HVAC & Air Quality Services in Shaker Heights, OH

Completed Unico air handler swap-out with successful installation and system commissioning. New Goodman condensing unit installed on exterior concrete pad with proper refrigerant line routing and electrical connections established. System operational with supply air temperature verified at 56.3°F, confirming proper cooling performance and equipment functionality.

Conducted comprehensive assessment of existing HVAC system for equipment replacement estimate. Documented interior conditions revealing significant moisture-related damage to ceiling and wall surfaces, including extensive cracking patterns on ceiling and paint deterioration on adjacent walls. Photographed deteriorated areas showing discoloration, staining, and structural concerns that will require consideration during replacement installation planning. Transferred detailed estimate information to customer file for review and approval of recommended system replacement.

Conducted on-site assessment of existing Carrier furnace system in basement utility area to provide equipment replacement options. Evaluated current HVAC installation including furnace unit, ductwork configuration, electrical sub-panel connections, and PVC condensate drainage system. Documented existing equipment specifications and installation conditions through photographic documentation to develop comprehensive replacement proposal.

Completed installation of new air conditioning system at residential property. Installed outdoor condensing unit and connected refrigerant lines to existing furnace with compatible evaporator coil. Verified all electrical connections, tested system operation, and confirmed proper cooling performance before collecting final payment balance.

Completed comprehensive cooling maintenance on two HVAC systems. Replaced air filter as needed and performed thorough inspection of humidifier system. Conducted electrical diagnostics using clamp meter to verify proper amperage draw and system performance. Inspected outdoor condensing unit electrical components including capacitor, contactor, and CoreSense diagnostic module with all connections secure and functioning within specifications. Both systems operating efficiently with no issues identified.

Completed installation warranty service for HVAC system. Installed mounting cradle for outdoor condensing unit and set up remote controller for system operation. All components secured and tested for proper functionality.

Performed comprehensive HVAC heating and cooling maintenance on residential split system with Amana furnace unit. Inspected mechanical room equipment, including furnace, ductwork, condensate drain lines, and electrical junction connections in response to reported areas with inadequate heating/cooling operation. Verified proper wiring connections at junction box, examined PVC venting and drainage systems, and assessed overall system functionality to address temperature control concerns throughout the residence.

# HVAC Install Warranty Completion Responded to second service call for HVAC system control board issue. Inspected Emerson Comfort control board assembly and verified proper installation and wiring connections. Board displayed operational status code 81 on digital readout. Documented all wire terminations including power, control, and communication wiring with multiple colored conductors properly secured to terminal blocks. Confirmed all circuit board components, integrated circuits, and connector housings were properly seated and functioning. System tested and verified operational upon completion.

Performed routine maintenance on tanked water heater system, including complete flush to remove sediment buildup and ensure optimal performance. Inspected all plumbing connections, expansion tank, pressure relief valve, and associated piping for proper operation and code compliance. All components found in satisfactory working condition with no leaks detected.

Returned to complete furnace control board replacement on gas-fired forced air unit. Removed and replaced defective integrated furnace control module, verified all electrical connections to blower motor, gas valve, and ignition system, and tested unit through complete heating cycle to confirm proper operation.

Responded to emergency water leak call with reported ceiling damage above shower stall. Upon arrival, documented extensive water damage to shower ceiling with visible discoloration, staining, and potential mold growth, along with corroded plumbing fixture in adjacent floor area showing significant rust, mineral deposits, and deteriorated surrounding subflooring. Photographed affected areas for documentation and further assessment by appropriate trades for repair.

Completed HVAC system replacement estimate for attic-installed air handling unit experiencing recurring refrigerant leaks. Documented existing equipment configuration including air handler with accessible service panels, supply ductwork, and associated drainage and refrigerant line connections in preparation for full system replacement.

Completed comprehensive electrical inspection of residential service panel and utility area. Documented all circuit breaker configurations, wiring connections, and main breaker assembly with four terminal connections. Inspected electrical conduit routing, junction boxes, and wire management throughout the mechanical space. Verified proper installation of flexible metal conduit and assessed overall electrical system condition. Photographed panel interior showing organized wire bundling in multiple colors and documented surrounding utility connections including HVAC components, plumbing lines, and gas service lines for record-keeping purposes.

Completed scheduled preventive maintenance on water boiler heating system as part of ongoing recurring service program. Inspected boiler components, piping infrastructure, and control systems including programmable water feeder unit displaying normal operational readings. Observed significant copper pipe corrosion with green patina buildup on elbow joints and connections, documented conditions with photographs for maintenance records, and verified system operational status upon completion.

Responded to no-heat call for residential boiler system. Upon arrival, confirmed unit was not operational despite gas supply and electrical power being present to the home. Performed diagnostic inspection of boiler components and internal systems. Utilized multimeter to test electrical circuits and verify power delivery to control board and ignition system. Accessed interior chamber to examine burner assembly, flame sensor, and ignition components. Identified failed ignition control or related electrical component preventing boiler startup sequence. Restored heat to residence after addressing system failure.

Performed comprehensive maintenance on two heating systems located in mechanical room. Inspected both HVAC units, verified proper operation of all components, checked ductwork connections, and confirmed all safety labels and specifications were intact. Systems found to be in good working condition with no issues identified.

Completed first-year steam boiler maintenance inspection and testing. Performed electrical diagnostics using clamp meter to verify system performance, inspected boiler grates and heat exchange surfaces for proper operation, and documented equipment condition showing normal wear patterns consistent with one year of service.

Conducted comprehensive assessment of existing forced air HVAC system to provide replacement options for residential property. Evaluated outdoor condenser unit showing significant age-related wear and weathering, along with interior ductwork configuration in confined space installation. Documented current system specifications including accessible attic-mounted air handler with insulated refrigerant lines and flexible duct connections to present customer with appropriate equipment upgrade recommendations based on existing infrastructure and access conditions.

Completed comprehensive boiler tune-up and system inspection. During service, observed and documented loose expansion tank mounting strap that requires resecuring to prevent potential tank displacement. Advised that while HVAC technician can assess the situation, a licensed plumber may be needed for proper repair of the plumbing support system. System pressure readings verified and photographed for service records.

Completed estimate for replacement of ice-damaged AC condenser on Unico high-velocity air conditioning system. Assessed exterior condensing unit damage and documented interior ductwork conditions, noting condensation present on galvanized metal ducts and filter assembly. Provided replacement options for the damaged outdoor unit while confirming interior system components remain operational.