HVAC & Air Quality Services in Shaker Heights, OH

Performed routine maintenance flush on Bradford White Defender Safety System tanked water heater. Drained sediment from tank bottom via drain valve, inspected all connections and valves for proper operation, and verified gas line shut-off valves and plumbing connections remained secure and leak-free throughout the procedure.

Completed scheduled maintenance on Bradford White tanked water heater, performing a comprehensive flush and fill procedure to remove sediment buildup and ensure optimal performance. All plumbing connections, pressure relief valve, and gas control components were inspected and found to be in proper working condition. Unit was refilled and returned to normal operation as part of ongoing preventive maintenance program.

Installed customer-supplied toilet in residential bathroom featuring pink tile flooring and botanical wallpaper. Removed existing fixture, set new two-piece white toilet with chrome flush handle, ensuring proper seal and connection to existing plumbing. Verified proper operation and confirmed no leaks upon completion.

Completed scheduled preventive maintenance on residential cooling system as part of ongoing service agreement. Inspected outdoor condensing unit, which showed signs of vegetation overgrowth around equipment requiring clearance attention. Replaced dirty air filter that had accumulated significant dust and debris, ensuring proper airflow and system efficiency. Verified refrigerant lines, electrical connections, and disconnect box for proper operation. System tested and operating within normal parameters upon completion.

# Partial Rewire - 200 Amp Service Upgrade Completed a comprehensive partial rewire with 200 amp service upgrade involving replacement and installation of two electrical panels. The interior panel was surface-mounted on wooden backing in the basement utility area, featuring dual circuit breaker arrays with proper color-coded wiring (red, black, white) connected to main bus bars. Three large main power feed cables were terminated at the top of the panel with appropriate connectors. The exterior panel was mounted on the building's vinyl siding and included a main disconnect switch at the top with dual feed cables entering through the enclosure. Below the disconnect, installed a full complement of circuit breakers arranged in standard residential configuration. Multiple branch circuits were connected using properly sized conductors in various colors including red, black, white, yellow, and green wiring. Gray PVC conduit entries were installed at the bottom of the exterior panel for prot

Responded to no-cooling complaint for Fujitsu Halcyon mini-split system installed in garage. Upon arrival, found outdoor condenser unit in good physical condition with no visible damage to exterior components or coil fins. Indoor air handler was operational but not providing adequate cooling to space. Performed diagnostic evaluation of system, checked refrigerant levels, electrical connections, and thermostat settings to identify cause of cooling failure and restore proper operation to the unit.

Performed comprehensive cooling system maintenance on residential HVAC unit. Inspected electrical connections at terminal block, verifying all wire terminations were secure and properly torqued. Examined refrigerant line insulation for integrity and signs of wear. Replaced air filter and confirmed proper fitment within air handler compartment. All electrical components showed normal operating condition with connections properly secured and organized. System operational and ready for cooling season.

Completed scheduled HVAC cooling maintenance service with customer available at 11 AM. Performed comprehensive system inspection including blower assembly examination, verified proper operation of squirrel cage fan and blower wheel components, and documented equipment condition through photographic records for service history.

Performed comprehensive heating maintenance on two HVAC systems, including inspection of wall-mounted heating unit and boiler equipment. Documented corrosion observed on boiler glass and assessed overall system condition, with all findings photographed for service records.

Completed annual preventative maintenance on ductless split heat pump system as part of routine service program. Inspected flame sensor and ignition components, finding normal dust accumulation consistent with system age; verified proper operation of heating elements and control panel indicators. Assessed associated piping and connections, noting surface oxidation on black iron piping that does not affect system performance, and confirmed all mechanical components, brackets, and mounting assemblies are secure and functioning within manufacturer specifications.

Completed full HVAC system installation including new air conditioning condenser unit, air scrubber, humidifier, and return drop. Condenser unit was positioned on composite pad against exterior wall with proper clearance for airflow and maintenance access. Installed weatherproof electrical disconnect box on exterior siding with conduit connections to unit. Ran and insulated refrigerant lines from condenser to indoor air handler. System was charged, tested, and verified operational. Installation financed through Greensky.

Performed routine HVAC heating system maintenance on one of two systems present at the property. Inspected air handling unit, verified proper filter installation and condition, and documented equipment status including Lochinvar water heating equipment and associated mechanical components. All accessible system components were checked and found to be operating within normal parameters at time of service.

Performed routine maintenance on tanked water heater system, including complete flush to remove sediment buildup and ensure optimal performance. Inspected all plumbing connections, expansion tank, pressure relief valve, and associated copper piping; all components found in proper working condition with no signs of corrosion or leaks.

Provided plumbing estimate for replacing flexible drain assemblies with solid PVC drain lines and P-traps in three bathroom locations: master bath, first floor bath, and second floor bath. Estimate included sealing an access hole in the second floor bathroom using expanding foam insulation, and replacing a wye drain fitting under the stairs with solid pipe configuration. Documented existing plumbing conditions showing current flexible drain connections and PVC drainage assemblies secured with hose clamps.

Performed routine maintenance on tanked water heater including complete system flush. Upon inspection, discovered significant sediment accumulation at tank bottom, which was successfully removed during drain and flush procedure. Unit exterior showed advanced corrosion and rust deterioration on metal surfaces, indicating age-related wear. Flushed system until water ran clear, removing mineral deposits and debris to restore optimal heating efficiency and extend equipment lifespan.

Completed installation of new Amana 96% AFUE high-efficiency gas furnace in basement utility area. System includes PVC venting routed through existing ductwork connections, gas piping with black iron threaded fittings, and unit mounted on concrete pad with proper clearances maintained. All connections tested and operational, with furnace commissioned and verified for proper heating cycle operation.

Returned to property to address persistent lavatory drain obstruction. Successfully snaked the bathroom sink drain line to restore proper drainage and water flow.

Completed first-year heating maintenance on Amana heat pump system as part of MVP preventive maintenance program. Performed comprehensive inspection of outdoor condenser unit and indoor air handler components, verified refrigerant lines and electrical connections, checked humidification system operation, and documented equipment condition through photographic records. All system components found operating within manufacturer specifications with no deficiencies noted.

# HVAC No Heat Emergency Service Responded to emergency no heat call for 4-year-old gas furnace system located in basement. Upon arrival, conducted comprehensive diagnostic evaluation of heating system components and electrical controls. ## Diagnostic Findings Performed systematic troubleshooting of furnace operation, including inspection of ignition sequence, gas valve function, and control board signals. Tested all safety switches and limit controls to verify proper operation. Checked thermostat communication and confirmed call for heat signal was reaching the unit. ## Electrical System Inspection Conducted detailed examination of electrical control assembly and wiring connections. Inspected contactor/relay component for proper operation and verified all terminal connections were secure. Tested capacitor for correct microfarad rating and voltage specifications. Evaluated condition of all wire connections at terminal blocks, ensuring tight and proper contact. Checked for any sign

Responded to customer complaint of low water pressure affecting multiple faucets throughout the home. Upon investigation, discovered significant corrosion and mineral buildup in the main water supply lines located in the basement utility area. Identified rust-colored staining and oxidation on metal pipes and fittings, indicating advanced deterioration of the plumbing system. Documented corroded piping with visible scale accumulation and discolored water present in collection bucket, confirming sediment contamination in the water supply. Assessed blue-handled ball valve and surrounding pipe connections showing signs of aging and potential flow restriction. Exterior inspection revealed moisture intrusion at foundation level with algae growth on brick surfaces, suggesting possible water supply line issues contributing to pressure problems. Photographed affected areas for documentation and recommended comprehensive evaluation of water supply system to address corrosion-related flow restric