HVAC Cooling Maintenance Service Performed routine preventive maintenance on residential cooling system. Inspected and tested dual-run capacitor (40+5 µF, 450VAC, model CBB65A) using digital multimeter to verify proper capacitance values and electrical performance. All electrical connections were secure, and capacitor readings were within manufacturer specifications. System operational and functioning properly upon completion of maintenance inspection.

Completed comprehensive heating system tune-up and inspection. Performed thorough assessment of heat exchanger, which showed significant dust and debris accumulation on the radial fin assembly requiring attention for optimal heat transfer efficiency. Verified system operation with temperature readings at 142.1°F, confirming proper heating function within normal operating parameters.

Conducted residential site evaluation for air conditioning system replacement. Assessed existing aging condenser unit showing significant weathering and debris accumulation, documented current electrical service panel configuration, and reviewed installation requirements for upgraded HVAC equipment to provide customer with replacement options.

Completed scheduled cooling maintenance on HVAC system, including inspection of air handler components, refrigerant lines, and condensate drain assembly with float switch mechanism. Performed diagnostic measurements using digital testing equipment and verified proper operation of all mechanical components, piping connections, and safety controls.

Completed comprehensive cooling system tune-up on residential Carrier HVAC system. Performed standard maintenance procedures including inspection of furnace and air handler units, verification of refrigerant line connections, examination of condensate drain system, and assessment of electrical components. Notable finding: motor terminal block exhibits significant dirt accumulation, corrosion, and debris requiring attention during future service to prevent potential electrical issues.

Conducted comprehensive electrical system assessment for grounding outlet installation estimate. Evaluated existing service entrance equipment, including exterior meter base and weatherhead configuration, and inspected main electrical panel to determine current circuit capacity and available spaces for potential GFCI or grounded circuit additions. Documented existing panel configuration with handwritten circuit labels identifying major appliances including A/C, dryer, range, and furnace circuits to assess compatibility with proposed grounding upgrades.

Completed routine cooling maintenance visit on residential HVAC system. Inspected furnace unit and air handler assembly, verified proper operation of condensate drain system with collection funnel and PVC piping configuration, and replaced air filter with new pleated unit. All components operating within normal parameters with no deficiencies noted.

Responded to service call for two non-operational AC units at duplex property. First unit presented with humming noise but no cooling operation; diagnosed failed compressor capacitor and replaced with appropriate rated component, restoring normal function. Second unit at adjacent duplex showed no power; identified tripped breaker at electrical panel, reset breaker, and verified proper startup sequence and cooling operation. Cleared debris from both condenser units and confirmed adequate airflow through coils.

Completed electrical estimate for smoke and carbon monoxide detector replacement at residential property. Assessed existing ceiling-mounted detectors and provided pricing for updated safety devices per customer request.

Completed heating tune-up and safety inspection on rental property HVAC system. Inspected blower motor assembly and electrical connections, confirming proper operation and secure wiring. Replaced heavily soiled air filter that showed significant dust and debris accumulation, which was restricting airflow and reducing system efficiency. Documented all work performed with photos and provided detailed checklist to property owner via email as requested.

Completed installation of new air conditioning system. Unit was set on concrete pad with proper gravel landscaping base. Connected refrigerant lines with brass service valves and verified all copper piping connections were secure. Installed condensate drain line using PVC piping. Performed system startup and tested operation. Measured and verified supply air temperature at 75.5°F using calibrated digital thermometer, confirming proper cooling performance. All components functioning within manufacturer specifications.

Completed warranty service on HVAC installation in mechanical room. Secured MC cable to copper piping per code requirements and relocated low voltage wiring away from gas line to ensure proper clearance and safety compliance. All electrical connections verified and system operational upon completion.

Completed scheduled preventive maintenance on residential cooling system. Performed comprehensive inspection of air handler components including blower motor assembly, squirrel cage fan, and internal ductwork. Verified proper operation of blower motor, checked electrical connections, and confirmed all components were clean and functioning within normal parameters.

Conducted comprehensive whole-home plumbing inspection of residential property, evaluating all accessible plumbing systems, fixtures, and infrastructure. Documented conditions of basement mechanical systems including water heater, supply lines, drainage systems, and exposed piping along deteriorated masonry walls, noting areas requiring maintenance or potential repair to ensure continued system reliability and code compliance.

Responded to no cooling complaint on residential air conditioning system. Upon arrival, connected manifold gauges to assess refrigerant pressures and system operation. Diagnostic testing revealed abnormal pressure readings indicating potential refrigerant charge issue or system malfunction. Inspected outdoor condensing unit and noted significant rust and corrosion on fan guard, suggesting extended exposure to weather elements and potential maintenance concerns. Documented system pressures using calibrated gauges compatible with multiple refrigerant types including R-22 and R-410A. Performed visual inspection of copper coil assembly showing normal weathering patterns consistent with outdoor installation. System evaluation completed with photographic documentation of pressure readings and equipment condition for service records.

Completed routine cooling system maintenance visit on residential air conditioning unit. Performed comprehensive inspection of outdoor condensing unit, including examination of electrical components, capacitor, contactor, and associated wiring connections. Inspected indoor air handler, verifying blower motor operation and checking air filter condition. All electrical connections were secure, capacitor tested within normal specifications, and system components found to be operating properly with no deficiencies noted.

Completed HVAC estimate for full system replacement including indoor furnace unit located in basement utility area and outdoor condenser unit positioned on concrete pad along exterior fence line. Customer requested expedited installation timeline for replacement of existing heating and cooling equipment.

Completed scheduled preventive maintenance on residential cooling system. Performed comprehensive inspection of furnace and air handling unit, verified proper operation of PREME air quality monitoring device mounted on ductwork, and confirmed all system components functioning within normal parameters.