HVAC & Air Quality Services in Shaker Heights, OH

# HVAC Boiler Maintenance and Inspection Completed comprehensive tune-up and maintenance service on boiler system over 10 years old with reported noise concerns. Upon arrival, performed thorough visual inspection revealing significant dust and debris accumulation throughout heat exchanger sections and extensive cobweb buildup on system components. Noted heavy corrosion on multiple pipe connections and gauge fittings, indicating age-related deterioration consistent with equipment age. Cleaned heat exchanger surfaces, removing accumulated dirt and debris from metal slats and channels to restore proper heat transfer efficiency. Inspected burner assembly and combustion chamber for proper operation. Tested all safety controls including pressure gauge and electrical connections housed in junction box. Verified proper operation of flexible conduit electrical connections and confirmed secure mounting of all components. Addressed noise complaint by examining all mechanical connections and id

Completed routine maintenance on residential tanked water heater, including full system flush to remove sediment buildup and inspection of all components. Verified proper operation of Honeywell gas control valve, tested temperature and pressure relief valve functionality, and confirmed expansion tank pressure and all copper piping connections were secure with no visible leaks.

Completed comprehensive heating maintenance on two HVAC systems, including inspection of air handler units, ductwork, and electrical control components. Performed thorough examination of refrigerant lines, condensate drainage system, transformer connections, and control wiring, noting evidence of previous moisture accumulation on equipment platform. All systems tested and verified operational with proper electrical connections and secure component mounting.

# HVAC Heating Maintenance - Dual System Service Performed scheduled heating maintenance on two Amana furnace units installed in residential basement mechanical room. Upon inspection, discovered severe frost and ice buildup on evaporator coil of one system, indicating critical airflow restriction or refrigerant issue requiring immediate attention. Documented condition of both heating systems through photographic evidence showing the extensively frosted coil with uniform crystalline accumulation across all fins, as well as overall dual furnace installation with PVC venting configuration. The ice buildup condition suggests potential low refrigerant charge, restricted airflow due to dirty filter or blocked return, or malfunctioning blower motor requiring further diagnostic evaluation and corrective action to restore proper system operation and prevent compressor damage.

Completed full HVAC system installation including 80% efficiency furnace, air conditioning unit, and ductwork liner. Verified proper electrical connections with 30-amp FLNR fuses installed on disconnect assembly. Confirmed system operation with supply air temperature reading of 69.4°F at startup, indicating proper cooling performance and airflow distribution.

Completed full HVAC system replacement in basement mechanical room with straightforward access. Installed new furnace/air handler unit with associated white PVC ductwork properly secured to ceiling joists, ensuring proper ventilation and system operation. All equipment tested and verified functioning to manufacturer specifications.

Responded to service call for non-functioning water heater with no hot water production and suspected water leak. Upon inspection, examined internal components including sight glass and electrical connections, and assessed overall condition of tanked water heater unit showing age-related wear with rust staining on piping and connections. Documented equipment condition and identified issues affecting hot water system performance.

Completed comprehensive boiler maintenance inspection and documentation. Examined and photographed key system components including Honeywell control unit, water level indicators, supply and return piping, isolation valves, and associated mechanical connections. Documented significant corrosion present on vertical drainage piping and coupling joints, noting heavy rust accumulation and mineral deposits that may require future attention to prevent system integrity issues.

Responded to service call for ice damage assessment on outdoor condensing unit. Upon arrival, inspected condenser unit for structural and mechanical damage resulting from ice impact. Conducted thorough visual examination of cabinet panels, fan grille assembly, and internal components. Photographed damaged areas and overall unit condition for insurance documentation purposes. Discussed repair versus replacement options with customer based on extent of damage observed. Unit remains operational but sustained cosmetic damage to exterior casing and potential concern for internal component integrity that may require further evaluation by insurance adjuster.

Conducted comprehensive site assessment for full HVAC system replacement at residential property with rooftop unit configuration. Evaluated existing mechanical equipment in basement utility area, including water heater, furnace connections, and associated plumbing infrastructure. Documented current system layout featuring exposed brick wall-mounted components, copper piping configurations, gas lines, and electrical panels. Assessed rooftop unit accessibility via walk-out access point, confirming straightforward installation conditions. Provided customer with multiple full system replacement options based on existing equipment age, current configuration, and ease of access for equipment changeout.

Performed comprehensive heating maintenance on HVAC system over 10 years old. Conducted thorough inspection of blower assembly, verifying proper operation of centrifugal fan wheel and motor components. Performed combustion analysis and safety testing using calibrated digital instrumentation, confirming system operating within manufacturer specifications with readings of 115 and 531 recorded. Inspected all mechanical components for wear, checked blower wheel for balance and debris accumulation, and verified proper airflow through the system. All safety parameters verified and unit returned to normal operation.

Performed routine preventative maintenance on Weil-McLain boiler system in basement mechanical room. Conducted thorough inspection of boiler components, burner assembly, gas connections, electrical wiring, and associated piping systems including expansion tank and circulation components. Cleaned and serviced internal mechanisms with unit access panel removed for complete system evaluation. All equipment found operating within normal parameters with no immediate repairs required.

Completed comprehensive plumbing inspection of water heater installation and associated fixtures. Documented existing conditions including corroded shutoff valves, aged metal components with significant oxidation, P-trap configuration beneath water heater with staining at PVC joints, and deteriorated valve assemblies requiring future attention for proper system maintenance.

Completed scheduled preventative maintenance on Carrier cooling system per service plan agreement. Performed comprehensive inspection of air handler unit, verified proper operation of electronic control module and circuit board, checked electrical connections and wiring integrity, and inspected ductwork including flexible ducting and metal transitions. All components found operating within normal parameters with no deficiencies noted.

Completed first-year preventive maintenance on residential hydronic boiler system. Performed comprehensive inspection of boiler unit, circulator pumps, expansion tank, copper piping, brass fittings, and all associated plumbing components. Verified proper operation of zone valves, checked system pressurization, inspected all connections for leaks, and confirmed adequate water flow throughout the heating system. All equipment found operating within normal parameters with no immediate concerns identified.

Completed heating tune-up for new homeowner, performing comprehensive system inspection and combustion analysis on natural gas furnace. Verified proper combustion efficiency with oxygen levels at 7.9%, carbon monoxide readings at 32 PPM, and stack temperature at 350°F, all within acceptable parameters. Documented all equipment specifications and serial numbers for maintenance tracking program enrollment.

Completed routine heating maintenance on boiler system and inspected all operational components. Identified and documented issue with automatic water feeder not activating properly, which will require further attention to prevent low water conditions and potential system damage.

Eliminated prohibited saddle valve connection on humidifier water supply line and replaced with code-compliant plumbing installation. Removed non-approved joints and fittings, ensuring all connections meet current mechanical code requirements. Documented all modifications with photographs showing exterior drainage components and foundation area where work was performed.

Completed comprehensive HVAC system installation including steam-to-hot water boiler conversion with new piping infrastructure, Unico air handler with ductwork installed in attic space, hot water heating loop with panel radiators, and mini split system. All mechanical systems commissioned and operational with copper supply lines properly connected throughout residence.

Completed installation of new air conditioning system and evaporator coil at residential property. System included ALXS3BN3010 unit with exterior condenser placement on side of building, proper electrical connections via conduit and dedicated disconnect box mounted to vinyl siding, and refrigerant line set routing along exterior wall foundation. All components tested and operational upon completion.