HVAC & Air Quality Services in Shaker Heights, OH

Completed scheduled maintenance on dual outdoor air conditioning systems, both over 10 years old. Performed comprehensive inspection of both condenser units, including visual assessment of exterior cabinets, refrigerant line connections, electrical conduit, and mounting stability. Measured and recorded system temperatures, with indoor equipment reading 58.0°F at the air handler. Inspected electrical connections and wiring at both outdoor and indoor components. Noted units operating with accumulated debris around base and dust accumulation on indoor equipment housing. Both systems functional at time of service completion.

Completed routine cooling season maintenance on residential HVAC system as part of scheduled preventive maintenance program. Performed comprehensive inspection of furnace interior components including heat exchanger, blower motor assembly, control board, and electrical connections; verified all wiring connections were secure and properly terminated. Inspected exterior electrical disconnect switch and confirmed proper operation and safe electrical connections with appropriate wire terminations.

Completed comprehensive first-year preventive maintenance on residential cooling system. Performed thorough inspection of outdoor condensing unit including refrigerant line connections, electrical components, and valve assembly; verified proper operation of blower motor and air handler assembly with all electrical connections secure and functioning within normal parameters. All system components found in good working condition with no deficiencies noted.

Completed first-year cooling maintenance on Daikin RXC12AXVJU outdoor condensing unit. Performed comprehensive system inspection, verified proper refrigerant charge of R32, checked electrical connections and amperage draws, cleaned condenser coil, and confirmed unit operation within manufacturer specifications.

Conducted site evaluation for HVAC system replacement in residential property. Assessed existing furnace, air conditioning condenser unit, and associated ductwork including plenum and refrigerant line configuration. Documented current equipment specifications and installation conditions to provide comprehensive replacement options for aging cooling system.

Performed comprehensive cooling system maintenance on residential HVAC unit. Accessed outdoor condensing unit and inspected copper coil assembly, refrigerant lines, and interior components—all found to be in operational condition with normal patina present. Removed and inspected indoor evaporator coil, which exhibited heavy accumulation of dust and debris that was significantly restricting airflow and reducing system efficiency. Thoroughly cleaned evaporator coil assembly to restore proper airflow and heat transfer capacity. Reinstalled cleaned components and verified system operation. Unit is now operating at optimal performance levels with improved air circulation.

Performed diagnostic testing on outdoor A/C unit and replaced failed run capacitor. Used digital multimeter to verify electrical readings and confirm proper system operation after component replacement.

Completed comprehensive cooling system tune-up and performance evaluation. Conducted temperature differential measurements at supply registers, recording 57.3°F output, and performed moisture readings at window areas to assess indoor humidity levels and overall system efficiency. All components inspected and system operating within normal parameters.

Responded to callback for recurring water leak in utility room from air conditioning system. Previous service visit on 7/10 had addressed initial water leak, but large amounts of water were again accumulating on the floor. Performed visual inspection of the affected area and documented conditions with photographs showing the utility room layout, electrical panel, and flooring where water accumulation was occurring. Further diagnostics required to identify root cause of persistent condensate drainage issue.

Returned to complete previously scheduled maintenance work on residential air conditioning system. Performed thorough cleaning of heavily soiled evaporator coil which showed significant dirt and dust accumulation on fin assembly, restricting airflow and reducing system efficiency. Installed hard start capacitor to assist compressor during startup cycles. Completed full system maintenance including electrical diagnostics with multimeter readings confirming proper voltage supply at outdoor unit control panel. System tested and operating within manufacturer specifications upon completion.

Performed comprehensive cooling maintenance on residential HVAC system located in basement utility area. Inspected air handler unit, verified proper operation of all components, checked refrigerant levels, cleaned condensate drain lines, and tested system controls to ensure optimal cooling performance for the season.

Responded to no-cooling call where thermostat displayed 80°F while set to 77°F and outdoor compressor unit failed to operate after breaker was reset. Upon arrival, performed system diagnostics and verified electrical supply to condensing unit. Inspected disconnect box and fuse assembly, finding compromised fuses preventing power delivery to compressor. Replaced failed Edison-type fuses in outdoor disconnect, restored proper electrical connection, and verified system operation. Unit returned to normal cooling cycle with compressor engaging properly.

Conducted on-site evaluation of existing 10-year-old furnace system to provide estimate for air purification equipment installation in response to anticipated future smoke concerns. Assessed current HVAC configuration, including furnace unit, ductwork plenum, and venting system to determine compatibility and optimal placement for IAQ enhancement equipment. Documented existing system specifications and captured photos of mechanical room layout to develop comprehensive air purification solution proposal.

Installed new subpanel in exposed wooden frame wall with proper metallic flexible conduit routing and complete circuit breaker configuration across two vertical columns. Performed comprehensive panel repair work including main disconnect servicing, bus bar connections, and proper wire management for multiple branch circuits using color-coded conductors. Installed Generac transfer switch equipment with appropriate mounting, conduit connections, and integration with existing electrical infrastructure to ensure code-compliant operation.

# HVAC Cooling Maintenance Completed Performed comprehensive cooling system maintenance on rooftop unit #501. Upon arrival, conducted visual inspection of exterior equipment, noting significant rust and corrosion on metal housing and panels requiring monitoring for future replacement consideration. Accessed indoor air handler unit and replaced existing air filter with new high-efficiency filter per maintenance protocol. Per customer request, brought specialized coil cleaning solution to site and performed thorough coil cleaning on both evaporator and condenser coils to optimize heat transfer efficiency and system performance. Inspected refrigerant lines, electrical connections, and ductwork for proper operation. System tested and operating within normal parameters upon completion of maintenance visit.

Completed comprehensive cooling system tune-up for new homeowner to assess overall system condition and performance. Performed standard maintenance inspection including blower wheel assessment, system diagnostics with calibrated test instruments, and verification of proper operation across all components. Provided customer education regarding importance of regular filter replacement and blower wheel maintenance to prevent future issues including reduced efficiency, increased energy consumption, and potential component failures.

Completed installation of new air handler and heat pump system. Installed black HVAC air handler unit vertically in utility space with proper integration to existing galvanized metal ductwork, including flexible duct connection at top of unit and PVC condensate drain line at base. System tested and operational upon completion.

Completed residential generator installation estimate for property received through Generac lead program. Evaluated existing electrical service entrance, including weatherhead mast, meter location, and service cable routing on exterior wall with vinyl siding. Assessed available installation space along side yard adjacent to concrete walkway and privacy fence, noting vegetation clearance requirements and drainage considerations near foundation. Documented current electrical infrastructure configuration to determine transfer switch placement, generator pad location, and necessary electrical connections for whole-house backup power system.

Performed comprehensive preventive maintenance on a five-year-old Daikin mini split system. Inspected outdoor condenser unit, accessing internal components to examine refrigerant lines, service valves, and electrical connections. All copper refrigerant piping, insulated line sets, and valve fittings found in satisfactory condition with no visible leaks or damage. Verified proper installation of unit on concrete pad with adequate clearance. Checked condenser coils through protective grille, confirmed electrical disconnect box accessible and secure. System operating as expected with no issues identified during inspection. Confirmed contact information on file and scheduled next maintenance for 2026.

Performed scheduled generator maintenance including oil and filter change. Conducted battery system analysis using diagnostic equipment, which confirmed battery passed load testing with acceptable readings. Replaced oil filter and completed routine service checklist to ensure proper generator operation and reliability.