HVAC & Air Quality Services in Shaker Heights, OH

Responded to service call for newly installed Daikin ductless mini-split system experiencing electrical breaker issues. Upon inspection of the electrical panel, identified improper circuit configuration where the mini-split unit and kitchen stove appeared to be sharing the same breaker, contrary to proper labeling and electrical code requirements. Documented panel wiring configuration and mini-split installation location for further electrical remediation and circuit separation.

Responded to ceiling leak caused by leaking pipes in residential bathroom. Upon inspection, identified source of water intrusion affecting ceiling below bathroom fixtures. Completed necessary repairs to stop active leak and prevent further water damage to structure.

Performed on-site assessment for boiler replacement on existing GWA 052N-S unit experiencing chronic pilot assembly corrosion. Inspected current hydronic heating system including Amtrol Extrol expansion tank, copper distribution piping, and associated mechanical components. Documented existing equipment configuration and provided replacement options to address ongoing pilot metal lead rust failure affecting system reliability.

# HVAC Cooling Maintenance Summary Completed scheduled preventive maintenance on outdoor AC unit. Performed comprehensive system diagnostics using CoreSense compressor monitoring equipment and Fieldpiece SMAN digital manifold gauges to assess refrigerant pressures, superheat, and subcool temperatures, confirming all operating parameters within manufacturer specifications. # Detailed Work Performed Conducted thorough cooling season maintenance on residential air conditioning system. Accessed outdoor condensing unit and removed service panel to inspect internal electrical components and connections. All wiring, including power conductors and control circuits, appeared in good condition with no signs of overheating, corrosion, or loose connections. Installed CoreSense diagnostic equipment to monitor compressor performance and electrical characteristics during system operation. This advanced diagnostic tool provides real-time analysis of compressor health and system efficiency. Connec

Completed scheduled heating maintenance on furnace system as part of ongoing service plan. Performed system diagnostics using calibrated digital manometer, recording pressure readings of 12.5 and 474 to verify proper airflow and system operation. Inspected blower motor assembly, electrical connections, and ductwork components. Noted normal operational wear including dust accumulation on blower motor housing and minor surface corrosion on wire retention brackets, though all wiring remained intact and properly secured with ground wire correctly installed. All system components found to be functioning within acceptable parameters with no immediate repairs required.

Completed scheduled preventive maintenance on residential cooling system. Performed electrical insulation resistance testing on outdoor condenser unit using megohmmeter, with readings indicating proper insulation integrity within acceptable parameters. Inspected indoor air handler blower assembly, verifying proper condition of centrifugal fan wheel and motor coupling. All components operational and system ready for cooling season.

Completed scheduled preventive maintenance visit on residential water boiler system. Performed comprehensive inspection of all internal components including electrical connections, heating elements, circulator pumps, and control systems. Verified proper operation of burner assembly, checked all wiring connections for security and signs of wear, and confirmed control panel functionality. All components found operating within normal parameters with no issues identified requiring immediate attention.

Responded to return no heat call on heating system that had previously been serviced two days prior. Upon arrival, performed diagnostic inspection of furnace components including gas valve, pressure switches, control board wiring, and ignition system. Identified intermittent heating failure and addressed underlying issue to restore proper system operation.

# HVAC Maintenance Completed Performed annual preventative maintenance on residential forced-air furnace system as part of scheduled service plan. Conducted comprehensive inspection of air handler unit, including examination of evaporator coil with diamond-pattern mesh filter showing moderate dust accumulation consistent with normal operation. Inspected blower motor assembly, electrical connections, and control components. Verified proper wire routing and secure termination of all electrical connections including red, yellow, white, black, and green conductors. Examined compressor motor mounting and hardware for stability and proper operation. All system components found to be functioning within normal parameters with no immediate repairs required.

Conducted on-site HVAC system evaluation and provided replacement options for existing air conditioning equipment. Assessed current unit condition in mechanical room, noting aging infrastructure, water damage indicators on surrounding surfaces, and equipment requiring upgrade. Documented existing system configuration including ductwork connections, electrical conduits, and drainage piping for replacement planning purposes.

Conducted estimate for HVAC system replacement at rental property where existing outdoor condenser unit sustained damage from fallen gutter. Unit exhibited extensive rust on fan guard, weathered housing, and displaced components scattered on concrete pad, indicating compromised structural integrity and operational reliability. Assessed complete system replacement needs and provided options to property owner for new equipment installation.

Completed comprehensive plumbing valve replacement in basement, removing and disposing of 17 outdated gate valves and installing new ball valves with necessary fittings throughout the horizontal piping system. Installed new pressure reducing valve assembly on vertical copper mainline, replaced main water shut-off valve, and added two frost-free hose bibs to exterior water supply system. All copper connections were properly fitted, secured with mounting brackets, and tested for proper operation and leak-free performance.

Responded to customer complaint of furnace not heating beyond 71 degrees. Upon inspection, found heavily soiled air filter restricting airflow to the system. Replaced dirty filter with new filter, restoring proper airflow and system operation. Verified furnace cycling properly and achieving desired temperature setpoint.

Completed first-year preventive maintenance on steam boiler system, including comprehensive inspection of all major components, ductwork, and piping connections. Documented existing conditions of insulated steam lines, exhaust ductwork, and distribution piping, noting age-related discoloration on PVC condensate lines and connections. All equipment found operational with no immediate repairs required at this time.

Conducted site assessment for residential property currently equipped with boiler heating system and no existing air conditioning. Evaluated basement area and electrical infrastructure to determine feasibility and options for mini-split AC installation. Documented existing 200-amp electrical panel with available breaker capacity and photographed basement layout including structural elements, support columns, and potential equipment placement locations. Provided homeowner with multiple mini-split system options to add cooling capability to the residence.

Completed comprehensive boiler maintenance prior to customer's extended absence. Performed standard preventative maintenance procedures including combustion analysis testing, which confirmed optimal oxygen levels at 14.8% and safe carbon monoxide readings at 1 ppm. Inspected and verified proper electrical connections and terminal integrity throughout the system to ensure safe and reliable operation during the unattended period.

Installed new 20-amp 120VAC electrical feed to garage, requiring trenching across yard to run underground conduit and wiring from main panel to garage structure. Excavation work included digging multiple trenches through lawn area, routing electrical service along exterior of building, and properly protecting all underground conductors per code requirements before backfilling and site restoration.

Completed comprehensive heating system maintenance on aging HVAC unit. Performed thorough inspection of blower motor assembly, electrical connections, and blower wheel, documenting equipment condition with interior component photography. All mechanical and electrical components were evaluated, with blower assembly and wiring connections found to be in acceptable operating condition despite visible dust accumulation typical of equipment age.

Performed comprehensive new homeowner system evaluation of HVAC equipment installed in confined utility space. Inspected blower motor assembly, electrical connections, ductwork integrity, and associated plumbing components including copper piping and valve assemblies. All equipment photographed and documented, with system confirmed operational and ready for homeowner occupancy.

Responded to no heat call on residential gas furnace system. Upon arrival, performed diagnostic inspection of furnace unit with red louvered front panel. Assessed internal components including blower motor assembly, control board, and electrical connections. Inspected wiring harnesses, safety controls, and ignition system. Verified proper operation of all mechanical and electrical components. System restored to full operational status with heat functioning properly.