HVAC & Air Quality Services in Shaker Heights, OH

Conducted full system replacement estimate for a 23-year-old heating and cooling system located in attic of duplex property. Assessed existing gas furnace and air conditioning unit serving medium-sized residential space (1500-3000 sq.ft.) with natural gas energy source. Presented three-tiered replacement options: Good tier featuring Goodman A/C and gas furnace with up to 13.4 nominal SEER and 80% nominal AFUE; Better tier with Goodman equipment offering up to 14 nominal SEER and 96% nominal AFUE; and Best tier providing up to 16 nominal SEER and 96% nominal AFUE efficiency ratings. Documented existing system conditions including attic-mounted unit with accessible internal components, exposed electrical wiring, circuit boards, and mechanical assemblies. Noted black flexible ductwork with silver metallic insulation throughout attic space, PVC condensate drainage piping, and visible dust accumulation on aging components. Photographed current installation showing open access panel revealin

Completed comprehensive cooling season tune-up on dual HVAC system. Performed full system diagnostics with manifold gauges to verify refrigerant charge levels and pressures on both outdoor condensing units. Inspected all copper refrigerant lines, electrical connections, and drainage systems for proper operation and wear. All components found to be functioning within manufacturer specifications with no deficiencies noted.

Completed full air conditioning system installation including new Goodman outdoor condenser unit positioned on concrete pad and indoor evaporator coil paired with existing furnace. Installed refrigerant lines with proper insulation, established all necessary electrical connections, and configured condensate drainage system with PVC piping. System was charged with refrigerant, tested for proper operation, and verified to be cooling effectively, resolving the no-cooling condition.

Completed scheduled cooling maintenance on two HVAC systems. Performed comprehensive inspection of both units, replaced dirty air filters showing significant dust accumulation, and conducted electrical diagnostics on blower motor assembly using clamp meter to verify proper amperage draw and system performance. All components tested within normal operating parameters and systems returned to optimal cooling operation.

Completed preventive maintenance on residential cooling system with Amana furnace and air conditioning unit. Performed electrical diagnostics using clamp meter, recording amperage draw of 0.39A and voltage reading of 282.7V to verify proper system operation. Inspected condensate drain line, ductwork connections, and overall equipment condition. All components found operating within normal parameters with no issues identified.

Completed comprehensive HVAC cooling system maintenance inspection. Verified condensate pump operation and drainage system functionality, confirming proper water removal from the air handling unit. Measured supply air temperature at 53.9°F, indicating optimal cooling performance and refrigerant charge levels within manufacturer specifications.

Completed routine cooling maintenance on residential HVAC system. Inspected indoor air handler components in attic space, including condensate pump assembly with drainage lines and PVC piping. Verified proper operation of condensate removal system and checked monitoring sensors. Proceeded to outdoor condenser unit where heavy accumulation of dirt, dust, and debris was observed on coil fins and protective grilles. Cleaned condenser coils to restore optimal airflow and heat transfer efficiency. Inspected unit mounting, electrical connections, and overall system operation. All components functioning within normal parameters following maintenance completion.

Completed cooling season tune-up maintenance on residential HVAC system. Inspected condensate pump unit and exterior electrical disconnect, verified proper operation of all components, and confirmed system is functioning within normal parameters for optimal cooling performance.

Completed routine cooling season tune-up on residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit and indoor HVAC components, verified proper operation of Carrier thermostat control, and confirmed system functionality per manufacturer specifications.

Conducted comprehensive HVAC system evaluation for replacement estimate on existing Unico system with reported refrigerant leak and high repair costs from previous assessment. Inspected dual outdoor condenser units, crawlspace ductwork including flexible metal ducts and PVC condensate lines, and evaluated overall system condition to provide replacement options for the customer.

Responded to no cooling complaint on residential split system HVAC unit. Upon arrival, performed diagnostic evaluation of indoor air handler located in utility closet and outdoor condensing unit positioned at exterior of home. Inspected system components including refrigerant lines, electrical connections, and drainage piping. Verified unit specifications and manufacturer information, documented equipment condition and installation configuration for service records.

Responded to service call for damaged outdoor outlet and sauna electrical service requirements. Conducted site assessment and documented existing electrical panel configuration and basement utility area conditions. Inspected Panel 2 circuit directory showing multiple branch circuits serving various loads including laundry equipment, basement outlets, heating cables, and general lighting circuits. Evaluated unfinished basement space with exposed joists, existing electrical conduit runs, and mechanical infrastructure to determine feasibility for additional sauna circuit installation and outdoor outlet repair work.

Completed diagnostic evaluation and provided replacement options for existing Bryant furnace system located in basement utility area. Unit showed signs of age with weathered ductwork connections and typical wear patterns. Assessed accessible installation conditions and documented current equipment configuration including ductwork connections, PVC condensate drainage, and electrical components. Photographed indoor furnace unit and outdoor HVAC control equipment mounted on rooftop platform with heavily corroded support frame requiring attention during replacement. Provided comprehensive replacement estimate covering new equipment installation to address aging system components.

Reconfigured dehumidifier ductwork system by extending both supply and return lines to optimize performance and prevent the unit from counteracting the primary HVAC system. Installed 20 feet of 10-inch flexible ductwork with proper support using zip ties and black cloth strapping, and patched existing access holes with metal panels to restore system integrity.

Performed comprehensive cooling system maintenance on residential HVAC unit. Conducted inspection of air filtration system located in attic space, verified proper filter installation within ductwork housing, and examined flexible duct connections for secure attachment and adequate airflow. System components found in satisfactory operating condition with filter properly seated in cardboard frame between supply duct sections.

Responded to callback for standing water in A/C condensate drain line. Upon arrival, found approximately one inch of water remaining in drain pan from previous day's service visit. Cleared blockage from condensate line, verified proper drainage flow, and confirmed drain pan was emptying completely. System tested and operating within normal parameters with no further drainage issues observed.

# HVAC Cooling Maintenance Completed Performed comprehensive preventive maintenance on residential split-system air conditioning equipment as part of ongoing seasonal service program. Inspected vertical air handler unit with condensate management system, verified proper operation of electronic monitoring components indicated by active status lights, and confirmed secure mounting and connections. Examined outdoor condensing unit installation, verified all safety labels and manufacturer specifications were intact and legible, and inspected refrigerant line connections and electrical terminations. Confirmed condensate drain lines were clear and functioning properly, checked PVC piping and shutoff valve operation, and verified flexible ductwork connections were sealed and secure. All system components operating within normal parameters with no deficiencies noted at time of service.

Conducted comprehensive evaluation of existing HVAC system and provided full system replacement options to customer. Reviewed previous repair estimate and assessed current equipment condition. Documented existing ductwork configuration and measured installation areas to prepare accurate replacement proposals for both air conditioning unit and complete heating and cooling system upgrades.

Completed routine cooling system maintenance on outdoor condenser unit as part of recurring preventive maintenance program. Inspected condenser coils, protective grille, and external components, confirming all elements in good operational condition with no visible damage or debris obstruction. Documented equipment condition with photographic records showing clean, properly functioning cooling fins and intact protective housing.

Responded to no cooling call affecting entire residence. Upon arrival, inspected Lennox furnace and air conditioning system located in basement mechanical room. Verified thermostat operation showing 72°F set point with system calling for cooling. Checked air filter condition and found filter accessible for inspection. System components including furnace, air handler, and associated PVC condensate drainage piping visually assessed for proper installation and connections. Thermostat displaying proper communication with HVAC equipment and responding to temperature adjustments in cooling mode.